Aztech 56K External Modem Produktinformationsblatt

Easy Start

Easy Start Page 1 of 16

56K USB Modem

Easy Start

Version 2.0

Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.

This product is for use only in UL Listed computers.

To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

Easy Start

Easy Start Page 2 of 16

Table of Contents

Preliminary Pages Page

Table of Contents...................................................................................................................2

Chapter 1 - About this Easy Start.........................................................................................6

1.1 Minimum System Requirements......................................................6

1.2 Package.............................................................................................6

Chapter 2 - Connecting The Modem To Your Computer....................................................7

Chapter 3 - Installing Your Modem Driver .........................................................................8

3.1 Installing your Modem Driver for Windows 98 Second Edition.....8

3.2 Installing your Modem Driver for Windows 2000.........................10

3.3 Installing your Modem Driver for Windows ME...........................12

3.4 Installing your Modem Driver for Windows XP Service Pack 1...14

3.5 Installing your Modem Driver for Windows XP Service Pack 2...15

3.6 Verifying Your Modem..................................................................15

Chapter 4 - Uninstalling Your Modem Driver...................................................................16

Easy Start

Easy Start Page 3 of 16

Warning & Safety Messages…

WARNING!

Before installing the Modem card ensure the PC is switched OFF and the mains

cord removed. If servicing the Modem card ensure the PC is switched OFF, the

mains cord unplugged and the Telecommunications Line cord is disconnected

from the Modem Card.

EUROPEAN NETWORK COMPATIBILITY DECLARATION

This product is designed to interwork with the Public Switched Telecommunication Networks in

UK, Ireland, Netherlands, Sweden, Denmark , Finland, Switzerland, Luxembourg, Belgium,

France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria.

The equipment may have interworking difficulties in PSTN networks in other countries. Please

contact your equipment supplier if it is desired to use the equipment on another network.

Electrical Safety

Before installing this equipment you must ensure that the power drawn by this card, together

with the host and any auxiliary cards drawing power from the host, is within the rating of the host

power supply.

The equipment must be installed such that with the exception of the connections to the host,

clearance and creepage distances shown in the table below are maintained between the card and

any other assemblies that use or generate a voltage shown in the table.

The larger distance shown in brackets applies where the local environment within the host is

subject to conductive pollution or dry non-conductive pollution which could become conductive

due to condensation. Failure to maintain these minimum distances would invalidate the approval.

‘The analogue telecommunications interface is intended to be connected to telecommunication

network voltage (TNV) circuits which may carry dangerous voltages. The telephone cord must

remain disconnected from the telecommunications system until the card has been installed within

a host which provides the necessary protection of the operator.

Safety level of the various connectors:

• Telephone Line Connector = TNV3

• PCI connector = SELV

These indications are classified as per safety standards EN60950/A4:

• TNV3: Telecommunications Network

• Voltage

• SELV: Safety Extra Low Voltage

Easy Start

Easy Start Page 4 of 16

Pan European Approval Regulatory Note

The equipment has been approved under CTR21. For such product, the following statement is

required: “This equipment has been approved in accordance with Council Decision 98/482/EC

for Pan European single terminal connection to the Public Switched Telephone Network (PSTN).

However, due to differences between the individual PSTNs provided in different countries the

approval does not, of itself, give an unconditional assurance of successful operation on every

PSTN network termination point. In the event of problems, you should contact your equipment

supplier in the first instance”

Network Compatibility Declaration

This product is designed to interwork with the Public Switched Telecommunication Networks in

UK, Ireland, Netherlands, Sweden, Denmark , Finland, Switzerland, Luxembourg, Belgium,

France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria.

New Zealand Telecom Warnings

General

“The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has

accepted that the item complies with minimum conditions for connection to its network. It

indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.

Above all, it provides no assurance that any item will work correctly in all respects with another

item of Telepermitted equipment of a different make or model, nor does it imply that any product

is compatible with all of Telecom’s network services.”

“This equipment does not fully meet Telecom’s impedance requirements. Performance

limitations may occur when used in conjunction with some parts of the network. Telecom will

accept no responsibility should difficulties arise in such circumstances.”

“This equipment shall not be set up to make automatic calls to the Telecom ‘111’ Emergency

Service.”

“If a charge for local calls is unacceptable, the ‘Dial’ button should NOT be used for local calls.

Only the 7-digits of the local number should be dialed from your telephone. DO NOT dial the

area code digit or the ‘0’ prefix.”

This equipment may not provide for the effective hand-over of a call to another device connected

to the same line.

Important Notice

Under power failure conditions, this telephone may not operate. Please ensure that a separate

telephone, not dependent on local power, is available for emergency use.”

“Some parameters required for compliance with Telecom’s Telepermit requirements are

dependent on the equipment (PC) associated with this device. The associated equipment shall be

set to operate within the following limits for compliance with Telecom’s Specification:

Easy Start

Easy Start Page 5 of 16

1. There shall be no more than 10 call attempts to the same number within any 30 minute period

for any single manual call initiation.

2. The equipment shall go on-hook for a period of not less than 30 seconds between the end of

one attempt and the beginning of the next attempt.

3. Where automatic calls are made to different numbers, the equipment shall go on-line for a

period of not less than 5 seconds between the end of one attempt and the beginning of the

next attempt.

4. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of

receipt of ringing.”

“All persons using this device for recording telephone conversations shall comply with New

Zealand law. This requires that at least one party to the conversation is to be aware that it is

being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied

with in respect to the nature of the personal information collected, the purpose for its collection,

how it is used and what is disclosed to any other party.”

Note…

Keep the modem away from fluid, direct sunlight and excessive heat. During

times of lightning strike / thunderstorm, do not use the modem.

Easy Start

Easy Start Page 6 of 16

Chapter 1 - About this Easy Start

This booklet contains information on setting up your 56K USB Modem. It touches on the key

installation procedures and allows you to setup your modem within minutes!

1.1 Minimum System Requirements

• Pentium®MMX 233MHz

• A free USB Port

• A CD-ROM Drive

• 32MB RAM for Windows® 98 Second Edition

64MB RAM for Windows® Me

128MB RAM for Windows® 2000 / Windows® XP

• Host Operating Systems support for USB:

• Windows® 98 Second Edition / Windows® 2000 / Windows® Me / Windows®

1.2 Package

For any missing items, please contact your dealer immediately.

Note…

The actual cables that come with your package may differ in appearance from

country to country.

56K USB Modem Installation CD Telephone Extension Cable RJ-11

Easy Start Manual

The optional telephone extension cable used for this modem is a UL Listed Communication

Circuit Accessory, minimum 26AWG.

Easy Start

Easy Start Page 7 of 16

Chapter 2 - Connecting The Modem To Your Computer

The 56K USB Modem is a 'plug-n-play' device. You may connect your modem to your computer

anytime without having to power down your system. Connect as follow and your Windows will

immediately detect the new hardware and prompt for its driver.

1. Connect one end of the telephone extension cable to the LINE jack on Modem and the

other end to your Telephone Wall Socket.

2. Connect the USB cable of the Modem to the USB port on your computer.

This completes the modem connections. Please proceed to Chapter 3.

USB Port

Rear of PC

Telephone

Extension

Cable

Telephone

Wall

Socket

56K USB Modem

Easy Start

Easy Start Page 8 of 16

Chapter 3 - Installing Your Modem Driver

3.1 Installing your Modem Driver for Windows 98 Second Edition

a. If your modem is connected as illustrated in Chapter 2, you will be prompted for the

modem driver.

Figure 1 : Prompted for Driver

b. Place the

Installation CD into your CD-ROM Drive and click Next. See Fig 1.

c. Click the option Search for the best driver for your device. (Recommended) and

Click Next. See Fig 2.

Figure 2 : Search for New Drivers

d. Click Specify a location. Click Browse. Navigate to the '\Win98SE' folder on the

Installation CD. Click OK. Click Next to proceed. (The screen shot uses the CD-

ROM drive letter D as an example. You should see the letter of your CD-ROM

drive.) See Fig 3.

Easy Start

Easy Start Page 9 of 16

Figure 3 : Specifying Location

e. Windows will prompt that it has located the driver. Click Next to proceed. See Fig 4.

Figure 4 : New Driver Found

(Depending on your system configurations you may be prompted for your Windows

CD-ROM. Replace the installation CD with your Windows CD-ROM and click

OK. At the copying files dialog box, enter the path of your windows CD-ROM e.g.

D:\Win98 and click OK.)

f. Click Finish to complete the driver installation. See Fig 5.

Figure 5 : Installation Completed

Easy Start

Easy Start Page 10 of 16

3.2 Installing your Modem Driver for Windows 2000

g. If your modem is connected as illustrated in Chapter 2 you will be prompted for the

modem driver.

h. Place the

Installation CD into your CD-ROM Drive and click Next. See Fig 6.

Figure 6 : Prompted for Driver

i. Click Search for a suitable driver for my device. (recommended) and click Next. See

Fig 7.

Figure 7 : Search for New Drivers

Andere Handbücher für 56K External Modem

Inhaltsverzeichnis

Andere Aztech Modem Handbücher

Aztech

Aztech ADSL PCI Modem Produktinformationsblatt

Aztech

Aztech 206U Bedienungsanleitung

Aztech

Aztech DSL500U Produktinformationsblatt

Aztech

Aztech MDP3880-U Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech HW550-3G Gebrauchsanweisung

Aztech

Aztech DSL605E Bedienungsanleitung

Aztech

Aztech 305E Bedienungsanleitung

Aztech

Aztech MDP3880SP-U Bedienungsanleitung

Aztech

Aztech MDP3880 Bedienungsanleitung

Aztech

Aztech DSL905E Series Bedienungsanleitung

Aztech

Aztech UM9800-U Bedienungsanleitung

Aztech

Aztech DSL1015EN L Bedienungsanleitung

Aztech

Aztech DSL 300P Produktinformationsblatt

Aztech

Aztech DSL700P Bedienungsanleitung

Aztech

Aztech DSL500U Gebrauchsanweisung

Aztech

Aztech MR2800-W Bedienungsanleitung

Aztech

Aztech FG7003GRV(AC) Bedienungsanleitung

Aztech

Aztech DSL705EU Bedienungsanleitung

Aztech

Aztech 56K PCI Modem Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech DSL305E Gebrauchsanweisung

Aztech

Aztech HL110EW Gebrauchsanweisung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung