Axis AXIS 240 Bedienungsanleitung

Quick Installation Guide

This guide covers the installation and basic setup procedures for your

AXIS 240. Should you require more detailed instructions, please

refer to the AXIS 240 User’s Manual that is available via the Axis

WWW Home Page at

http://www.axis.com/salessupport/manuals.html#camera

Installing the AXIS 240

Your AXIS 240 can service up to 4 coax/BNC cameras and one

S-video camera.

Follow these instructions to install your AXIS 240:

1. Record the serial number of your AXIS 240. Please note that the

serial number is identical to the Ethernet address of the unit.

2. Connect the camera(s) to the camera port(s) of the AXIS 240

using the appropriate connectors. Optionally, you can connect a

Pan/Tilt device to the RS232 serial output for automated

adjustment of the camera orientation.

3. Connect your AXIS 240 to the network using an Ethernet

10baseT connector.

4. Connect the external power supply (Axis type PS-D), to the

AXIS 240 and check that the Power indicator is lit.

5. Acquire an unused Internet address for your AXIS 240.

6. Assign the Internet address to your AXIS 240 using the method

applicable to your network environment:

Windows 95, Windows NT

Start a DOS window and type the following commands:

Example:

arp -s 192.168.3.191 00-40-8c-10-00-86

ping 192.168.3.191

arp -s <Internet address> <Ethernet address>

ping <Internet address>

In Windows 95, you cannot use ARP if you have an empty

ARP table. Type arp -a to display the ARP table. If it is

empty, you must ping an existing unit on your network before

setting the Internet Address of your AXIS 240.

UNIX

Type the following commands:

Example:

arp -s 192.168.3.191 00:40:8c:10:00:86 temp

ping 192.168.3.191

7. Access the AXIS 240 by entering the Internet address (URL) into

the location field of your Web browser.

Example:

http://192.168.3.191/

8. Adjust the focus of the cameras. Reload your Web browser to test

your adjustments.

The installation is complete and you can now include pictures taken

by the cameras into your own applications.

Taking Snapshots

To trigger a camera snapshot, simply enter the URL of your AXIS

240 into the location field of your Web browser.

These snapshot types are available within the AXIS 240:

To integrate live snapshot images into your own applications and

web pages, refer to the URL of the AXIS 240 as detailed below:

Example:

http://192.168.3.191/fullsize.jpg?camera=1

Example: ( Adding an HTML reference)

<IMG SRC=”http://192.168.3.191/fullsize.jpg?camera=2”

ALT=”A fullsize JPEG Image from Camera 2”>

Note:

arp -s <Internet address> <Ethernet address> temp

ping <Internet address>

File name Description

fullsize.jpg Full size JPEG snapshot. Generation time = 0.5 sec

halfsize.jpg Half size JPEG snapshot. Generation time = 0.3 sec

lastshot.jpg The last snapshot taken by the camera, either “full

size” or “half size”.

hugesize.jpg The highest resolution snapshot available. As

opposed to the ‘fullsize’ and ‘halfsize’ images, this

type of snapshot is software generated. Generation

time = 18 sec

zoom.jpg Derived from the from the center of ‘hugesize’.

Generation time = 8 sec

To specify the camera source, you must add the CGI parameter

?camera=<n> to your URL request. If omitted, the default

camera will be used.

The CRON Script

The AXIS 240 includes a CRON script service that facilitates

periodic command execution. It allows you to program event and/or

time triggered functions within the AXIS 240.

From the AXIS 240 Home Page, you can access an on-line editor for

generating the CRON script file. Alternatively, you can use a

common text editor and download the file via ftp.

For example, you can program the AXIS 240 to store a new fullsize

image on an ftp server every 5 minutes.

The AXIS 240 can also be activated by logical transitions on its input

ports. Thus, by connecting a digital microcircuit to an entrance

door, the AXIS 240 could be triggered to take a snapshot on each

occasion the door opens and then, for example, send an e-mail with

the snapshot to an operator.

Refer to the AXIS 240 User’s Manual for more information.

EyeGet - the JPEG Script

When using the AXIS 240 over the Internet, we recommend that it

is accessed over an assisting web server and not directly. This is

because the AXIS 240 has limited capacity for handling the extra

amount of buffering that the Internet may generate.

Axis has developed a JPEG collector program that periodically

collects JPEG snapshots from your AXIS 240 and writes them to a

local file on your web server for later retrieval.

The program is called EyeGet and is available in both Windows and

UNIX versions. You can download EyeGet free of charge from

http://www.axis.com/products/axis_neteye_200/scripts.shtml

Point to Point Protocol (PPP)

PPP support allows you to use your AXIS 240 remotely, just as if it

were on your local network. Any PPP capable host can be used to

dial into the AXIS 240.

PPP configuration for a Windows 95 host

Follow these instructions to configure PPP from a Windows 95 host:

1. Connect the remote modem to the serial port of the AXIS 240

(US Robotics modem recommended).

2. From the Windows desktop, double-click on the My Computer

icon and then open Dial-Up Networking.

3. Double-click on Make New Connection. From within this

dialog, define a <name> that describes the connection you are

creating in the ‘Type name for the computer you are using’ field.

Select a local modem from the displayed modem list.

4. Click on the Configure button to enter the modem Properties

page. Accept all default settings, but ensure that modem speed is

compatible with your modem and does not exceed 38,400 bps,

which is the maximum serial port speed for the AXIS 240.

5. Click the Connection tab and then click the Advanced button.

Check the Hardware (RTS/CTS) radio button. Click OK to

return to the ‘Make new connection’ dialog.

6. Enter the relevant phone number information for the remote

modem connected to your AXIS 240. Click Next.

7. Click Finish. The system then proceeds to build the Driver

information database and your connection dialog will then

subsequently appear in the Dial -Up Networking dialog.

Accessing the remote AXIS 240

Follow these instructions to dial out to a remote AXIS 240.

1. Double-click on the newly created icon to establish a modem

connection for your remote AXIS 240.

2. Enter your User name and Password an then Click Connect. The

status dialogs "dialing" and "logging onto the network" are

presented prior to the display of a Connected to <name> dialog

that will confirm a successful connection.

3. You can now access the AXIS 240 by simply entering its Internet

address (URL) into the location field of your Web browser.

Please ensure that you are not using a a proxy server (Netscape:

Options menu\Select Network\Proxies).

Please refer to the AXIS 240 web pages should you wish to use

PPP from another host, i.e. Windows NT or UNIX.

Please refer to your Windows 95 user documentation if your

computer does not have dial up networking installed.

Axis Communications

URL: www.axis.com

Lund

Phone: +46 46 270 18 00

Boston

Phone: +1-800-444-AXIS, +1 (781) 938 1188

Paris

Phone: +33 1 49 69 15 50

London

Phone: +44 171 553 92 00

München

Phone: +49 89 95 93 96 0

Tokyo

Phone: +81 3 3545 8282

Singapore

Phone: +65 250 8077

Hong Kong

Phone: +852 2836 0813

Beijing

Phone: +86 10 6510 2705

Shanghai

Phone: +86 21 6445 4522

Taipei

Phone: +886 2 8780 5972

Seoul

Phone: +82 2 780 9636

AXIS 240 Quick Installation Guide

Part No: 15807

Revision: 1.0, Date: February 1998

Andere Handbücher für AXIS 240

Inhaltsverzeichnis

Andere Axis Server Handbücher

Axis

Axis S2108 Bedienungsanleitung

Axis

Axis 240Q Blade Bedienungsanleitung

Axis

Axis AXIS 243Q Blade Bedienungsanleitung

Axis

Axis NETEYE 200 Bedienungsanleitung

Axis

Axis NETEYE 200 Bedienungsanleitung

Axis

Axis 282 Bedienungsanleitung

Axis

Axis 200+ Bedienungsanleitung

Axis

Axis 2400+ Bedienungsanleitung

Axis

Axis 700 Bedienungsanleitung

Axis

Axis 291 1U Bedienungsanleitung

Axis

Axis Camera Station S1216 Tower Bedienungsanleitung

Axis

Axis 291 1U Bedienungsanleitung

Axis

Axis Camera Station S1216 Tower Bedienungsanleitung

Axis

Axis E100 Bedienungsanleitung

Axis

Axis Q7900 Rack Bedienungsanleitung

Axis

Axis Developer Board and Device Server AXIS 82+ Bedienungsanleitung

Axis

Axis 282 Bedienungsanleitung

Axis

Axis AXIS StorPoint CD Bedienungsanleitung

Axis

Axis 70 Bedienungsanleitung

Axis

Axis 2400AM Bedienungsanleitung

Axis

Axis 241Q Blade Bedienungsanleitung

Axis

Axis 950 Bedienungsanleitung

Axis

Axis 240Q Blade Bedienungsanleitung

Axis

Axis 250S Blade Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung