B-Link XT2 Bedienungsanleitung
Start
Here
Blink XT2 Setup Guide
Blink User Guide Tuscon Camera-US version En 3_7_19.indd 1 3/7/19 4:35 PM
If you’re adding a new system, go to Step 1 on page 3 for
instructions on how to add your system.
If you’re adding a camera to an existing system, go to
step 3 on page 4 for instructions on how to add your
camera(s).
Before you begin, please make sure you have the
following minimum requirements:
Smartphone or tablet running iOS 10.3 or later,
or Android 5.0 or later
Home WiFi Network (2.4GHz only)
Internet access with upload speed of at least
2 Mbps
•
•
•
How to get started:
•
•
•
Thank you for purchasing the
Blink XT2!
You can install the Blink XT2 in three easy steps:
To install your camera or system, you can:
Download the Blink Home Monitor App
Connect your sync module
Add your camera(s)
Follow the in-app instructions as directed.
Follow the steps listed in this guide.
Visit support.blinkforhome.com for our in-depth setup
guide and troubleshooting information.
1.
2.
3.
a)
b)
c)
Page |1 Page |2
Blink User Guide Tuscon Camera-US version En 3_7_19.indd 1-2 3/7/19 4:35 PM
In your app, select “Add a Blink Device” and choose
your camera.
Remove the camera back cover by sliding the latch in
the center of the back downward and simultaneously
pull o back cover.
Insert included 2 AA 1.5V non-rechargeable lithium
metal batteries.
Follow the in-app instructions to complete setup.
Step 3: Add Your Camera(s)
a)
b)
c)
d)
AA 1.5V lithium batteries
Download and launch the Blink Home Monitor App
on your phone or tablet through the Apple App Store,
Google Play Store, or Amazon App Store.
Create a new Blink account.
In your app, select “Add a System”.
Follow the in-app instructions to complete
sync module setup.
Step 1: Download the Blink Home Monitor App
Step 2: Connect Your Sync Module
a)
b)
a)
b)
Page |3 Page |4
Blink User Guide Tuscon Camera-US version En 3_7_19.indd 3-4 3/7/19 4:35 PM
Lithium Battery Safety Information
Important Safeguards:
The Lithium batteries accompanying this device cannot
be recharged. Do not open, disassemble, bend, deform,
puncture, or shred the battery. Do not modify, attempt to
insert foreign objects into the battery or immerse or expose
to water or other liquids. Do not expose the battery to
re, explosion or other hazard. Promptly dispose of used
batteries in accordance with applicable laws and regulations.
If dropped and you suspect damage, take steps to prevent
any ingestion or direct contact of uids and any other
materials from the battery with skin or clothes.
If a battery leaks, remove all batteries and recycle or
dispose of them in accordance with battery manufacturer’s
recommendations. If uid from the battery comes into
contact with skin or clothes, ush with water immediately.
Insert the batteries in the proper direction as indicated
by positive (+) and negative (-) markings in battery
compartment. It is highly recommended to use Lithium
Or need help with your Blink XT2 or other Blink products,
please visit support.blinkforhome.com for systems
instructions and videos, troubleshooting information, and a
link to contact us directly for support.
You can also visit our Blink Community at
www.community.blinkforhome.com to interact with other
Blink users and share your video clips.
If you are experiencing trouble:
Important Product Information:
WARNING: FAILURE TO READ AND FOLLOW THESE
SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC
SHOCK, OR OTHER INJURY OR DAMAGE
Safety and Compliance Information Use Responsibly.
Read all instructions and safety information before use.
Page |5 Page |6
Blink User Guide Tuscon Camera-US version En 3_7_19.indd 5-6 3/7/19 4:35 PM
risk of re or electric shock when using the AC adapter,
carefully follow these instructions:
Do not force the power adapter into a power outlet.
Do not expose power adapter or its cable to liquids.
If the power adapter or cable appears damaged,
discontinue use immediately.
Power adapter designed only for use with Blink
devices.
Closely supervise children when the device is used by or
near children.
Only use accessories that are recommended by the
manufacturer. Use of third-party accessories may lead to
damage of your device or accessory and may cause re,
electric shock, or injury.
To avoid risk of electric shock, do not touch your Sync
Module or any wires connected to it during a lighting
storm.
Sync module for indoor use only.
4.
5.
6.
7.
batteries with this product. Do not mix used and new
batteries or batteries of dierent types (for example,
Lithium and alkaline batteries). Always remove old, weak, or
worn-out batteries promptly and recycle or dispose of them
in accordance with Local and national disposal regulations.
Other Safety and Maintenance Considerations
1.
2.
3.
Your Blink XT2 can withstand outdoor use and contact
with water under certain conditions. However, Blink XT2
is not intended for underwater use and may experience
temporary eects from exposure to water. Do not
intentionally immerse your Blink XT2 in water or expose
it to liquids. Do not spill any food, oil, lotion, or other
abrasive substances on your Blink XT2. Do not expose
your Blink XT2 to pressurized water, high velocity water,
or extremely humid conditions (such as a steam room).
To protect against electric shock, do not place cord, plug,
or device in water or other liquids.
Your Sync Module is shipped with an AC adapter. Your
Sync Module should only be used with the AC power
adapter and USB cable included in box. To reduce the
Page |7 Page |8
Blink User Guide Tuscon Camera-US version En 3_7_19.indd 7-8 3/7/19 4:35 PM
Product Specications Blink XT2
Model Number: BCM00200U
Electrical Rating: 2 1.5V AA Single Use Lithium Metal batteries and
optional USB 5V 1A external power supply
Operating Temperature: -4 to 113 degrees F
Product Specications Sync Module
Model Number: BSM00203U
Electrical Rating: 100-240V 50/60 HZ 0.2A
Operating Temperature: 32 to 95 degrees F
Other Information
For additional safety, compliance, recycling, and other important
information regarding your device, please refer to the Legal and
Compliance section of the Settings menu on your device.
Product Disposal Information
Dispose of the product in accordance with Local and National Disposal
Regulations. Changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
FCC Compliance Statement (USA)
This Device (including related accessories like the adapter) complies
with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) such Device may not cause harmful interference,
and (2) such Device must accept any interference received, including
interference that may cause undesired operation.
The party responsible for FCC compliance is
Amazon.com Services, Inc.
410 Terry Ave North, Seattle, WA98109 USA
If you wish to contact Blink please go to this link
www.blinkforhome.com/pages/contact-us
Device Name: Blink XT2 Model: BCM00200U
Page | 9 Page |10
Blink User Guide Tuscon Camera-US version En 3_7_19.indd 9-10 3/7/19 4:35 PM
Blink Terms & Policies
BEFORE USING THE BLINK DEVICE, PLEASE READ THE TERMS
FOUND AT HTTPS://BLINKFORHOME.COM/PAGES/BLINK-TERMS-
WARRANTIES-AND-NOTICES AND ALL RULES AND POLICIES FOR THE
DEVICE AND SERVICES RELATED TO THE DEVICE (INCLUDING, BUT
NOT LIMITED TO, THE APPLICABLE BLINK PRIVACY NOTICE AND ANY
APPLICABLE RULES OR USAGE PROVISIONS ACCESSIBLE THROUGH THE
HTTPS://BLINKFORHOME.COM/PAGES/BLINK-TERMS-WARRANTIES-
AND-NOTICES WEBSITE OR THE BLINK APP (COLLECTIVELY, THE
“AGREEMENTS”). BY USING THE BLINK DEVICE, YOU AGREE TO BE
BOUND BY THE TERMS OF THE AGREEMENTS.
Your Blink device is covered by a one year Limited Warranty. Details are
available at https://blinkforhome.com/pages/blink-terms-warranties-
and-notices.
Page |11
Blink User Guide Tuscon Camera-US version En 3_7_19.indd 11 3/7/19 4:35 PM
Andere Handbücher für XT2
2
Inhaltsverzeichnis
Andere B-Link Sicherheitskamera Handbücher
