Baicells Nova430i Bedienungsanleitung

Nova430i

Outdoor 4x250mW eNodeB

Quick Guide

P/N: 1701000170

Document version: 02

1.Product Overview

Introduction1.1

Baicells Nova430i is an advanced two-carrier outdoor eNodeB based on LTE TDD

technology, which is developed by Baicells. It is capable of operating in Carrier

Aggregation (CA) or Dual Carrier (DC) mode.

In CA mode, contiguous or non-contiguous channels are aggregated to provide up to 40

MHz bandwidth. This essentially doubles the downlink capacity when the CA 430i is

used with all CAT6/7 user equipment.

In DC mode, each carrier is treated as an independent cell, supporting 96+96 users, and

each supporting 5, 10, 15, or 20 MHz bandwidth. Using a Nova430i in DC mode

simplifies and streamlines the deployment of split sectors.

In addition to having the option to operate Nova430i in either CA or DC mode, HaloB (an

embedded MME option) comes as a default feature in the base software. Baicells's

patented HaloB solution migrates the necessary core network functions to the eNB.

Features1.2

Compact, all-in-one design of internal antenna and integrated GPS

Citizens Broadband Radio Service (CBRS) band covers with dual carrier.

Based on 3GPP international standard TDD LTE technology; provide high speed

data service; support a maximum aggregation peak rate of DL: 220Mbit/s, UL:

14Mbit/s with 2x20MHz spectrum, using CAT 6/7 or higher users.

Support flexible uplink and downlink time slot ratio: 1(2:2), 2(1:3), and high speed

data transmission.

Support 5MHz/10MHz/15MHz/20MHz operation bandwidth.

96 concurrent users per carrier, 96+96 in DC mode.

Support copper (RJ-45) backhaul, flexible to deploy.

PoE++ power supply, only one Ethernet cable required for data transmission and

power supply.

Security services to provide timely protection against potential security risks and

illegal intrusion.

Support simple and convenient local and remote web management.

Integration as required, easy to installation and deployment, accurate

coverage and improved network capacity.

Support network management functions, which includes the management,

monitoring and maintenance.

Appearance1.3

The Nova430i interfaces are described in Table 1-1.

Table 1-1 Nova430i Interface Description

Interface Name

Description

ETH

RJ-45 interface (FE/GE)

Used for power supply, debug or data backhaul.

PoE++, complied with IEEE 802.3bt standard

OPT

Reserved optical interface.

The Nova430i interface indicators are described in Table 1-2.

Table 1-2 Nova430i Interface Indicators

Identity

Color

Status

Description

PWR

Green

Steady On

Power on

OFF

No power supply

CELL1

Green

OFF

CELL1 is in inactivated.

Fast flash: 0.1s on,0.1s off

CELL1 is in deactivated.

Slow flash: 1s on,1s off

CELL1 is in activated.

CELL2

Green

OFF

CELL2 is in inactivated.

Fast flash: 0.1s on,0.1s off

CELL2 is in deactivated.

Identity

Color

Status

Description

Slow flash: 1s on,1s off

CELL2 is in activated.

ALM

Red

Steady On

Hardware alarm

OFF

No alarm

Technical Specification1.4

1.4.1 Hardware Specification

Item

Description

LTE Mode

LTE TDD

LTE Frequency

Band48, and partial band42,band43

Channel Bandwidth

5MHz, 10MHz, 15MHz, 20MHz per carrier

Output Power

24 dBm per antenna

Receive Sensitivity

-100 dBm

Synchronization

GPS

Backhaul

1 RJ-45 Ethernet interface (1 FE/GE)

MIMO

DL 2 x 2 on each carrier, 2 carriers

Dimension

309mm(H) x 227mm(W) x 104mm(D)

Installation Type

Pole or wall mount

Antenna Type

Built-in 4 high-gain LTE antennas

Horizontal Beamwidth 65±10°

Vertical Beamwidth 17°

Polarization: ±45°

Antenna Gain

13.5 ±0.8 dB

Power Consumption

Typical 20W, MAX 25W

Power Supply

PoE++, comply with IEEE 802.3bt standard

Weight

4.85kgs

MTBF

≥ 150000 hours

MTTR

≤ 1 hour

NOTE: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on

5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.

