Aztech 100U Produktinformationsblatt

Windows®98 Second Edition, Windows®Me, Windows®XP and Windows®2000 supported

Easy Start

(Read Me First)

Version 1.5

Protocols Discussed:

RFC 1483

RFC 1577

RFC 2364

RFC 2516

ADSL USB Modem

Contents...

Safety Guidelines ..................................................... 2

About this Easy Start ............................................... 2

Package.................................................................. 2

LED Indicators ........................................................ 3

Step 1: Connecting the ADSL USB Modem ................ 4

Step 2: Installing the ADSL USB Modem Driver ......... 5

2.1 For Windows® XP .............................. 5

2.2 For Windows® Me.............................. 7

2.3 For Windows® 98 Second Edition ........ 8

2.4 For Windows® 2000 .......................... 9

Step 3: Running ADSL Modem Setup Program .......... 10

Step 4: Configuring the IP Settings (For RFC 1577

protocol only) ............................................ 12

4.1 For Windows® XP ............................. 12

4.2 For Windows® Me / Windows® 98

Second Edition .................................. 13

4.3 For Windows® 2000 ......................... 15

Step 5: Setting the PVCs values .............................. 16

Step 6: Establishing the Internet Connection ............. 16

(for RFC 2364 and RFC 2516 only)............. 16

ADSL USB Modem Easy Start

Package

Please check that you have the following items in your package. If you found

any missing items, please contact your dealer immediately.

(The actual cables that are included with your package may differ in appearance from country to

country)

Telephone extension cable

this Easy Start

USB cable

Installation CD

Product warranty does not apply to damage caused by lightning, power surges or wrong voltage.

ËÌ

ÍÎ

ADSL USB Modem

Safety Guidelines

•Keep the modem away from fluid, direct sunlight and excessive heat

•During times of lightning strike/thunderstorm, do not use the modem

•This product is for use only in UL Listed computers

•To reduce the risk of fire, use only No. 26 AWG or larger telecommunication

line cord

About this

Easy Start

This booklet contains information on setting up your

ADSL USB Modem. It touches on the key installation

procedures to help you setup your modem in a breeze!

ÏMicro-Filter

(optional)

1 Micro-Filter is only required for product model with '(M)'. If you are unsure of your product

model, refer to the label on your modem casing (e.g. DSL100U(M)). The Micro-Filter may or may

not be bundled with your package, depending on country purchased. If it is not bundled, you

may purchased it separately from your dealer.

ADSL USB Modem Easy Start

LED Indicators

Ê POWER

Ë ADSL LINK

Ê POWER

LEDs Activity Descriptions

Lights up When you have connected your modem to the

computer. Your computer must also be powered

on for the LED to light up.

Off i. You have not connected your modem to your

computer properly. See Step 1 - Connecting

Your ADSL USB Modem.

ii. You have not powered on your computer.

If problem persists, contact your dealer immediately.

ËADSL LINK

LEDs Activity Descriptions

Flashes Your modem is trying to establish an ADSL

connection.

Lights up When the ADSL connection is established.

If the ADSL Link LED keeps flashing and does not remain lit up, it

could be that your ADSL services has not been activated. Please

contact your ADSL Service Provider.

ADSL USB Modem Easy Start

Step 1: Connecting the ADSL USB Modem

With the "Hot Swap" feature in this modem, you can connect your modem to your

computer anytime, without having to power off your system!

Carry out the connections as illustrated.

ÊConnect one end of the USB cable ( ) to the USB Port on your

modem and the other end ( ) to the USB port of your computer.

ËConnect one end of the telephone extension cable to the Line Jack on your

modem and the other end to the telephone wall socket.

ÌA telephone set can be connected to the Tel Jack on your modem.

(This optional connection enables you to use your telephone and your modem

concurrently.)

2 Micro-Filter is only required for product model with '(M)'. If you are unsure of your product model,

refer to the label on your modem casing. For details on the usage of the Micro-Filter, please refer

to the Frequently Asked Questions section, 'Do I need to use Micro-Filter when using ADSL?'

Telephone set

Telephone

wall socket

Telephone

extension

cable

USB cable

USB port

USB Port

TEL jack

LINE jack

Micro-Filter 2

ADSL USB Modem Easy Start

2.1 Installing the ADSL USB Modem Driver

- For Windows® XP

Power on your computer (if it is not powered on during connection). If you have

connected the USB cable from your computer to your modem as illustrated in Step

1, you will be prompted for the following driver installation.

Windows will detect your new device as USB device.

i. Place the Installation CD into your CD-ROM Drive.

Select Install from a list or specific location (Advanced) and click Next.

Step 2: Installing the

ADSL USB Modem Driver

The following contains the driver installation instructions for protocols RFC 1483,

RFC 1577, RFC 2364 and RFC 2516. You only need to install one of them, as

determined by your ADSL Service Provider.

1. For Windows® 98 Second Edition users, depending on your system’s

configurations, you may be prompted for your Windows CD-ROM dur-

ing the driver installation. Have it ready by your side.

2. The screen shots, screens information and steps illustrated in this

manual serve only as a guide. The exact information and steps you

see on your system may vary, depending on your system configu-

rations. For any dissimilarities, follow closely to the instructions

as prompted on your PC screen.

ADSL USB Modem Easy Start

ii. Click the option Include this location in the search.

Click Browse and navigate to your Installation CD for the required protocol

folder (RFC1483, RFC1577, RFC2364 or RFC2516 as determined by your

ADSL Service Provider).

Click Next.

(The example is based

on RFC2364)

Allow some time for the system to install the driver.

iv. Click Finish and proceed with the second stage of installation - Step 3:

Running ADSL Modem Setup Program.

iii. At the following prompt, click Continue Anyway. (This prompts occurs when

Windows does not have the record of your latest driver).

ADSL USB Modem Easy Start

2.2 Installing the ADSL USB Modem Driver

- For Windows® Me

Power on your computer (if it is not powered on during connection). If you have

connected the USB cable from your computer to your modem as illustrated in Step

1, you will be prompted for the following driver installation.

Windows will detect your new device as USB device.

i. Place the Installation CD into your CD-ROM Drive.

Select Specify the location of the driver (Advanced) and click Next.

ii. Select Specify a location.

Click Browse and navigate to your Installation CD for the required protocol

folder (RFC1483, RFC1577, RFC2364 or RFC2516 as determined by

your ADSL Service Provider).

Click Next.

iii. Click Next again to proceed installation with the specified driver.

iv. Click Finish and proceed with the second stage of installation - Step 3:

Running ADSL Modem Setup Program.

(The example is based

on RFC2364)

ADSL USB Modem Easy Start

2.3 Installing the ADSL USB Modem Driver

- For Windows®98 Second Edition

Power on your computer (if it is not powered on during connection). If you have

connected the USB cable from your computer to your modem as illustrated in

Step 1, you will be prompted for the following driver installation.

Windows will detect your new device as USB device.

i. Place the Installation CD into your CD-ROM Drive and click Next.

ii. Select Search for the best

driver for your device

(Recommended) and click

Next.

iii. Select Specify a location.

Click Browse and navigate

to your Installation CD for

the required protocol folder

(RFC1483, RFC1577,

RFC2364 or RFC2516 as

determined by your ADSL

Service Provider).

Click Next.

iv. Click Next to proceed installation with the specified driver.

v. Click Finish and proceed with the second stage of installation - Step 3:

Running ADSL Modem Setup Program.

(The example is based on RFC2364)

ADSL USB Modem Easy Start

2.4 Installing the ADSL USB Modem Driver

- For Windows®2000

Power on your computer (if it is not powered on during connection). If you have

connected the USB cable from your computer to your modem as illustrated in

Step 1, you will be prompted for the following driver installation.

Windows will detect your new device as USB device.

i. Place the Installation CD onto your CD-ROM Drive and click Next.

ii. Select Search for a suitable driver for my device (recommended) and

click Next.

iii. Select Specify a location and click Next.

iv. Click Browse and navigate to your Installation CD for the required protocol

folder (RFC1483, RFC1577, RFC2364 or RFC2516 as determined by

your ADSL Service Provider).

Click OK.

(The example is based

on RFC2364)

ADSL USB Modem Easy Start

Step 3: Running ADSL Modem

Setup Program

i. At the following Welcome prompt, click Next. The detection of the hardware

will begin.

For Windows® XP

You may be prompted a few times with the following window. This happens

when Windows does not have the record of this latest driver. Click Continue

Anyway to proceed. Proceed with step ii.

v. Click Next again to proceed installation with the specified driver.

vi. Click Finish and proceed with the second stage of installation. See Step

3: Running ADSL Modem Setup Program.

Andere Handbücher für 100U

Andere Aztech Modem Handbücher

Aztech

Aztech MR2800-W Bedienungsanleitung

Aztech

Aztech 206U Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech DSL905E Series Bedienungsanleitung

Aztech

Aztech 305E Bedienungsanleitung

Aztech

Aztech DSL1015EN L Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech DSL500U Produktinformationsblatt

Aztech

Aztech MDP3880 Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech HomePlug AV Wireless N Extender Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech 56K External Modem Gebrauchsanweisung

Aztech

Aztech MDP3858U Series Bedienungsanleitung

Aztech

Aztech MSP3880W Series Bedienungsanleitung

Aztech

Aztech DSL700P Bedienungsanleitung

Aztech

Aztech DSL5028EN Gebrauchsanweisung

Aztech

Aztech DSL5018EN(1T1R) Gebrauchsanweisung

Aztech

Aztech MR8800-U Bedienungsanleitung

Aztech

Aztech MSP2950(W) Bedienungsanleitung

Aztech

Aztech MSP3885 Gebrauchsanweisung

Aztech

Aztech DSL705EU Handbuch

Aztech

Aztech ADSL USB Modem Produktinformationsblatt

Aztech

Aztech ADSL2/2+ Modem Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung