Aztech Na8300 Produktinformationsblatt

Cable/DSL Wireless Broadband

4-Port Router

Easy Start

Version 0.1

Contents

Introduction ....................................................... 3

Minimum System Requirements ...........................3

CABLE/DSL Router Package ................................. 4

CABLE/DSL Router Overview ............................... 4

Typical CABLE/DSL Router Connection .................. 6

Step 1: Connecting the CABLE/DSL Router to Your

Computer/Notebook ............................................7

Step 2: Configuring Your Ethernet Network Card ... 8

Step 3: Configuring Your Internet Browser ............12

Step 4: Accessing to the Router .......................... 13

• Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.

Part 15 FCC Compliance Statement

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Operating Environment

For Home or Office Use

Notice

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation, if this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution

To comply with the limits for the Class B digital device according to Part 15 of FCC Rules, this device must be installed

in computer equipment certified to comply with the Class B limits. All cables used to connect the computers and

peripherals must be shielded and grounded. Operation with non-certified/shielded cables may result in radio/TV

interference.

Modification

Any modification not expressly approved by the manufacturer of this device could void the user’s authority to operate

the device.

Party Responsible for Product Compliance:

Aztech Labs, Inc.

45645 Northport Loop East

Fremont, CA 94538, U.S.A.

Easy StartEasy Start

Easy Start

lCABLE/DSL

Wireless Router

n



Power adapter (DC 9V) oCAT-5 UTP Straight

Ethernet Network cable (RJ-45)

(Qty:2)

mEasy Start

CABLE/DSL Wireless Router Package

For any missing items, please contact your dealer immediately.

Introduction

Thank you on your purchase of the Wireless Broadband 4-Port Router! The Wireless 4-

Port Router allows you to share high-speed broadband connection with multiple PC using

a single device wired or wireless.

The Wireless Broadband 4-Port Router can be connected to any computer/notebook with

a 10/100 Base-T Ethernet card for wired connection or a IEEE 802.11g Wireless adapter.

The Ethernet port have Auto MDI/MDIX feature which allows both cross or straight UTP

cable to be utilized. The Wireless 4-port Ethernet Router has an in-built IEEE802.11g

Wireless LAN Access Point for wireless connectivity.

This documentation assumes that you have already installed an Ethernet card or wireless

adapter on your computer/notebook.

Minimum System Requirements

• Pentium®MMX 233MHz

• Ethernet card installed with TCP/IP Protocol (Required only if you are connecting to

the ETHERNET port of your Router)

• IEEE 802.11g Wireless adapter (Required if you are connecting to the Wireless Access

Point of the router)

• OS independent for Ethernet

• Web Browser support:

Microsoft Internet Explorer 4.0 (or later versions)

Netscape® Navigator 3.02 (or later versions)

Easy StartEasy Start

Easy Start

CABLE/DSL Wireless Router Overview

lPOWER

Lights up when power is supplied to the CABLE/DSL Wireless Router.

mWLAN

Lights up when the Wireless LAN connection is established.

nPPP

Lights up when the PPP connection is established.

oWAN

Lights up when the WAN connection is established.

p LAN LINK/ACT

Lights up when the Ethernet cable is properly connected from your CABLE/DSL Wireless

Router to the Ethernet Card.

Flickers when the LAN is transmitting/receiving data.

Front Indicators

p

Easy StartEasy Start

Easy Start

2To activate the reset function:

- Ensure that your CABLE/DSL Router is powered on.

- Use a paper clip or a pencil tip to depress the reset button and release. At this point, the

WAN indicator light will go off, followed by the ETHERNET indicators. The reset is in

progress.

- When the WAN indicator light up or blinking, it means that the reset process is completed.

The default settings are now restored.

lPOWER SWITCH

To power on or off the modem.

I - indicates ON position

O - indicates OFF position.

mDC IN

To connect to the Power Adapter that comes with your package.

nRESET

To reset your CABLE/DSL Wireless Router to factory default settings.(All customised

settings that you have saved will be lost!)Please refer to the below footer2on how to

activate the reset function.

oETHERNET

10/100 Base-T Ethernet jack (RJ-45) to connect to your Ethernet Network card or

Ethernet Hub / Switch

p Modem

To connect to the CABLE/DSL modem.

q RF Antenna

18002.4Ghz Wireless Antenna.

Back Indicators

lmn

op

Easy StartEasy Start

Easy Start

Typical CABLE/DSL Wireless Router Connections

Up to 4 PCs Connections

For More than 4 PCs Connections

To connect to more than 4 computers/notebooks, you may further expand one of the Ethernet

Ports via an Ethernet Hub/Switch. For details on how to connect to the Ethernet Switch/

Hub, please refer to the documentation that comes with the unit.

With the Auto MDI/MDIX feature, both cross and straight UTP cable can be

utilized.

With the Auto MDI/MDIX feature, both cross and straight UTP cable can be

utilized.

Computers or

Notebooks with

Ethernet Network

Cards

Cable/DSL

modem

Cable/DSL

Wireless

Router

Computers or

Notebooks with

Wireless PC Cards

or USB Client

Cable/DSL

modem

Cable/DSL

Wireless

Router

Computers or

Notebooks with

Wireless PC

Cards or USB

Client

Computers or

Notebooks with

Ethernet Network

Cards, Ethernet

Switches or Hubs

Easy StartEasy Start

Easy Start

1.1 Connecting to the Ethernet

Connect your computer(s)/notebook(s) to the CABLE/DSL Wireless Router as illustrated. The

following illustration shows the connection of a single computer.

Back view of a computer

Ethernet Network cable

Ethernet Port

Back view of

the Wireless

CABLE/DSL

Router

Ethernet

Network Card

(All the Ethernet Ports on the

CABLE/DSL Router are Auto

MDI/MDIX. Both Straight and

Cross Ethernet Network cables

can be used).

Step 1: Connecting the CABLE/DSL Wireless

Router to Your Computer/Notebook

Power off your Computer/Notebook or/and any connected devices

before connecting to the ADSL Router!

NOT SURE HOW THE ETHERNET PORT LOOKS LIKE?

The following are some tips to help you locate your Ethernet Ports on your

Computer/Notebook. Alternatively, you may refer to the documentation that

comes with your Computer/Notebook.

Locating the Ethernet Port on your Computer/Notebook

Most Computers/Notebooks have labels describing the Ports. For Ethernet Port,

you will see either ETHERNET,ETH or RJ45 labelled near the Port.

If your Computer/Notebook does not have such descriptions, try the following.

-Picture A gives the illustration of an Ethernet Port. All Ethernet Ports have 8

conductors on it. Do not mistaken with the LINE Port (Picture B) that has only 6

conductors.

- The Ethernet Port is slightly bigger than the LINE Port.

A. ETHERNET : B. LINE:

Easy StartEasy Start

Easy Start

1.2 Connecting to the Modem

Connect your Modem to the Cable/DSL 4 Port Router as illustrated.

1.3 Checking Your Connections

Please check your connections before proceeding.

Back view of the

CABLE/DSL Wireless

Router

Back view of the

Modem

Ethernet Network cable

To your Power Outlet

Back view of the

CABLE/DSL

Wireless Router

To your Modem

To the Ethernet Port on your

Computer(s)/Notebook(s)

Easy StartEasy Start

Easy Start

1.5 Powering On

-Power on the Power Outlet that is connected to your CABLE/DSL Wireless Router.

-Power on your Computer(s)/Notebook(s).

Please proceed to Step 2.

1.4 Connecting to the Power Outlet

Back view of the

CABLE/DSL

Wireless Router

Connect the other end of the Power

Adapter to the Power Outlet.

Easy StartEasy Start

Easy Start

iii Click the IP Address tab.

Click the option Obtain an IP address

automatically and click OK to save the

settings.

iFrom your Windows desktop, right-click on the Network Neighborhood icon. Select

Properties.

iiii From the Configuration tab, select TCP/IP-> xxx where xxx refers to the model of your

Ethernet Card that is connected to your CABLE/DSL Wireless Router.

Click Properties.

(This screen shot uses 3Com EtherLink

Ethernet card model as an example).

Step 2: Configuring Your Ethernet Network Card

2.1 Configuring Your Ethernet Network Card

2.2 For Windows®98 Second Edition / Windows®Me

Ensure that your CABLE/DSL Wireless Router is powered on. Restart your

system.

Proceed to Step 3.

The following illustrated screen shots serve only as examples. For

any dissimilarities, please follow closely the instructions prompted on

your Computer.

Inhaltsverzeichnis

Andere Aztech Netzwerk-Router Handbücher

Aztech

Aztech ADSL2+ Ethernet Router Bedienungsanleitung

Aztech

Aztech 700WR-3G Benutzerhandbuch

Aztech

Aztech DSL1000EW(L) Bedienungsanleitung

Aztech

Aztech WMB260AC Bedienungsanleitung

Aztech

Aztech WMB260AC Bedienungsanleitung

Aztech

Aztech Easy Start Bedienungsanleitung

Aztech

Aztech DSL605EW Gebrauchsanweisung

Aztech

Aztech Ethernet USB Combo Router Bedienungsanleitung

Aztech

Aztech MWR638 Bedienungsanleitung

Aztech

Aztech HW550-3G Bedienungsanleitung

Aztech

Aztech 4-Port Wireless G Router Bedienungsanleitung

Aztech

Aztech DSL9100R Bedienungsanleitung

Aztech

Aztech HW831 Bedienungsanleitung

Aztech

Aztech WL830RT4 Gebrauchsanweisung

Aztech

Aztech SDSL Bridge & Router Bedienungsanleitung

Aztech

Aztech DSL TurboRouter 258E Bedienungsanleitung

Aztech

Aztech ADSL 4 Port Ethernet Router Produktinformationsblatt

Aztech

Aztech DSL5005EN Gebrauchsanweisung

Aztech

Aztech HW550-3G Merkblatt

Aztech

Aztech DSL1000EW L Leitfaden

Aztech

Aztech DSL5008ENX Bedienungsanleitung

Aztech

Aztech HW550-RT4 Bedienungsanleitung

Aztech

Aztech DSL600EWR Produktinformationsblatt

Aztech

Aztech DSL8800GR Gebrauchsanweisung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Aztech na8300 Produktinformationsblatt

Beliebte Netzwerk-Router Handbücher anderer Marken