1.4.2 Global Part Numbers

Model No.

Description

pBS3101S

Band48, 10MHz, 20MHz per carrier, DL 2 x 2 on each

carrier, 2 carriers, Built-in antenna.

1.4.3 Software Specification

Item

Description

LTE Standard

3GPP Release 15

Peak Rate

2x20 MHz:

SA1: DL 2x80 (160)Mbps, UL 2x28 (56)Mbps

SA2: DL 2x110 (220)Mbps, UL 2x14 (28)Mbps

2x10MHz:

SA1: DL 2x40 (80)Mbps, UL 2x14 (28)Mbps

SA2: DL 2x55 (110)Mbps, UL 2x7 (14)Mbps

2x20 MHz:

SA1: DL 160Mbps, UL 28Mbps

SA2: DL 220Mbps, UL 14Mbps

2x10MHz:

SA1: DL 80Mbps, UL 14Mbps

SA2: DL 110Mbps, UL 7Mbps

User Capacity

96 concurrent users in single carrier mode

96+96 concurrent users in DC mode

96 concurrent users in CA mode

QoS Control

3GPP standard Quality of Service Class Identifier (QCI),

support SC1

Modulation

UL: QPSK, 16QAM, 64QAM

DL: QPSK, 16QAM, 64QAM

Voice Solution

VoLTE

Traffic Offload

Local breakout

SON

Self-organizing network:

Automatic setup

Automatic Neighbor Relation (ANR)

PCI confliction detection

Network Mgmt

TR-069,SNMP

Maintenance

Support remote/local maintenance, based on SSH protocol

Support online status management

Support performance statistics

Support failure management

Support configuration management

Support local or remote software upgrading and loading

Support log

Support connectivity diagnosis

Support automatic start and configuration

Support alarm reporting

Support user information tracing

Support signaling trace

1.4.4 Environment Specification

Item

Description

Operating Temperature

-40°C to 55°C

Storage Temperature

-50°C to 65°C

Humidity

5% to 95%

Atmospheric Pressure

70 kPa to 106 kPa

Ingress Protection Rating

IP66

Power Interface Lightning Protection

Differential mode: ±10KA

Common mode: ±20KA

1.4.5 Regulatory Compliance

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

40cm between the radiator & your body.

2.Installation

Install on Pole2.1

The position of the eNB on the pole should be at least 47 inches (120 cm) in height.

After installation, adjust the eNB to a proper angle by adjusting the adjustable bracket.

Install on Wall2.2

NOTE: The wall must bear at least 4 times the weight of the eNB.

Connect Cables2.3

Power on the eNB, and wait a few minutes while the eNB boots up. Per the previous

Table 1-1 and Table 1-2 in “1.3 Appearance”, check that the LED indicators are lighting

as expected.

Andere Handbücher für Nova430i

Inhaltsverzeichnis

Andere Baicells Netzwerk-Hardware Handbücher

Baicells

Baicells EG2013B-M11 Bedienungsanleitung

Baicells

Baicells Nova430e Bedienungsanleitung

Baicells

Baicells Atom ID0406-6.5 Bedienungsanleitung

Baicells

Baicells Nova-436Q Bedienungsanleitung

Baicells

Baicells Neutrino430 Bedienungsanleitung

Baicells

Baicells Nova846 Bedienungsanleitung

Baicells

Baicells Nova230i Bedienungsanleitung

Baicells

Baicells Aurora243 Bedienungsanleitung

Baicells

Baicells BS6430E Bedienungsanleitung

Baicells

Baicells Nova430e Bedienungsanleitung

Baicells

Baicells Atom OD040615 Bedienungsanleitung

Baicells

Baicells EG8015Q-M11 Bedienungsanleitung

Baicells

Baicells EG3015M-M30-HP Bedienungsanleitung

Baicells

Baicells Nova230i Bedienungsanleitung

Baicells

Baicells Nova846 Bedienungsanleitung

Baicells

Baicells Nova430i Bedienungsanleitung

Baicells

Baicells Nova-436Q Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung