Axis Axis 211 Bedienungsanleitung

ENGLISH FRANCAIS DEUTSCH ESPAÑOL

ITALIANO

AXIS 211W

Network Camera

Installation Guide

AXIS 211W Installation Guide Page 3

ENGLISH

AXIS 211W

Installation Guide

This installation guide provides instructions for installing the AXIS 211W Network Camera

on your network. For all other aspects of using the product, please see the User’s Manual,

available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.

2. Hardware overview. See page 4.

3. Install the hardware. See page 5.

4. Set an IP address. See page 6.

5. Set the password. See page 9.

6. Configure the wireless connection. See page 10.

7. Adjust the focus. See page 14.

Package contents

Item Models/variants/notes

Network camera AXIS 211W with antenna

PS-K indoor power supply

(country specific)

Europe

Australia

USA/Japan

Argentina

Korea

Terminal block connector 4-pin connector block for connecting external devices to the I/O terminal

connector

Camera stand Supplied with mounting screws

CD AXIS Network Video Product CD, including product documentation, installa-

tion tools and other software

Printed Materials AXIS 211W Installation Guide (this document)

Axis Warranty Document

Important!

This product must be used in

compliance with local laws

and regulations.

Page 4 AXIS 211W Installation Guide

Hardware overview

Dimensions

HxWxD = 38 x 88 x180mm (1.5" x 3.5" x 7")

Weight =260g (0.57 lb) (without antenna)

Network indicator LED

Network

connector

Power indicator LED

Status indicator LED and

Internal microphone

Antenna

Rear panel

Underside

Serial number

Control button

Tele/wide puller

DC-Iris

control cable

I/O terminal

connector

Power connector

Wireless indicator LED

Antenna

connector

Audio out

Audio in

Focus puller

AXIS 211W Installation Guide Page 5

ENGLISH

Install the hardware

Connect the cables and antenna

1. For indoor use, attach the antenna by screwing it into place. For outdoor use see the out-

door housing instructions.

2. Connect the camera to the network using a shielded network cable. This connection is

temporary and allows the camera’s settings to be configured via the wired network

before connecting to the wireless network.

3. Optionally connect external input/output devices, e.g. alarm devices. See page 16 for

information on the terminal connector pins.

4. Optionally connect an active speaker and/or external microphone.

5. Connect power, using one of the methods listed below:

• The supplied power connector.

• PoE (Power over Ethernet). If available, this is automatically detected when the

network cable is connected (see above).

• Connect power via the terminal connector. See page 16 for information on the

terminal connector pins.

6. Check that the indicator LEDs indicate the correct conditions. See the table on page 17

for further details. Note that some LEDs can be disabled and may be unlit.

!IMPORTANT! - The AXIS 211W is designed for indoor and outdoor use. To use

the camera outdoors, it must be installed in an approved outdoor housing.

Please see www.axis.com for more information on outdoor housings.

Page 6 AXIS 211W Installation Guide

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to

connected devices. If your network does not have a DHCP server the AXIS 211W will use

192.168.0.90 as the default IP address.

If you would like to assign a static IP address, the recommended method in Windows is

either AXIS IP Utility or AXIS Camera Management. Depending on the number of cameras

you wish to install, use the method that best suits your purpose.

Both of these free applications are available on the Axis Network Video Product CD supplied

with this product, or they can be downloaded from www.axis.com/techsup

Notes:

• If assigning the IP address fails, check that there is no firewall blocking the operation.

• For other methods of assigning or discovering the IP address of the AXIS 211W, e.g. in other

operating systems, see page 15.

Method Recommended for Operating system

AXIS IP Utility See page 7 Single camera

Small installations

Windows

AXIS Camera Management

See page 8

Multiple cameras

Large installations

Installation on a different subnet

Windows 2000

Windows XP Pro

Windows 2003 Server

AXIS 211W Installation Guide Page 7

ENGLISH

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The

application can also be used to manually assign a static IP address.

Note that the computer running AXIS IP Utility must be on the same network segment

(physical subnet) as the AXIS 211W.

Automatic discovery

1. Check that the AXIS 211W is connected to the network and that power has been applied.

2. Start AXIS IP Utility.

3. When the camera appears in the window, double-click it to open its home page.

4. See page 9 for instructions on how to assign the password.

Assign the IP address manually (optional)

1. Acquire an unused IP address on the same network segment as your computer.

2. Select the AXIS 211W in the list.

3. Click the button Assign new IP address to the selected device and enter the IP

address.

4. Click the Assign button and follow the instructions.

5. Click the Home Page button to access the camera’s web pages.

6. See page 9 for instructions on how to set the password.

Page 8 AXIS 211W Installation Guide

AXIS Camera Management - multiple cameras/large installations

AXIS Camera Management can automatically discover multiple Axis devices, show

connection status, manage firmware upgrades and set IP addresses.

Automatic discovery

1. Check that the camera is connected to the network and that power has been applied.

2. Start AXIS Camera Management. When the AXIS 211W appears in the window, double-

click it to open the camera’s home page.

3. See page 9 for instructions on how to set the password.

Assign an IP address in a single device

1. Select AXIS 211W in AXIS Camera Management and

click the Assign IP button.

2. Select Assign the following IP address and enter the IP

address, the subnet mask and default router the device

will use.

3. Click the OK button.

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of

assigning IP addresses to multiple devices, by suggesting IP

addresses from a specified range.

1. Select the devices you wish to configure (different mod-

els can be selected) and click the Assign IP button.

2. Select Assign the following IP address range and enter

the range of IP addresses, the subnet mask and default

router the devices will use.

3. Click the OK button.

AXIS 211W Installation Guide Page 9

ENGLISH

Set the password

When accessing the AXIS 211W for the first

time, the ‘Configure Root Password’ dialog

will be displayed.

1. Enter a password and then re-enter it, to

confirm the spelling. Click OK.

2. Enter the user name root in the dialog as

requested.

Note: The default administrator user name root cannot be deleted.

3. Enter the password as set above, and click OK. If the password is lost, the AXIS 211W

must be reset to the factory default settings. See page 18.

4. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the

video stream in Internet Explorer. You will need administrator rights on the computer to

do this.

The Live View page of the AXIS 211W is displayed, with links to the Setup tools, which

allow you to customize the camera.

Setup - Provides all the tools for configuring

the camera to requirements.

Help - Displays

online help on all

aspects of using

the camera.

Page 10 AXIS 211W Installation Guide

Configure the wireless connection using a network cable

Once the AXIS 211W has been connected to your network, the wireless settings can be

configured. The fastest, most secure method to configure AXIS 211W is using a wired

connection, since it disables the wireless connection and ensures greater secrecy while

entering settings. The AXIS 211W automatically searches for available network connections,

and allows only one of these to be active at a time. Configuring the AXIS 211W using an

unsecured wireless connection is not recommended, since passphrases and keys saved will

be sent in plain text.

Open the wireless settings from Setup > Basic Configuration > Wireless.

Note: For even greater security use HTTPS. Go to Setup > System Options >

Security > HTTPS and refer to the camera’s online help.

Status of Wireless Networks

This list is the result of a network scan. Access points with a disabled SSID Broadcast will

not appear unless the camera is linked to it. The network the AXIS 211W is currently linked

to is shown in blue. A network using unsupported security is shown in grey. The following

information is provided:

•SSID - The name of a wireless network (or ad-hoc device). If the same name occurs

several times this means that several access points for that network were found. The

AXIS 211W cannot be configured to be linked to only one particular access point.

•Mode - An Access Point (Master) or Ad-Hoc device.

• Security - Shows which type of security the network uses. See below for the

supported security types.

•Channel - Shows the wireless channel currently in use.

•Signal strength - Shows the signal strength.

•Bit rate - The current bit rate in Mbit/s. This is only shown for the access point

currently in use.

Andere Handbücher für Axis 211

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Axis Sicherheitskamera Handbücher

Axis

Axis Videolarm 25734 Merkblatt

Axis

Axis M5075-G Bedienungsanleitung

Axis

Axis Q3517-LV Bedienungsanleitung

Axis

Axis AXIS P1425-LE Mk II Bedienungsanleitung

Axis

Axis XF60-Q2901 Bedienungsanleitung

Axis

Axis P8513 Bedienungsanleitung

Axis

Axis P3827-PVE Bedienungsanleitung

Axis

Axis 01914-001 Bedienungsanleitung

Axis

Axis P5522-E PTZ Bedienungsanleitung

Axis

Axis Q1635 Bedienungsanleitung

Axis

Axis P3224-VE Mk II Bedienungsanleitung

Axis

Axis M32-LVE Series Bedienungsanleitung

Axis

Axis Q1910-E Bedienungsanleitung

Axis

Axis P3245 Series Bedienungsanleitung

Axis

Axis P1365-E Bedienungsanleitung

Axis

Axis P32-LV Mk II Series Bedienungsanleitung

Axis

Axis M5000-G Bedienungsanleitung

Axis

Axis M5013-V Bedienungsanleitung

Axis

Axis P3364-VE Bedienungsanleitung

Axis

Axis AXIS P1354-E Bedienungsanleitung

Axis

Axis AXIS P3353 Bedienungsanleitung

Axis

Axis P8524 Bedienungsanleitung

Axis

Axis V5925 Bedienungsanleitung

Axis

Axis M31 SERIES Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung