Azbil Corporation Safety
KUX60G / KUX70G - Field mount type P/I converter iii
• When removing this instrument from the process for maintenance, be especially
careful of residual pressure or any residual fluid remaining in the process line or in
the instrument.
• When carrying out venting or draining, check the direction of the venting or
draining and take precautions to prevent it from coming into contact with the
human body. Failure to do so may result in burns or physical injury.
• If the instrument is used in an explosion-proof area, do not leave the Product
uncovered to avoid sparks or ignition.
CAUTION
This instrument is shipped under strict product control by Azbil Corporation. Do
not modify the instrument under any circumstances as this could result in permanent
damage to the instrument.
Cautions on use of communication devices
CAUTION
Using a transceiver, cellular phone, pager, etc. near this instrument may prevent the
instrument from functioning correctly depending on the transmission frequency being
used. Observe the following precautions.
• Check beforehand the distance at which the communication device will not affect
the correct operation of this instrument. Always use the communication device at a
greater distance than this.
• Use the communication device after putting the cover on the Product.
