Baby Trend Smart STEPS My First Rocker 2 Bedienungsanleitung

RK02XXXA_2L_100722

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el

producto. CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

My First Rocker 2 Bouncer

1-800-328-7363

(8:00 a.m. ~ 4:30 p.m. PST)

www.babytrend.com

Baby Trend, Inc.

13048 Valley Blvd.

Fontana CA 92335

Instruction Manual

Manual de Instrucciones RK02XXXA

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT

BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any

product which has been subjected to misuse, abuse, abnormal use, excessive wear and

tear, improper assembly, negligence, environmental exposure, alteration or accident,

or has had its serial number altered or removed invalidates all claims against the

manufacturer. Any damage to property during installation is the sole responsibility of

the end user.

Customer Service Department can be contacted at 1 (800) 328-7363 Monday through

Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required

prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/

limited-warranty for complete warranty details.

GARANTIA

NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A

BABY TREND® PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.

La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la

compra. Cualquier producto que haya sido sometido a uso inadecuado, abuso, uso

anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental,

alteración o accidente, o cuyo número de serie haya sido alterado o removido, anula

todos los reclamos contra el fabricante. Cualquier daño a la propiedad durante la

instalación es la exclusiva responsabilidad del usuario final.

El Departamento de Servicio al Cliente está disponible llamando al 1 (800) 328-7363,

de lunes a viernes de 8:00 a.m. a 4:30 p.m. (PST). Se requiere una Autorización de

Devolución antes de poder devolver el o los productos a Baby Trend®. Visite http://

babytrend.com/pages/limited-warranty para conocer todos los detalles de la garantía.

Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335

1-800-328-7363 • (8:00am ~ 4:30pm PST)

www.babytrend.com

WARNING WARNING

WARNING! Not intended for infant sleep and

should never be used for this purpose.

FALL HAZARD: Babies have suffered skull

fractures falling while in and from Bouncers/Rockers.

• Use Bouncer/Rocker ONLY on oor.

• ALWAYS use restraints. Adjust to t snugly.

• NEVER lift or carry baby in Bouncer/Rocker.

SUFFOCATION HAZARD: Babies have

suffocated when Bouncers/Rockers tipped over on

soft surfaces and/or when Bouncers/Rockers have

been used as a sleep product.

• NEVER use on a bed, sofa, cushion, or other soft surface.

• Stay near and watch baby during use. This

product is not safe for sleep or unsupervised use.

If baby falls asleep, remove baby as soon as possible

and place baby on a rm, at sleep surface such as

a crib or bassinet.

TO PREVENT FALLS AND SUFFOCATION:

• ALWAYS use restraints. Adjust to t snugly.

• STOP using Bouncer/Rocker when baby starts trying to sit

up or has reached 20 lb (9 kg), whichever comes rst.

• Toy bar is NOT designed to be used as a carry handle.

• NEVER use on any elevated surface.

• NEVER leave baby unattended.

• NEVER Allow your Bouncer/Rocker to be used

as a toy.

• NEVER move Bouncer/Rocker with the child inside.

• NEVER substitute parts.

• Bouncer/Rocker is NOT intended for use as a carrier.

Check your Bouncer/Rocker for loose screws, worn

parts, torn material or stitching on a regular basis.

Replace or repair parts as needed.

Discontinue use of the Bouncer/Rocker should it

malfunction or become damaged.

IMPORTANT: Adult assembly required. Keep child away

during unpacking and assembly. Care should be

taken in unpacking and assembly. Examine product

frequently for damage, missing or loose parts. DO NOT

use if any parts are missing, damaged or broken.

Contact Baby Trend® for replacement part and

instructions if needed. Dial (800) 328-7363.

ASSEMBLY

PARTS

Check that you have all the parts for this model before assembling the Bouncer/Rocker.

Toy bar with removable toys

(Type may vary)

Headrest

(Type varies)

Vibraon Unit

*(2) Screws and (2) Nuts

Seat pad

Padded Support Tube

DO NOT remove the padding

Le / Right Base Frame Wire

(2) Backrest Tubes

IMPORTANT! To ensure safe operation of your

Bouncer/Rocker, please follow these instructions carefully.

Please keep these instructions for future reference.

IMPORTANT! Before assembly and each use, inspect

this product for damaged hardware, loose joints, missing

parts or sharp edges. NEVER use if any parts are missing or

broken.

IMPORTANT! Adult assembly is required. Keep child

away during unpacking and assembly.

(2) Base frame (tubes)

Base frame (Front) Base frame (Back)

*Screws and nuts aached in vibraon unit

and will require removal for assembly.

ASSEMBLY ASSEMBLY

Top frame

NOTE: Start with the 2

backrest bars to create the

top arch (1).

Ensure that they click into

position (2).

Bouncer/Rocker frame assembly

"Click"

Frame Orientation Diagram

NOTE: refer to the diagram as

a guide for the following frame

connections.

With the toy bar connectors

facing up, insert the arch ends

into the padded support tube

holes (Fig. 1a).

Ensure that they click into

position and slightly pull to

ensure the frame is secure

(Fig. 1b).

Vibraon unit

Front

Release tab

outward

Base frame

connectors

downward

Toy bar holes

upward

Padded

support tube

orientaon Top arch

orientaon

Facing up

Fig. 1a

"Click"

Fig. 1b

DO NOT

remove the

padding

ASSEMBLY ASSEMBLY

Attachment parts

Gather the parts and locate

the holes of the padded

support tube.

of the vibration unit. To see

inserting orientation, refer

to the Frame Orientation

Diagram on page 5

Attach the vibration unit

Screw into the frame

Use the screws and nuts to install the vibration unit.

Tighten

Screws

Fig. 3a

Fig. 3b

Rear frame view

Flip the Bouncer/Rocker frame

upside down and slip the cover

over the vibration unit (Fig 3a).

NOTE: Keep buckle straps over

the tubes at all times.

Inserting the padding

Holes Facing

down

Boom

of fabric

covering

vibraon unit

entry

Pull the fabric over the

vibration one side at a time

until completely wrapped

(Fig 3b).

Top arch

orientaon

*Screws and nuts aached in vibraon unit

and will require removal for assembly

Correct

Orientaon

ASSEMBLY ASSEMBLY

Complete the padding cover

by gently stretching the top

covering over the backrest

frame (Fig. 3c).

NOTE: Keep buckle straps

over the tubes at all times.

Buckle each corresponding

support straps (Fig. 3d).

Always maintain the straps

buckled during use.

Fig. 3d

Fig. 3c

Fig. 4b

Fig. 4a

Base frame attachment

Base Frame Orientation

Diagram

NOTE: refer to the diagram as

a guide for the following base

connections.

Base frame

tubes

Base frame

front

Staonary

feet

Base frame

back

Base assembly

NOTE: ensure that rubber on

tube matches same side as

flip-out stationary feet.

Facing down Insert each tube

end with the hole into the

Base frame (back) part with

the tab until they click

(Fig. 4a).

NOTE: ensure that rubber on

tube matches same side as flip-

out stationary feet.

Facing down Insert each

opposite tube ends with the

into the Base frame (front)

firmly until they lock (Fig. 4b).

ASSEMBLY ASSEMBLY

Base frame wire connection

Locate the and base frame,

right and left base frame

wires (Fig. 4c).

NOTE: Base frame wires must

be curved inward toward base

for proper installation (Fig. 4d).

Fig. 4c

Fig. 4d

Fig. 4e Fig. 4f

Insert each base frame wire in firmly (Fig. 4e). Both

must click into position (Fig. 4f).

Flip-out the 2 stationary feet

NOTE: use the 2 feet to assist in

assembing the Bouncer/Rocker

frame sections (Fig. 5a).

Rotate the stationary feet out

on both front and back sides of

the base frame (Fig. 5b).

Align frames

Align the complete seat frame with

the base frame wire. Press in firmly

(Fig. 5c).

Connect the frames

Front Back

Fig. 5a

Fig. 5b

Fig. 5c

SAFETY

ASSEMBLY

Release

Fig. 5d

Fig. 5e

Fig. 5f

Fig. 6a

Secure the Bouncer/Rocker Frame

Push the wire into the connection

firmly (Fig. 5d).

The connectors and base frame

wires are secure only when they

click into position (Fig. 5e).

Harness release

If buckled, unbuckle the straps on each side of the seat restraint

(Fig. 6a).

SEAT RESTRAINT

Completed Bouncer/Rocker Frame

The completed frame assembly

should look exactly as illustrated

in (Fig. 5f).

ASSEMBLY

SAFETY

Head Pillow

To attach the pillow, thread the hook and loop fastener through the

loop at the top front of the fabric.

NOTE: product may be used with or without the head pillow.

Accessory

Child placement

Carefully place the child in

the Bouncer/Rocker seat

and buckle the waist straps

into the crotch buckles

(Fig. 6b).

Buckle may be tucked under

the fabric (Fig. 6c).

Adjustment buckle

Always adjust the straps

so that the restraint fits

the child snugly (Fig. 6d).

Fig. 6b

Fig. 6c

Fig. 6d

Tighten

Inhaltsverzeichnis

Sprachen:

Andere Baby Trend Baby- und Kleinkindmöbel Handbücher

Baby Trend

Baby Trend HC05 Series Bedienungsanleitung

Baby Trend

Baby Trend PY86 J Series Bedienungsanleitung

Baby Trend

Baby Trend WK37A Bedienungsanleitung

Baby Trend

Baby Trend Resort Elite PY72 B Series Bedienungsanleitung

Baby Trend

Baby Trend Nursery Center Bedienungsanleitung

Baby Trend

Baby Trend Secure-Lift 35 Bedienungsanleitung

Baby Trend

Baby Trend PY72B Bedienungsanleitung

Baby Trend

Baby Trend Mod Potty Bedienungsanleitung

Baby Trend

Baby Trend GT07D96A Bedienungsanleitung

Baby Trend

Baby Trend TY01A Bedienungsanleitung

Baby Trend

Baby Trend Nurcery center PY81929 Bedienungsanleitung

Baby Trend

Baby Trend PY66A06F Bedienungsanleitung

Baby Trend

Baby Trend PY86B Bedienungsanleitung

Baby Trend

Baby Trend RC81D32 Bedienungsanleitung

Baby Trend

Baby Trend Nurcery Center PY87983 Bedienungsanleitung

Baby Trend

Baby Trend 8836 Bedienungsanleitung

Baby Trend

Baby Trend Trend Playard Bedienungsanleitung

Baby Trend

Baby Trend Nurcery Center PY81988 Bedienungsanleitung

Baby Trend

Baby Trend PY81979 Bedienungsanleitung

Baby Trend

Baby Trend RC34 Series Bedienungsanleitung

Baby Trend

Baby Trend BT05 Series Bedienungsanleitung

Baby Trend

Baby Trend GT07 A Series Bedienungsanleitung

Baby Trend

Baby Trend PY75 A Series Bedienungsanleitung

Baby Trend

Baby Trend 8274BCC Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung