Balluff BNI PNT-502-105-Z015 Bedienungsanleitung

BNI PNT-502-105-Z015

IP67 Modules

4 IO-Link/In-/Outputs,12 In-/Outputs

User’s Guide

www.balluff.com

Content

1Notes 3

1.1. About this guide 3

1.2. Structure of the guide 3

1.3. Typographical Conventions 3

Enumerations 3

Actions 3

Syntax 3

Cross-references 3

1.4. Symbols 3

1.5. Abbreviations 3

2Safety 4

2.1. Intended use 4

2.2. General safety notes 4

2.3. Meaning of the warnings 4

3Getting Started 5

3.1. Modul overview 5

3.2. Mechanical connection 6

3.3. Electrical connection 6

Power Supply 6

Grounding 6

PROFINET Interface 6

I/O-Port 7

IO Link-Port 7

4Technical data 8

4.1. Dimensions 8

4.2. Mechanical data 8

4.3. Operating conditions 8

4.4. Electrical data 8

4.5. PROFINET 9

4.6. Function indicators 9

Modul status 9

Port 9

5Integration 10

5.1. Configuration 10

GSDML-File 10

Including the module to Configuration 11

Object properties 11

Naming of the device 12

Configuration of the Ethernet address 12

Finish Hardware Configuration 13

Integration to the ProfiNet network 13

Scanning the system 14

Succesfully integrated in the system 14

6Webserver 15

6.1. General 15

6.2. Home 15

6.3. Diagnostic Process 15

6.4. Device Properties 15

6.5. Diagnostic Module 15

6.6. Configurations 15

www.balluff.com

Content

7Appendix 16

7.1. Included material 16

7.2. Ordercode 16

7.3. Order Information 16

Balluff Network Interface Profinet, BNI PNT-502-105-Z015

www.balluff.com

1Notes

1.1. About this guide

The BNI PNT-…serves as a decentralized IO-Link, input and output module for connecting

to an ProfiNet™ network.

1.2. Structure of the

guide

The guide is organized so that the chapters build on one another.

Chapter 2: Basic safety information.

Chapter 3: The main steps for installing the device.

Chapter 4: Technical data for the device

Chapter 5: Integration

Chapter 6: Process data

Chapter 7: Display

Chapter 8: Webserver

Chapter 9:Appendix

1.3. Typographical

Conventions

The following typographical conventions are used in this Guide.

Enumerations

Enumerations are shown in list form with bullet points.

•Entry 1,

•Entry 2.

Actions

Action instructions are indicated by a preceding triangle. The result of an action is indicated

by an arrow.

Action instruction 1.

Action result.

Action instruction 2.

Procedures can also be shown as numbers in brackets.

(1) Step no. 1

(2) Step no. 2

(3)

Syntax

Numbers:

Decimal numbers are shown without additional indicators (e.g. 123),

Hexadecimal numbers are shown with the additional indicator hex (e.g. 00hex) or with the

prefix “0x” (e.g. 0x00)

Cross-references

Cross references indicate where additional information on the topic can be found (see

chapter 4 ”Technical Data”).

1.4. Symbols

Note tip

This symbol indicates general notes.

Note

This symbol indicates a security notice which most be observed.

1.5. Abbreviations

BNI Balluff Network Interface

I Standard input port

PNT ProfiNet™

EMV Electromagnetic Compatibility

FE Function ground

O Standard output port

www.balluff.com

2Safety

2.1. Intended use

This guide describes The BNI PNT-…serves as a decentralized IO-Link, input and output

module for connecting to an ProfiNet™ network.

2.2. General safety

notes

Installation and startup are to be performed only by trained specialists. Any damage

resulting from unauthorized manipulation or improper use voids the manufacturer’s

guarantee and warranty.

The device is in accordance with EMC Class A. Such equipment may generate RF noise.

The operator must take precautionary measures accordingly.

The device must be powered only using an approved power supply (see chapter 4

“Technical data”). Only approved cable may be used.

Operating and testing

The operator is responsible for observing local prevailing safety regulations.

When defects and non-clearable faults in the device occur, take it out of service and secure

against unauthorized use.

Approved use in ensured only when the housing is fully installed.

2.3. Meaning of the

warnings

Note!

The pictogram used with word ”Caution“ warns of a possible hazardous situation

affecting the health of persons or equipment damage. Ignoring these warnings can

result in injury or equipment damage.

Always observe the described measures for preventing this danger.

Balluff Network Interface Profinet, BNI PNT-502-105-Z015

www.balluff.com

3Getting Started

3.1. Modul overview

Figure 1 –Overview BNI PNT-502-105-Z015

1 Mounting hole

2 PROFINET ™port 2

3 Display

4 Power Supply In

5 Status LED

6 Port 1 (Standard I/O)

7 Pin/Port LED: Signal status

8 Port 3 (Standard I/O)

9 Port 5 (IO-Link, Standard I/O)

10 Port 7 (IO-Link, Standard I/O)

11 Port 6 (IO-Link, Standard I/O)

12 Port 4 (IO-Link, Standard I/O)

13 Port 2 (Standard I/O)

14 Port 0 (Standard I/O)

15 Power Supply Out

16 Label

17 PROFINET™port 1

18 Grounding connection

www.balluff.com

3 Getting Started

3.2. Mechanical

connection

The module is attached using 2 M6 screws and 2 washers.

Isolation pad as accessory available

3.3. Electrical

connection

Power Supply

Power supply “IN” (7/8”, male)

Function

Description

GND actuator power supply

0 V

GND Bus- / Sensor power supply

0 V

Grounding

Bus- / Sensor power supply

+24 V

Actuator power supply

+24 V

Power supply “OUT”(7/8” female)

Function

Description

GND actuator power supply

0 V

GND Bus- / Sensor power supply

0 V

Grounding

Bus- / Sensor power supply

+24 V

Actuator power supply

+24 V

Note

Provide sensor/bus power and actuator power from separate power sources if

possible.

Total current <9A per Pin. The total current of all modules may not exceed 9A

even when daisy chaining the actuator supply.

Grounding

Note!

The FE connection from the housing to the machine must be low-impedance

and kept as short as possible.

PROFINET

Interface

M12, D-coded, female

Function

Tx+

Rx+

Tx-

Rx-

Note!

Unused I/O port socket must be fitted with cover caps to ensure IP67 protection

rating.

Balluff Network Interface Profinet, BNI PNT-502-105-Z015

www.balluff.com

3 Getting Started

I/O-Port

M12, A-coded, female

Function

+24V, 200mA

Input / Output

GND

Input / Output

Note!

For the digital sensor inputs follow the input guideline per EN61131-2, type 2.

Note!

Each output serves a maximum current of 2,0 amperes. The IO-Link Ports only

1,6 A. Total current of the module has to be lower than 4 amperes per Pin.

Note!

Unused I/O port socket must be fitted with cover caps to ensure IP67 protection

rating.

IO Link-Port

M12, A-coded, female

Function

+24V, 1,6 A

Input / Output

GND

IO-Link / Input / Output

n.c.

www.balluff.com

4Technical data

4.1. Dimensions

4.2. Mechanical data

Housing material

Die case zinc, matt nickel plated

Enclosure rating per IEC 60529

IP 67 (only when plugged-in and threaded-in)

Supply voltage

7/8” 5-pin male

Input ports / Output ports

M12, A-coded (8 x female)

Dimensions (W x H x D in mm)

68 x 224 x 30.9

Mounting type

2-hole screw mount

Ground strap attachment

Weight

Approx. 670 gr.

4.3. Operating

conditions

Operating temperature Ta

Storage temperature

-5 °C ... 70 °C

-25 C ... 70 °C

EMC

- EN 61000-4-2/3/4/5/6

- EN 55011

- Severity level 2B/3A/4B/2B/3A

- Gr.1, CL. B

Shock/vibration

EN 60068-2-6, EN 60068-2-27

EN 60068-2-29, EN 60068-2-64

4.4. Electrical data

Supply voltage

18...30.2 V DC, per EN 61131-2

Ripple

<1%

Input current at 24 V

130 mA

Balluff Network Interface Profinet, BNI PNT-502-105-Z015

www.balluff.com

4 Technical data

4.5. PROFINET

PROFINET port

1 x 10Base-/100Base-Tx

Connection for PROFINET port

M12, D-coded

Cable types per IEEE 802.3

Shielded twisted pair min. STP CAT 5/ STP CAT 5e

Data transmission rate

10/100 Mbit/s

Max. cable length

100 m

Flow control

Half Duplex/Full Duplex (IEEE 802.33x-Pause)

4.6. Function indicators

Modul status

LED

Funktion

green

Input power OK

red

Low Input power (<18V)

green

Output power OK

red

Low Output power (< 18V)

off

No error

red

Watchdog timeout; channel, generic or extended diagnosis

present; system error

red flashing

DCP signal service is initiated via the bus

off

No error

red

No configuration; or low speed physical link; or no physical

link

red flashing

No data exchange

100

off

Bus clock: 10 Mbit/s

yellow

Bus clock: 100 Mbit/s

green

Data transfer

Port

Standard Port

Status

Function

off

State of the Input or Output Pin is 0

yellow

State of the Input or Output Pin is 1

IO-Link Port

Status

Function

green

IO-Link connection established

green flashing

No IO-Link communication

red flashing

Validation failed

Status

Port configuration

Diagnostic Input

Input

Output

red

Input low

short-circuit

Pin 1 und 3

short-circuit

on output Pin

red short flashing

short-circuit

Pin 1 und 3

Status –LEDs: Modul status

Port/Pin LEDs:

Status of the IO Link and I/O ports

Inhaltsverzeichnis

Andere Balluff Netzwerk-Hardware Handbücher

Balluff

Balluff Easy Tool-ID BSG TID-05-T30-00-005 Betriebsanleitung

Balluff

Balluff BNI00H7 Bedienungsanleitung

Balluff

Balluff BNI EIP-508 05-Z015 Series Bedienungsanleitung

Balluff

Balluff BNI IOW-560-W01-K022 Bedienungsanleitung

Balluff

Balluff BIC 1I12-P2A25-M30MI1-BPX05-110 Bedienungsanleitung

Balluff

Balluff BIC 1I22-P2A02-M18MN2-EPX07-050 Bedienungsanleitung

Balluff

Balluff BNI PG3-508-0C5-Z015 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung