3.) The camera can be mounted
on any flat surface. Once
it is mounted, you can use
the screws to adjust the
angle of the camera so it is
pointed where you want it.
Remember that the camera
can pan and tilt.
4.) Plug the power supply
into the wall or extension
cord (must be dry). From
a computer, log in to your
ayrmesh.com account.
The camera will show up on your ayrmesh.com account in 5 to 10 minutes. Note that
the username and password you log in with at ayrmesh.com are also the username and
password needed to log in to your camera(s) and router.
5.) To view the camera, log in to ayrmesh.com. Scroll down the page to the Cameras section.
Select the camera you want to view and click on the Internal (LAN) Link. When prompted,
log in to the camera using your ayrmesh.com username and password. Click on Simple
Mode to see the picture from the camera. Adjust the Camera and Mounting Base so you
see exactly what you want to see. When you are away from your home network, view your
camera(s) by clicking on the External (Internet) Link.
Ayrstone AyrScout Indoor Camera Setup 4
