Axis 1650 Handbuch
AXIS 1650 Set-up Instructions Page 3
Unpack box
Verify that you have all the items listed below:
Install Canon Printer Driver
Important: Please install the printer driver according to the manual that came with your Canon device. The
printer driver must be installed before continuing.
LPT1 Printer Connector
Ethernet Connector
External Power Supply
Connector Power Indicator USB Connector
Network
Indicator
•Network cable
•USB cable
•Mounting clip
•Power adapter
•AXIS 1650 CD
•AXIS 1650 Set-Up Instructions
Page 4 AXIS 1650 Set-up Instructions
Connect AXIS 1650
1. Make sure the Canon device is off and unplugged and that the AXIS 1650 external power
supply is disconnected.
2. Locate the serial number, found on the underside label of the AXIS 1650, and write it
down. You will need this number to configure the AXIS 1650.
3. Connect the AXIS 1650 to the Canon device. Please refer to the correct connection procedure below for
your Canon device.
Note: For Canon devices supporting both parallel and USB connections, select one of the
connection procedures below to connect the AXIS 1650.
Connect the AXIS 1650 to the USB port using the USB cable.
Product Name
Serial Number/MAC Address
Print Server Name
For CANON Devices with USB Port
AXIS 1650 Set-up Instructions Page 5
Connect the AXIS 1650 to the printer’s parallel port, the LPT port. Secure in place by pressing in
locking clips.
4. Connect AXIS 1650 to the Ethernet connector using a network cable.
5. Turn the Canon device on and wait for ready mode.
6. Connect AXIS 1650 to the external power supply connector using the power adapter.
The power indicator will light up. When the network indicator starts to flash, the AXIS
1650 is correctly connected to the network.
For CANON Devices with LPT Port
Page 6 AXIS 1650 Set-up Instructions
Mount the Print Server (USB only)
Important: Do not drill into the Canon device; the provided wall screw is an optional wall
mount. It is recommended that you do not leave the AXIS 1650 hanging from the Canon
device, please affix to the Canon device.
The mounting clip comes with 3 parts:
• Transparent plastic holder
• Transparent plastic clip
• Wall screw
1. Peel off adhesive tape and fasten AXIS 1650 to the plastic holder. It is recommended that
the holder be affixed to the AXIS logo side of the AXIS 1650.
2. Peel off adhesive tape and fasten plastic clip to the Canon device.
It is recommended that the clip be affixed to the back side, upper right corner of the unit.
Wall Screw
Holder
Clip
For CANON MF-type Devices
AXIS 1650 Set-up Instructions Page 7
Assign IP Address
Install AXIS IP JumpStarter
1. Insert AXIS 1650 CD into CD drive.
2. An AXIS 1650 window will pop up. If auto-run is off, click on
My Computer and click on the AXIS 1650 CD and select [Open].
3. Click the blue Software link on the upper right.
4. Click the blue AXIS IP JumpStarter link to install.
5. A File Download window will appear, select Run this
program from its current location radio-button and click
[OK].
6. AXIS IP JumpStarter Setup will appear, click
[Next].
7. To install in the default destination folder, click
[Next], otherwise select another destination folder
and continue.
8. A system requirement diagnostic will run to
ensure needs are sufficient, click [Next].
9. AXIS IP JumpStarter will install, once completed be sure to check the action Create a
shortcut to AXIS IP JumpStarter on your desktop. Click [Next], then [Finish].
Page 8 AXIS 1650 Set-up Instructions
Run AXIS IP JumpStarter
1. Open AXIS IP JumpStarter. Select the AXIS 1650
from the serial number list. All AXIS1650 appear
with the default IP address 192.168.0.90. If you
are installing several AXIS 1650, check the serial
number to locate a specific AXIS 1650.
2. Select Server | Set IP Address and the Set IP Address
window appears.
3. Click the radio button that corresponds to your
choice of IP setting method (static or dynamic using DHCP). When assigning a static IP
address you also have to define the Subnet Mask and Default Gateway.
4. Click [OK] to save your settings.
5. You may be prompted to enter the server root password (by default set to <blank>), click
[OK] and the AXIS 1650 will appear in the list with the assigned IP address.
6. To verify that you have access to the AXIS 1650’s Web pages, highlight the AXIS 1650 in
the list and select Server | Server Home Page.
AXIS 1650 Set-up Instructions Page 9
Install AXIS CAPT Print Monitor
Note: Prior to installing the latest version of AXIS CAPT Print Monitor, please uninstall any
previous versions of AXIS CAPT Print Monitor.
Note: CANON FAX-L400 can utilize Standard TCP/IP port in case of Windows 2000/XP/Server 2003. Refer to the
manual of the server regarding the installation.
1. Insert AXIS 1650 CD into CD drive.
2. An AXIS 1650 window will pop up. If auto-run is off,
click on My Computer and click on the AXIS 1650 CD
and select [Open].
3. Click the Software link on the upper right.
4. Click the AXIS CAPT Print Monitor link to install.
5. A File Download window will appear, select Run this program from its current location and
click [OK].
6. CAPT Print Monitor will download. Once complete, click [Open]. If the dialog box closes,
locate the destination folder that CAPT Printer Monitor is saved to and open.
7. InstallShield Wizard will begin the CAPT Print Monitor Setup program. Click [Next].
8. Review the license agreement. If you agree and accept the terms, click [Yes].
Page 10 AXIS 1650 Set-up Instructions
9. For Windows XP/Server 2003/Vista:
Make sure that the block against the program is
removed in the Windows Firewall settings:
10. To start copying files, click [Next].
11. CAPT Print Monitor will be installed, once
completed click [Finish].
Set up port in Windows
This information applies to:
• Windows Vista
• Windows XP
• Windows Server 2003
• Windows 2000
1. Go to:
Windows Vista - Start | Control Panel | Hardware and
Sound | Printers.
Windows XP/2003 - Start | Settings | Printers and Faxes.
Windows 2000 - Start | Settings | Printers.
Select the Canon device, right click and select Properties.
Select the Ports tab. Select [Add Port].
2. Select AXIS CAPT Port and click [New Port].
AXIS 1650 Set-up Instructions Page11
3. Click Update Printer List, if the IP address you assigned to
AXIS 1650 is not on the list, enter the IP address manually.
Click [OK]. If listed, select the IP address and click [OK].
4. Click [OK] to close the Printer Ports window. Click [Apply]
to register the port.
5. Go to Printer Driver tab and click [Print Test Page] to print a
test page.
Set up port in Windows
This information applies to:
• Windows 98
• Windows ME
1. Go to Start | Settings | Printers. Select the Canon device
and right click and select Properties. Select the Details tab.
2. Select AXIS CAPT Port from the drop-down list and click
[Apply].
3. If your desired port is not in the available ports list, follow
the Add Port instructions to add the new CAPT port.
4. Go to General tab and click [Print Test Page] to print a test page.
Page 12 AXIS 1650 Set-up Instructions
Install AXIS ScanClient
If your Canon device also functions as a scanner, you can use your AXIS 1650 as a scanner server. Note: You
must have a working printing environment and the scanning software for the Canon device installed before
continuing. See your Canon device manual as well as the previous sections of this Guide.
1. Locate AXISScanClient_SetUp.exe on the AXIS 1650 CD or on www.axis.com. Start the
SetUp program by double-clicking the link or icon.
2. Select installation language and click [OK].
3. Installation is about to begin. Click [Next].
4. Accept the License Agreement. Click [Next].
5. Select Destination Location (default location is C:\Program Files\AXIS Communications\AXIS ScanClient).
Click [Next].
6. Select Start Menu Folder (default folder is AXIS ScanClient). Click [Next].
7. Check the values and click [Install] to start the
installation process.
8. After a short while AXIS ScanClient has been installed on
your computer. Click [Finish] to complete the installation.
Andere Handbücher für 1650
4
Inhaltsverzeichnis
Andere Axis Druckserver Handbücher
Axis
Axis AXIS 570 Bedienungsanleitung
Axis
Axis M7014 Bedienungsanleitung
Axis
Axis 5570e Bedienungsanleitung
Axis
Axis 540 series Bedienungsanleitung
Axis
Axis AXIS 5900 Bedienungsanleitung
Axis
Axis 5570e Bedienungsanleitung
Axis
Axis C1440AXIS - Axis 1440 Print Server Bedienungsanleitung
Axis
Axis 5800 Bedienungsanleitung
Axis
Axis 540 series Bedienungsanleitung
Axis
Axis 5570e Bedienungsanleitung
Axis
Axis 140 BJC Bedienungsanleitung
Axis
Axis C1440AXIS - Axis 1440 Print Server Installations- und Betriebshandbuch
Axis
Axis PrintPoint 1P 560/100 Bedienungsanleitung
Axis
Axis 5500 Bedienungsanleitung
Axis
Axis 5550 Bedienungsanleitung
Axis
Axis 5400+ Bedienungsanleitung
Axis
Axis 5400+ Bedienungsanleitung
Axis
Axis AXIS 5900 Bedienungsanleitung
Axis
Axis 5400+ Bedienungsanleitung
Axis
Axis 540 series Bedienungsanleitung
