Aztech MDP7800 Bedienungsanleitung

MDP7800 PCI MODEM

Users Manual

Version 1.0

MDP7800 PCI Modem Users Manual

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

©Copyright

The software described in this manual is protected by international copyright laws. Under this copyright law, you are

prohibited from duplicating the software for any purpose other than making archival copies for the sole purpose of

backing-up against loss.

In addition, no part of this manual may be reproduced or transmitted, in any form or by any means, electronic or

mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other

than the purchasers personal use, without the prior written permission of Aztech Systems Ltd.

 Intel and Pentium are registered trademarks of Intel Corp.

 MMX is a trademark of Intel Corp.

 Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corp.

 All other company or product names are trademarks or registered trademarks or service marks of their respective

owners and are hereby recognized as such.

Disclaimer Statement

Aztech Systems Ltd specifically disclaims all warranties, either expressed or implied, including but not limited to

implied warranties of merchantability and fitness for a particular purpose, with respect to the hardware, software, and

the accompanying written materials. Aztech Systems Ltd reserves the right to revise or make improvements to its

product at any time and without obligation to notify any person of such revisions or improvements.

In no event shall Aztech Systems Ltd be liable for any consequential or incidental damages, including any loss of

business profits or any other commercial damages, arising out of the use of its product.

Printed in Singapore

P/N : 040-502376-101

MDP7800 PCI Modem Users Manual

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Part 15 FCC Compliance Statement

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Operating Environment

For Home or Office Use

Notice

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation, if

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Caution

To comply with the limits for the Class B digital device according to Part 15 of FCC Rules, this device must be

installed in computer equipment certified to comply with the Class B limits. All cables used to connect the

computers and peripherals must be shielded and grounded. Operation with non-certified/shielded cables may

result in radio/TV interference.

Modification

Any modification not expressly approved by the manufacturer of this device could void the users authority to

operate the device.

Party Responsible for Product Compliance:

Aztech Labs, Inc.

45645 Northport Loop East

Fremont, CA 94538, U.S.A.

MDP7800 PCI Modem Users Manual

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Part 68 FCC Compliance Statement

(FCC ID : 4JSNG-25441-M5-E)

This equipment complies with Part 68 of the FCC Rules. On the equipment is a label that contains, among other

information, the FCC registration number and ringer equivalence number (REN) for this equipment. If

requested; this information must be provided to your telephone company.

Connection to the telephone network should be made by using standard modular telephone jack type RJ11.

The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all

of those devices ring when your telephone number is called. In most, but not all areas, the sum of the RENs of

all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may

connect to your line, as determined by the REN, you should contact your local telephone company to determine

the maximum REN for your calling area.

If your telephone equipment causes harm to the telephone network, the telephone company may discontinue

your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you

will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations or procedures that could

affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an

opportunity to maintain uninterrupted telephone service.

In the event this equipment should fail to operate properly, disconnect the unit from the telephone line. Try

using another FCC approved telephone in the same telephone jack. If the trouble persists, call the telephone

company repair service bureau. If the trouble does not persist and appears to be with this unit, disconnect the

unit from the telephone line and discontinue use of the unit until it is repaired. Please note that the telephone

company may ask that you disconnect this equipment from the telephone network until the problem has been

corrected or until you're sure that the equipment is not malfunctioning.

This equipment may not be used on coin service provided by the telephone company. Connection to party lines

is subject to state tariffs.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other

electronic device to send any message via a telephone fax machine unless such message clearly contains in a

margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time

it is sent and an identification of the business or other entity, or individual sending message and the telephone

number of the sending machine or such business, or entity, or individual.

This user information can be programmed in the communication software you are using with your equipment.

Repair or Service Information

In the event of the need for service or repair, carefully package the unit along with a note of the problem and

send it to the address below or the authorized service center nearest you. Be sure to include your address (not a

P.O Box), telephone number and best time to call.

Attn: Aztech Labs, Inc.

45645 Northport Loop East

Fremont, CA 94538, U.S.A.

MDP7800 PCI Modem Users Manual

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Canadian Department of Communications Notice

The Canadian Department of Communications (DOC) label identifies certified equipment. This certification

means that the equipment meets certain telecommunications network protective, operational and safety

requirements. The department does not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, make sure you are permitted to connect it to the facilities of the local

telecommunications company. You must install the equipment using a acceptable method of connection. In

some cases you may also extend the company's inside wiring for single line individual service by means of

certified connector assembly (telephone extension cord). You should be aware, however, that compliance with

the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designed by the

supplier. Any repairs or alterations made by a user to this equipment, or equipment malfunctions, may give the

telephone communications company cause to request the user to disconnect the equipment.

For your own protection, make sure that the electrical ground connections of the power utility, telephone lines

and internal metallic water pipe systems, if present, are connected together. This precaution may be particularly

important in rural areas.

Caution: Do not attempt to make electrical ground connections yourself; contact the appropriate

electric inspection authority or an electrician.

The load number (LN) assigned to each terminal device denotes the percentage of the total load to be connected

to the telephone loop used by the device, to prevent overloading. The termination on a loop may consist of any

combination of devices, subject to the requirement that the total of the load numbers of all the devices does not

exceed 100.

Repair or Service Information

In the event of the need for service or repair, carefully package the unit along with a note of the problem and

send it to the address below or the authorized service center nearest you . Be sure to include your address (not a

P.O Box), telephone number and best time to call.

Attn: Morrice Associate

816 Norwick Road, Newmarket

Ontario, L3X 1K8, Canada

MDP7800 PCI Modem Users Manual

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

This page has been intentionally left blank.

MDP7800 PCI Modem Users Manual

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Table Of Contents

Setting up Your Modem ........................................................

1.1 Minimum System Requirements ............................................

1.2 Safety Precaution .....................................................................

1.3 Installation Notes .....................................................................

1.4 Installing the Modem ..............................................................

1.5 Connecting the Modem ..........................................................

Installing the Modem Drivers in Windows®95/98

& Windows NT®4.0 .................................................................

Testing the Modem in Windows®95/98

& Windows NT®4.0 .................................................................

Frequently Asked Questions .................................................

Technical Specifications .......................................................

Modem Card Layout ..............................................................

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

MDP7800 PCI Modem Users Manual

This page has been intentionally left blank.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Chapter 1  Setting up Your Modem

Setting up Your Modem

Thank you for buying the MDP7800 PCI Modem.

With the MDP7800 PCI Modem alone, you can perform a comprehensive range of

modem-related functions including data communications, sending and receiving of

faxes.

The intensive demands of todays Internet applications will no longer be a bottleneck.

Using the MDP7800 PCI Modem, you can now download graphic intensive web

pages, high bandwidth audio and video files and large file size software programs at

speeds of up to 56Kbps.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

MDP7800 PCI Modem Users Manual

1.1 Minimum System Requirements

•PC-based computer with Pentium®100 processor.

•PCI Bus slot.

•16MB RAM.

•10MB hard disk space (system files and modem drivers only).

•CD-ROM drive.

•Windows®95/98 / Windows NT®4.0

1.2 Safety Precaution

•Do not remove your modem from its protective bag until you are

ready to install it.

•Always try to hold your modem by its edges. Avoid touching any

electronic components on your modem.

•Static electricity can cause permanent damage to your modem. To

prevent such a damage, you must ground yourself while installing the

modem. You can do this in either of the two ways :

»Use a grounding strap, which is a coiled wire with a clip at one

end and an elastic strap at the other. Wear the strap around your

wrist and attach the clip to any non-painted metal surface of the

computers chassis.

»If you do not have a grounding strap, touch any non-painted

surface of the computer's chassis before you begin installation,

and again every minute or so until the installation is completed.

Andere Aztech Modem Handbücher

Aztech

Aztech ADSL USB Modem Gebrauchsanweisung

Aztech

Aztech HomePlug AV Wireless N Extender Bedienungsanleitung

Aztech

Aztech HW550-3G Gebrauchsanweisung

Aztech

Aztech UM3100 Bedienungsanleitung

Aztech

Aztech 56K External Modem Gebrauchsanweisung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech DSL500U Produktinformationsblatt

Aztech

Aztech MDP3880SP-U Bedienungsanleitung

Aztech

Aztech DSL5018EN Bedienungsanleitung

Aztech

Aztech HL110EW Gebrauchsanweisung

Aztech

Aztech MDP3858W Series Bedienungsanleitung

Aztech

Aztech MDP3880 Bedienungsanleitung

Aztech

Aztech DSL 1015EN L Leitfaden

Aztech

Aztech MR2800-W Bedienungsanleitung

Aztech

Aztech DSL Turbo 900 Package Bedienungsanleitung

Aztech

Aztech MSP3880W Series Bedienungsanleitung

Aztech

Aztech DSL605E Gebrauchsanweisung

Aztech

Aztech FG7003GRV(AC) Bedienungsanleitung

Aztech

Aztech DSL905E Series Bedienungsanleitung

Aztech

Aztech ADSL USB Modem Produktinformationsblatt

Aztech

Aztech DSL600E Bedienungsanleitung

Aztech

Aztech DSL705EU Handbuch

Aztech

Aztech DSL305E Gebrauchsanweisung

Aztech

Aztech MR2800-W Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung