Baby Lock Ellisimo BLSO-U Technisches Handbuch

English

111-001

Pantone 117C KIT IInstruction and Reference Guide_tacony_ H1-4

To register your machine warranty and receive Baby Lock product updates and oers, go to

www.babylock.com/prole.

If you have questions with registration, visit your Authorized Baby Lock Retailer.

ENGLISH

Before using this upgrade kit, be sure to read this Instruction and Reference Guide for information on its

correct use.

CONTENTS

BEFORE YOU START................................................................................................................. 2

NEW FEATURES ........................................................................................................................ 2

Chapter 1 How to Create Bobbin Work.................................................................................... 3

ABOUT BOBBIN WORK ........................................................................................................... 4

PREPARING FOR BOBBIN WORK ............................................................................................ 5

Required Materials ................................................................................................................ 5

Upper Threading ................................................................................................................... 6

Preparing the Bobbin Thread................................................................................................. 6

CREATING BOBBIN WORK (SEWING) ................................................................................... 10

Positioning the Fabric and Sewing....................................................................................... 10

Bobbin Work Free Motion Sewing....................................................................................... 12

CREATING BOBBIN WORK (EMBROIDERY)........................................................................... 13

Selecting the Pattern............................................................................................................ 13

Start Embroidering............................................................................................................... 14

ADJUSTING THE THREAD TENSION...................................................................................... 17

TROUBLESHOOTING............................................................................................................. 18

Chapter 2 New Features and New Patterns ............................................................................ 19

HOW TO USE NEW FEATURES .............................................................................................. 20

Displaying the Fabric While Aligning the Embroidery Position ............................................ 20

CHANGING THE PATTERN SIZE WHILE MAINTAINING THE DESIRED THREAD DENSITY

(STITCH RECALCULATOR)...................................................................................................... 23

NEW PATTERNS...................................................................................................................... 25

Thumbnail List .................................................................................................................... 25

Embroidery Patterns Color Change Table ............................................................................ 26

BEFORE YOU START

It is important to perform the upgrade according to the procedure outlined in the Installation Guide. The

machine can then be used as outlined in this upgrade Instruction and Reference Guide. Additional new

machine features and instructions are located in the New Features of Version 2 guide.

NEW FEATURES

The following features will be activated with the upgrade for Kit I.

• The bobbin case (gray) and bobbin cover (for bobbin work) are included, allowing you to embroider the

added bobbin work embroidery patterns or sew using decorative thread or ribbon too thick to flow freely

through the needle. (page 5)

• Positioning of the embroidery pattern can be aligned while displaying the fabric being used in the LCD

screen. Embroidery can easily be positioned. (page 20)

• Embroidery patterns can be enlarged or reduced while maintaining their thread density. (page 23)

• Embroidering patterns for bobbin work have been added so bobbin work can immediately be sewn. (page 25)

• One cursive font of character patterns has been added to increase your embroidering enjoyment. (page 25)

Chapter 1

How to Create Bobbin Work

ABOUT BOBBIN WORK

Beautiful embroidery work, with a three-dimensional appearance, can be created by winding the bobbin with heavy

weight thread or ribbon, which is too thick to be threaded through the machine’s needle. The decorative thread or

ribbon will stitch out on the underneath side of fabric while sewing with the fabric wrong side facing up.

Bobbin work is sewn using the special bobbin case (gray) and bobbin cover with tabs included with Kit I.

Bobbin work embroidery is sewn using the bobbin work patterns included with this product in addition to

some of the utility stitches.

1. Utility stitches 2. Decorative stitches 3. Free motion sewing

ENGLISH

PREPARING FOR BOBBIN WORK

Required Materials

■Bobbin case and bobbin cover

aBobbin case (gray)

There is a notch at the location indicated by the letter

“A”.

bBobbin cover with tabs (for bobbin work)

There are two small v-shaped tabs on the back of the

bobbin cover as indicated by the letter “B”.

The tabs help hold the bobbin in place so it does not lift

up while thick thread is being pulled through.

This bobbin cover can also be used with normal

sewing.

■Lower thread

We recommend the following types of threads for

bobbin work.

* When wide ribbon or heavy weight threads are being used, we

recommend test sewing with and without bobbin case tension

being applied to see which gives the best stitching results.

If wide ribbon such as 3.5mm (approx. 1/8 inch) is to be used,

we recommend that bobbin case tension not be applied. Refer

to page 8 for more detailed instructions.

■Upper thread

Upper thread choices can vary depending on the

finished look you would like to achieve. By using

sewing machine embroidery thread (polyester),

multipurpose polyester thread, or monofilament

(transparent nylon) thread the appearance of a single

design can be changed many times just by choosing a

different upper thread weight and/or color.

If you do not wish for the upper thread to be visible, we

recommend using transparent nylon monofilament

thread or polyester light weight thread (50wt. or above)

that is the same color as the lower thread.

■Needle

Use a needle appropriate for the upper thread and

fabric being used. Refer to “Fabric/Thread/Needle

Combinations” (in the chapter “CHANGING THE

NEEDLE”) and “Embroidery Step by Step” in the

machine’s Instruction and Reference Guide.

■Presser foot

Utility stitches or decorative stitches: Monogramming

foot “N”

Free motion sewing: Free motion quilting foot “C”, Free

motion open toe quilting foot “O” or Free motion echo

quilting foot “E”

Embroidery: Embroidery foot “W”

■Fabric

Be sure to sew trial stitches on a piece of scrap fabric,

which includes the same threads and fabric as what is

being used in your project.

No.5 or finer hand embroidery

thread or decorative thread

Flexible woven ribbon

(When embroidering: approx. 2mm

(approx. 5/64 inch) recommended)

Fine embroidery ribbon (silk or

silk-like material) (3.5 mm (approx.

1/8 inch) or less, recommended)

Note

• Do not use thread heavier than No.5 hand

embroidery thread.

• Some threads may not be appropriate for bobbin

work. Be sure to sew trial stitches before sewing on

your project.

Note

• The sewing results may be affected by the type of

fabric used. Before sewing your project, be sure to

sew trial stitches on a piece of scrap fabric that is

the same as the fabric used in the project.

Upper Threading

aInstall a needle appropriate for the upper

thread and fabric to be used.

For details on installing the needle, refer to

“CHANGING THE NEEDLE” in the machine’s

Instruction and Reference Guide.

bAttach the presser foot.

For details on attaching the presser foot, refer to

the following topics in the machine’s Instruction

and Reference Guide.

→CHANGING THE PRESSER FOOT

→Using Free motion Quilting Foot “C”

→Using free motion Open Toe Quilting Foot “O”

→Echo Quilting Using the Free Motion Echo Quilting

Foot “E”

→Attaching Embroidery Foot “W”

cThread the machine with the upper thread.

For details on threading the machine, refer to

“Upper Threading” in the machine’s Instruction

and Reference Guide.

Preparing the Bobbin Thread

In order to create bobbin work, the bobbin case must

be replaced with the one for bobbin work.

Before creating bobbin work, clean the bobbin case

and the race.

aRaise the needle and presser foot, and then

turn off the machine.

bRemove the flat bed attachment or

embroidery unit.

cGrasp both sides of the needle plate cover,

and then slide it toward you to remove it.

aNeedle plate cover

dRemove the bobbin case.

aBobbin case

eUse the cleaning brush included with the

machine or a vacuum cleaner to remove any

lint and dust from the race and its

surrounding area.

aCleaning brush

bRace

fWipe the bobbin case (gray) with a soft lint

free cloth to clean it.

gInsert the bobbin case so that the projection

on the bobbin case aligns with the spring.

aProjection

bSpring

ENGLISH

hInstall the needle plate cover.

For details on installing the needle plate cover,

refer to “Cleaning the Race” in the machine’s

Instruction and Reference Guide.

aNeedle plate cover

iInstall the flat bed attachment or embroidery

unit.

jInsert the thread tail from the spool of thread

through the hole in the bobbin from the inside

to the outside. Hold the thread tail while

winding the thread around the bobbin by

hand. After winding the bobbin so it is filled

as shown below (about 80%), cut the thread.

For precautions on winding the bobbin for

embroidering, refer to step bof “Selecting the

Pattern” on page 13.

kUsing scissors carefully trim the thread tail as

close to the bobbin as possible.

aBeginning of wound thread

lInstall the bobbin wound with thread.

Whether or not tension should be applied to the

bobbin thread depends on the type of thread

being used.

Note

• The bobbin case (gray) cannot be used for sewing in

any way other than bobbin work. After sewing

bobbin work, refer back to the steps in “Preparing

the Bobbin Thread” on page 6 for removing and

cleaning the bobbin case (gray), and then reinstall

the standard bobbin case (black).

CAUTION

• Be sure to use the bobbin case (gray) when creating

bobbin work. Using any other bobbin case may

result in the thread becoming tangled or damage to

the machine.

• Make sure that the bobbin case is correctly

installed. If the bobbin case is incorrectly installed,

the thread may become tangled or the machine may

be damaged.

CAUTION

• When creating bobbin work, use the bobbin cover

with tabs (for bobbin work), otherwise the thread

may become tangled or the needle may break.

CAUTION

• Be sure to use the machine’s included bobbin or one

designed specifically for this machine (Class 15).

Using any other bobbin may result in damage or

injuries.

Actual size

This model Other models

Note

• Slowly and evenly wind the thread around the

bobbin.

• For best results, wind the bobbin so the thread is

snug and not twisted.

CAUTION

• If thread extends beyond the top of the bobbin too

much, the thread may become tangled or the

needle may break.

Memo

If inserting thread tail through bobbin hole is difficult

bobbin can be wound by holding tail and wrapping

thread around inside base. Then carefully trim thread

tail so it does not extend from the side of the bobbin.

11.5 mm

(approx.

7/16 inch)

■When tension is applied to the bobbin

thread

Insert bobbin into bobbin case so the thread unwinds

from the left side. Pass the thread carefully through

groove of needle plate cover as shown below.

aGroove of needle plate cover

■When tension is not applied to the bobbin

thread

If the bobbin thread in the trial stitching is too tight and

adjusting the bobbin case tension does not help, do not

pass the thread through the tension spring.

Hold the bobbin with your left hand so the thread

unwinds from the right side and hold the end of the

thread with your right hand.

mPull out about 8 cm (approx. 3 inches) of

bobbin thread.

nLightly hold the end of the upper thread while

turning the handwheel toward you

(counterclockwise) until the mark on the

handwheel aligns with the center top of

machine.

CAUTION

• When winding the bobbin, make sure the thread is

not frayed. Sewing with frayed thread may result in

the thread catching on the tension spring of the

bobbin case, the thread completely becoming

tangled or damage to the machine.

• Do not guide the bobbin thread completely through

the groove in the needle plate cover, otherwise the

lower threading cannot be done correctly. Thread

only as far as shown below.

ENGLISH

oGently pull the upper thread to bring the

bobbin thread up through the needle plate.

→A loop of the bobbin thread comes out through the

hole in the needle plate.

pInsert tweezers through bobbin thread loop

and pull bobbin thread above the needle

plate.

qAlign the upper thread and bobbin thread,

and then pull out about 10 cm (approx.

4 inches) of the threads and pass them under

the presser foot toward the rear of the

machine.

rInstall the the bobbin cover with tabs.

aBobbin cover with tabs

→This completes the upper and lower threading.

Note

• If utility stitches are to be used, refer to “CREATING

BOBBIN WORK (SEWING)” on page 10. If

embroidery patterns are to be used, refer to

“CREATING BOBBIN WORK (EMBROIDERY)” on

page 13.

Inhaltsverzeichnis

Andere Baby Lock Nähmaschine Handbücher

Baby Lock

Baby Lock Quilter's Choice Professional BLQP Bedienungsanleitung

Baby Lock

Baby Lock Acclam BLES4 Technisches Handbuch

Baby Lock

Baby Lock BLDY Bedienungsanleitung

Baby Lock

Baby Lock Sofia2 BL137A2 Bedienungsanleitung

Baby Lock

Baby Lock esante BLN Bedienungsanleitung

Baby Lock

Baby Lock Triumph BLETS8 Technisches Handbuch

Baby Lock

Baby Lock Melody Bedienungsanleitung

Baby Lock

Baby Lock Enterprise Installationsanleitung

Baby Lock

Baby Lock Embroidery Professional BMP8 Technisches Handbuch

Baby Lock

Baby Lock embellisher EMB12 Technisches Handbuch

Baby Lock

Baby Lock accomplish BL520B Technisches Handbuch

Baby Lock

Baby Lock Amelia BL100A Montageanleitung

Baby Lock

Baby Lock Ellisimo BLSO Technisches Handbuch

Baby Lock

Baby Lock Tiara BLTR16 Technisches Handbuch

Baby Lock

Baby Lock Model BLCS Bedienungsanleitung

Baby Lock

Baby Lock Symphony BLSY Montage- und Bedienungsanleitung

Baby Lock

Baby Lock SOLARIS BLSAU3 Bedienungsanleitung

Baby Lock

Baby Lock ellure plus BLR2 Bedienungsanleitung

Baby Lock

Baby Lock Ellisimo GOLD BLSOG Technisches Handbuch

Baby Lock

Baby Lock Tiara II BLTR16-2 Technisches Handbuch

Baby Lock

Baby Lock Elizabeth BL200A Technisches Handbuch

Baby Lock

Baby Lock Endurance BND9 Bedienungsanleitung

Baby Lock

Baby Lock BL-5180 Bedienungsanleitung

Baby Lock

Baby Lock Meridian 2 Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung