Dedicated sub-base for
the burner controller BC-R
BC-R05
User's Manual
Thank you for purchasing the BC-R05 dedicated sub-base for
the BC-R burner controller. This manual contains information
for ensuring the correct use of the dedicated sub-base for the
BC-R.
This manual should be read by those who design and maintain
devices that use the BC-R Series.
Be sure to keep this manual nearby for handy reference.
Please read the "Terms and Conditions" from the following URL
before ordering or use:
http://www.azbil.com/products/bi/order.html
Be sure that the user receives this manual before the product is
used.
Copying or duplicating this user’s manual in part or in whole is for-
bidden. The information and specifications in this manual are sub-
ject to change without notice.
Considerable effort has been made to ensure that this manual is
free from inaccuracies and omissions. If you should find an error or
omission, please contact the azbil Group.
In no event is Azbil Corporation liable to anyone for any indirect,
special or consequential damages as a result of using this product.
© 2014 Azbil Corporation All Rights Reserved.
SAFETY PRECAUTIONS
Safety precautions are for ensuring safe and correct use of this
product, and for preventing injury to the operator and other
people or damage to property. You must observe these safety
precautions. Also, be sure to read and understand the contents
of this user's manual.
WARNING
• Ensure you turn o the power of this device and all auxil-
iary devices when mounting, removing or connecting the
wires of this device. There is a risk of electrical shock.
• Do not touch electrically charged parts such as the pow-
er supply terminals. Doing so might result in an electric
shock.
• Do not disassemble this device.
Model number Product name Quantity Notes
BC-R05A100 Dedicated sub-base 1
CP-UM-5730E User manual 1 This document
is device is a dedicated sub-base for the burner controller BC-R
series.
issub-baseshouldbemountedonapanelorthelike.econtroller
itselfisthenmountedonthesub-base.
CAUTION
• Mounting, wiring, maintenance, inspection, calibration,
etc. should be carried out by a professional with techni-
cal training in combustion systems and ame safeguard
control devices.
• Do not install where exposed to any of the following:
• Certain chemicals or corrosive gases (ammonia, sulfur,
chlorine, ethylene compounds, acids, etc.)
• Dripping water or excessive humidity
• High temperatures
• Sustained long-term vibration
• For mounting and wiring, follow the instructions in this
user's manual or in the combustion equipment manufac-
turer's manual.
• If a protective structure of IP40 or higher rating is re-
quired, use the sideboard (sold separately), or put the
unit inside a panel that has an IP40 or higher protective
structure.
■Cautions regarding Installation
•Takespace50mmaboveandbelow,50mmtotheleandright,
and80mmto thefront,as space for removal, wiring, and
maintenance.Also,donotinstallthisdeviceclosetoelectric
powerdevicesorothersourcesofheat.
•isdevicemustinstallwithinagroundedandconductivecon-
trolpaneltoensuresafety.
•Donotpullthewiringwhileitisattachedtothedevice.Doingso
cancausefailuresoftheconnectorsorthisdeviceitself.
NOTICE
Warnings are indicated when mishandling this product
might result in death or serious injury to the user.
WARNING
Cautions are indicated when mishandling this product
might result in minor injury to the user, or physical damage
to this product.
CAUTION
Warnings are indicated when mishandling this product
might result in death or serious injury to the user.
WARNING
Cautions are indicated when mishandling this product
might result in minor injury to the user, or physical damage
to this product.
CAUTION
PLEASE CHECK
OVERVIEW
MOUNTING
50 mm 80 mm
Front
Wiring, ducts, etc.
BC-R
main unit
50 mm
50 mm
50 mm
50 mm
50 mm
1
CP-UM-5730E
