Balanced Audio Technology REX Bedienungsanleitung

REX

WARRANTY REGISTRATION FORM

Unit Serial Number: _______________________________________

Customer Name: _______________________________________

Address: _______________________________________

_______________________________________

Date of Purchase: _______________________________________

Purchased From:

Dealer Name: _______________________________________

Address: _______________________________________

_______________________________________

IMPORTANT NOTE:

In order to receive the full five year product warranty, please mail this completed

form together with a copy of your sales receipt to Balanced Audio Technology at the

address below, within thirty days of purchase.

Failure to do so will result in the product being warrantied for one year from the

date of manufacture.

1300 First Stat Blvd. Suite A Wilmington DE 19804 Tel: 302-999-8855 Fax: 302-999-8818

REX

Vacuum Tube

Balanced Stereo Preamplifier

Owner's Manual

1300 First Stat Blvd. Suite A Wilmington DE 19804 Tel: 302-999-8855 Fax: 302-999-8818

TABLE OF CONTENT

CURRENT SOURCES 4

CHANGING CURRENT SOURCES 5

AC SHUNT VOLTAGE REGULATORS 6

INTRODUCTION 7

Package Content 7

Physical Placement 8

Configuring the REX 8

Connecting to your system 9

FRONT PANEL CONTROLS 10

REX Power On sequence 10

Turning the REX Off 10

PHASE Button and LED 11

MONO button and LED 11

MUTE button and LED 11

INPUT selection 11

VOLUME knob 11

DISPLAY format 12

FUCTION button 12

DISPLAY Brightness function 13

MUTE function 13

REX PROGRAMMABLE FUNCTIONS 14

Parameter Definitions 15

PROGRAMMING THE REX 15

BALANCE adjustment 15

VOLUME offsets 16

PHASE 17

MONO/STEREO 17

MAXIMUM gain 17

FIXED gain 18

DISPLAY MODE 18

INPUT NAME 19

REMOTE CONTROL FUNCTIONS 20

Volume Up/Down 20

Mute 20

Fade 20

Input 20

Display/Power 21

Fuse Protection 21

Servicing 21

Cleaning 21

RESETTING THE REX 22

WARRANTY 23

Vacuum Tube Current Sources in REX

Your REX incorporates a unique feature that allows you to optimize its sound to tailor it to your

individual taste or system requirements.

The Vacuum Tube current sources incorporated in the REX, being part of the signal gain stage, have a

direct effect on the unit’s sound. Changing the tube type used in that circuit allows the user an extra

degree of control over the sound of the unit.

In its standard configuration the REX current sources use the Russian 6C19 tubes. That tube is basically

a miniature version of the famous 6C33 tube, and provides, in our view, the best combination of sonic

characteristics and electrical performance.

However, the unique design of the REX allows you to also use other tube types in that application.

Currently, the user has the following three choices for vacuum tube Current Sources:

1. The standard 6C19 tube current source as installed from the factory.

2. The 6H30 SuperTube current source which requires the purchase of the X-PAK accessory.

3. The 5881 tube current source.

NOTE: There are TWO Current Sources in REX, located in the Power Module.

The REX X-PAK accessory includes two current source boards.

In order to change the tube type the user needs to remove the installed Current Source boards, and replace

them with either another type, designed for a particular tube type, or install the 5881 tubes as a direct plug-in.

Only the 5881 tubes can be used directly upon the removal of the 6C19 current source board.

Please consult the factory regarding options for other tube types that may be available in the future.

WARNING:

The following procedure should only be performed by qualified personnel

To change the current source:

1. Turn the unit OFF and wait at least 5 minutes to allow the tubes to cool down and the power

supply charge to dissipate. Remove the Power Module top cover.

2. Remove the six screws holding each current source board.

3. Pull the current source boards straight up to disengage its connectors.

4. Install the new current source boards making sure their connectors are properly aligned. Boards

will be positioned properly when the mounting holes in the circuit boards align with the standoffs.

5. Install the six mounting screws.

6. Turn the unit ON.

AC SHUNT VOLTAGE REGULATORS

The REX preamplifier incorporates another feature that allows the user to optimize its sound – the

AC Shunt voltage regulators.

The AC Shunt voltage regulators perform the final “cleaning” of the REX power supply rails. They

work to reduce the minute fluctuations in the DC voltages that may degrade the sound.

The AC Shunt Voltage Regulators are located in the REX Power Module.

They incorporate two types of vacuum tubes, user selectable for the desired sound: 6C45 and 6H30.

To change the AC Shunt tube type remove the Power Module top cover and move the board-mounted

switch S1 to desired position. The switch is located close to the center of the board.

Only the selected tubes will have their filaments running at any time.

INTRODUCTION

Thank you for your purchase of the Balanced Audio Technology REX preamplifier. Please

read this owner's manual to obtain the full benefit of the REX in your system. It will provide you

with the needed safety information and operating procedures for this exceptional unit.

WARNINGS:

To prevent the possibility of serious injury, electrical shock or fire:

DO NOT operate with the cover removed.

DO NOT expose to rain or moisture.

DO NOT defeat the ground power-plug.

DO NOT replace fuse with anything other than the same type and rating as supplied by the factory.

Package Contents

Included in the box set should be the following:

Description Quantity

REX Control Module 1

REX Power Module 1

Power Cord 2

Spare Fuse 2

Torx Wrench (T-10) 2

Spare Top Cover Screws 10

User’s Manual 1

VK-R3 Remote Control (If ordered)

Save all the packaging material in a safe dry area for the unlikely event that you need to return

the REX to the factory for service.

PHYSICAL PLACEMENT

It is recommended that you provide at least 6" of free space around each module comprising the REX

preamlifier for proper ventilation.

Mount the modules on a hard surface with proper ventilation underneath.

Do not stack the REX preamplifier on top of other units, nor vice versa.

WARNING

Stacking the modules (putting the Control Module on top of the Power Module)

is NOT permitted.

CONFIGURING THE REX PREAMPLIFIER SYSTEM

The REX preamplifier system consists of two modules.

Control Module performs all the control functions associated with the duties of the

preamplifier in your system. It also receives and processes the remote control commands.

Power Module works in conjunction with the Control Module as an outboard power supply.

The two modules are connected by two detachable cables. In addition each module has its own

power cord that must be plugged into the power outlet.

WARNING

Make sure your REX is powered DOWN before making or changing ANY

connections between its two modules, to the source components or power

amplifiers.

Connect the two detachable cables between the modules, making sure the channels are connected

properly.

Plug the two power cords into power receptacles.

Make all the signal connections.

CONNECTING THE REX TO YOUR SYSTEM

Balanced Components

Use balanced XLR interconnects. All input and output connectors are clearly marked on the back

panel.

Note: The REX XLR connectors are wired as follows:

Pin 1: common/shield

Pin 2: positive

Pin 3: negative

For the REX, use the Main 1 XLR Output for connection to your balanced power amplifier. The

Output 2 is configured as an RCA connector output.

Single-Ended Components

Single-ended components have RCA connectors. The REX preamplifier is designed to work

with balanced interconnects only. If single ended components need to be connected to the

preamplifer, then the RCA/XLR adapters should be used. These adapters are available from an

authorized Balanced Audio Technology dealer at a nominal charge.

Two types of adapters are available:

Input Adapters: RCA Female to XLR Male

Output Adapters: RCA Female to XLR Female.

REX FRONT PANEL CONTROLS

STANDBY Button and LED

The Standby button is used to turn the unit ON and OFF and to switch the preamplifier into its

Standby mode. The LED indicates the status of the unit’s power circuitry and has four state:

LED OFF Display OFF Unit is in OFF state

Display ON Unit is in ON state

LED Flashing Unit is going through its Power-ON routine

LED ON Unit is in its STANDBY mode

When the unit is plugged into a power line, it will stay in the OFF state until the Standby button is

pushed. The LED will then start blinking and the unit will go through a 50second warm-up sequence.

At the end of that sequence it will turn ON.

Pressing the button again will switch the unit into its Standby mode.

The REX can be turned OFF by pressing and holding the Standby button.

REX Power-On sequence:

When you turn the REX On, it will automatically go through a gentle power-on sequence. This

sequence takes 50 seconds, during which time the display and the Standby LED will be flashing,

indicating the status of the unit.

In addition, the blue LED on the Power Module front panel will also light.

1. The number on the display during this time indicates the volume setting. This will usually

start at 000. This setting can be changed during this time by using the volume knob or

Volume Up/Down buttons on your VK-R3 remote control transmitter. In addition, such

functions as Phase, Mono, input selection and Mute can be changed during this time either

from front panel or through the remote control.

2. Normally the REX will be not muted (Mute LED on the display is OFF) and will begin playing

at the end of the 50 second delay. If so desired, the unit can be put in the MUTE mode during

this delay interval either by depressing the front panel MUTE switch or by using the MUTE

button on the VK-R3 remote control transmitter.

Turning the REX Off:

The unit can be turned OFF by pressing and holding the Standby button. It will automatically mute.

Inhaltsverzeichnis

Andere Balanced Audio Technology Verstärker Handbücher

Balanced Audio Technology

Balanced Audio Technology VK-P3 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-P10SE Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-3iX Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-1000 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-P5 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-600M Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-52SE Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-40 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-200 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-31 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-6200 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-53SE Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-50 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-55 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-60 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-300x Special Edition Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-50SE Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-60SE Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-51SE Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-33SE Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology Phono Module Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-32 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-5 Bedienungsanleitung

Balanced Audio Technology

Balanced Audio Technology VK-75 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung