Bandai Namco JUMBO JUMPIN' Bedienungsanleitung

JUMBO

JUMPIN'

OPERATORS MANUAL

Important

Read PRECAUTIONS and INSTALLATION

Sections before operating game

FCC Notice

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operating in a

commercial environment. This equipment uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

Jumbo Jumpin’Operators Manual

TABLE OF CONTENTS

1.0 SPECIFICATIONS 1

2.0 INTRODUCTION 2

3.0 PRECAUTIONS 2

3.1 Installation 2

3.2 Handling 2

4.0 INSTALLATION 3

5.0 OPTION MENU

6.0 ERROR MESSAGES

7.0 DIAGNOSTICS

8.0 GAME PLAY

9.0 TROUBLESHOOTING

5-6

APPENDIX A: PARTS LIST 9

APPENDIX B: WIRING DIAGRAM 10

Jumbo Jumpin’Operators Manual

1.0 SPECIFICATIONS

Logic Power Supply:

Input Power:

Overall Height:

Crated Dimensions:

Installed Dimensions:

Shipping Weight:

Convenience Kit: (1)

(located in coin box) (1)

350 Watt

120/220 VAC,50/60 Hz, 5 Amps max

106.5”

77”H x 111”W x 30”D

106.5”H x 73”W x 92”D

600 lbs

Operators Manual

Power cord

Linking cable (1)

Note: Specifications subject to change without prior notice. Modifications and/or

alterations of the Jumbo Jumpin’



game with kits or parts not supplied by

BANDAI NAMCO Amusement may void the warranty.

WARNING

REMOVAL OF SERIAL NUMBERS AND/OR BAR-CODES FROM PRODUCT OR

COMPONENTS WILL VOID THE WARRANTY

Jumbo Jumpin’Operators Manual

2.0 INTRODUCTION

BANDAI NAMCO'sJumbo Jumpin’



is a redemption game featuring an interactive virtual

jump rope. Players select between classic and double dutch experiences.

Those that successfully jump until the progress bar fills up win the bonus!

3.0 PRECAUTIONS

3.1 Installation

This game is designed for indoor use only. It must not be installed outdoors. The

following conditions must be avoided:

1. Direct exposure to sunlight, extreme high humidity, direct water contact,

dust, high heat or extreme cold.

2. Vibration. The game must be installed on a level surface.

Do not install in an area such that the game would present an obstacle in case of

an emergency (i.e., close to fire equipment or emergency exists).

3.2 Handling

1. Before operating the game, make sure that the main AC power hookup

includes a safety ground. This will ensure safe operation as well as

compliance with the applicable FCC and UL regulations. Measure the AC

power line voltage. Verify that the voltage selection switch on the power

supply is set to the correct setting.

2. Before replacing any parts, turn the AC power OFF and unplug the game.

3. Do not attempt to repair the Printed Circuit Board (PCB) on-site. It contains

sensitive integrated circuit chips that could be easily damaged, even by the

small internal voltage of a multi-meter. Always return the PCB to your

distributor for any repairs.

Jumpin' JackpotOperators Manual

INSTALLATION

Note: Shipping damage may void the warranty. In case of shipping damage, contact your

distributor and the transportation carrier immediately.

1. Unpack the game.

2. Position the game close to its final location.

3. Carefully raise the main game back panel to a vertical position and attach the left

and right side supports using the supplied 16-bolts and 4 mounting brackets. See

Figure 1.

4. Place the floor mat into position and attach it to the lower backpanel frame using

the supplied 2 bolts. See Figure 1.

5. Connect the floor mat cable to the mating cable located at the bottom center of the

light ring.

6. If a single stand alone game is being installed, skip to step 7. If two games are to be

linked together: Remove all but the top two screws on the back panels. Loosen the

top two screws on both games a couple of turns. Then feed one supplied linking

cable (Cat 5 RJ45 patch cord) through the back panel holes and attach one end to

each main logic port labeled “LINK”. See Figure 2. Once connected, reinstall allback

panel screws being careful not to over tighten.

7. Attach the power cord to the game and wall outlet, and turn on the power. Wait a

couple of minutes while the game completes its power on diagnostics. Ifthis isthe

first time the game is turned on, you may be presented with a screen reporting

“MASTER UNIT NOT DETECTED”. This isnormal operation. and you should press

the “MENU” button to enter the game options mode. Iftwo games are linked, only

press the menu button on one of the games (it doesn’t matter which game you

choose)

8. Follow the on screen prompts. Review and change any of the options as required. If

necessary, refer to the Option Menu section of this manual for detailed explanations

for each option. When complete, exit the options mode by pressing the menu

button.

The game is ready to play!

Figure 2

Figure 1

Jumbo Jumpin’Operators Manual

OPTION MENU

Enter the options menu by pressing the “MENU” button located on the service panel inside

the coin door. Advance through all options by pressing the “TEST” BUTTON. Increase

displayed values with your foot by stepping on the right side of the mat. Reduce values

using your foot by stepping on the left side of the mat..

The Game options include the following choices:

1- GAME VOLUME This sets the volume for when a game is being played. Setting

it to “1" isthe softest and “10" isthe loudest. (Default setting is“8")

2- ATTRACT VOLUME This sets the volume of the music that plays during the

attract mode. The range is “OFF”, “1” isthe softest and “10" is the loudest. (Default

setting is“5")

3- COINS TO START PLAY This option determines how many coins (pulses on the

COIN #1 input) will start a game. The range is “FREE PLAY”, 1 – 8. The default

value is “1” and is typical for card reader systems. The Free play setting is for

demonstration and trade shows. Free play games start when a player stands in the

jump zone. Any tickets awarded during free play display as normal, but will not be

dispensed.

4- COIN #2 VALUE The second coin input can be set to a higher value in multiples of

coin #1. For example: Let;s say you want to accept quarters ($0.25) as coin #1

and dollars ($1.00) as coin #2. Setting the COIN #2 VALUE to 4 tells the game that

each pulse on the coin #2 input = 4 pulses on the coin #1 input. This helps make

the coin counter work properly using different coin values. The range is “OFF”, 1 –

8. The default setting is “1” (coin 2 = coin 1 value). The OFF setting can be

selected if the coin #2 input is not used.

5- MONEY PROMPT This option tells the player the type of money accepted. The

options are: COINS, TOKENS, SWIPE CARD, INSERT CARD. The default setting

is SWIPE CARD.

6- WARM UP JUMP COUNT This sets the number of warm up jumps a player gets

before the game can end. The range is 1 – 9 (Default setting is “7”)

7- STATION ID This option is used to identify more than one game. The range is 0 – 1

(default setting = 1). Zero identifies the master (or standalone) unit and one

identifies the slave unit. Up to two games can be connected together.

IMPORTANT NOTE: no two games should be set to the same STATION ID.

JUMPIN’ JACKPOTOperators Manual

8- MINIMUM TICKETS This sets the minimum number of tickets a player will receive

regardless of their performance. The range is 0 – 25 tickets (Default setting is“10")

9- AVERAGE TICKETS PER PLAY This sets the average number of tickets a player

will receive per game played. The range is 0-100 (Default setting is“35") NOTE:

The player will receive a proportional amount of tickets between the “MINIMUM

TICKETS” and the “AVERAGE TICKETS PER PLAY” settings, based upon the

percentage of completion.

10- BONUS VALUE This sets the bonus value for winning the game. Possible bonus

values are common numbers between 0-2000 (Default setting is“1000")

11- TICKET MULTIPLIER This sets the multiple value of you ticket. Use this setting

when your ticket value is 2x.(Default setting is“1" = standard 1x tickets)

12- DIFFICULTY This option sets how skilled a player needs to be to win the game.

The rangeis“AUTO”, 1 – 8 (default = AUTO). The auto setting isrecommended,

and attempts to accommodate a wide range of skill levels. Manual settings between

“1” (easy) to “8” (hard) are the fixed difficulty choices.

13- AUDIO ATTRACT INTERVAL This sets how often music will play when the game

sits idle. The value set equals the number of minutes. The range is 0-15 (Default

setting is“5")

14- RES DEF (RESET DEFAULTS) When this isset to “1" and you exit the menu

screen, allof the game settings will be restored to their default value. (Default

setting is“0")

15- LAMP/SWITCH TEST This option doesn’t affect game operation, but provides an

operator the a way to test allLEDand switch inputs. When the jump zone, isclear,

the game will repeat the sequence red, green and blue on the light ring. Ifany of the

floor mat switches are pressed, the corresponding 15 the lower center tubes will

light red. In this mode, the coin inputs can also be tested (sound will be played, but

ignored by normal game functions.

16- BONUS WIN COUNTS This option doesn’t affect game operation, and only

displays the win counters. The format is: XXXXXXXXXXXXXXXX. The first (left

most) pairof digits represent difficulty 1 wins. The second pair are difficulty 2 wins

and continue to the last pair, difficulty 8 wins. For each pair of digits, the left digit are

the single rope wins and the right digit are the double dutch wins. Each digit has a

range of 0-9.Much like coin counters, these counters can’t be reset and operators

will need to subtract starting from ending values to determine the wins during a

period of time. These win counts have little value when operating the game using

auto difficulty, but can be used to help guide manual difficulty settings.

6.0 ERROR MESSAGES

MASTER UNIT NOTDETECTED This error message will be displayed on all slave

games (STATION ID= 1) when no master game is connected and running. Ifthis

message is displayed and all games are powered up and connected, Enter the options

mode on each game, and make sure only one game is setto STATION ID= 0.

CONNECT MAT. This error will be displayed when the main logic PCB can not

communicate with the floor mat. Inspect the floor mat wiring for any disconnection or

breakage. Reconnect or repair any broken cables. If all checks out, the floor mat may

need to be serviced.

ONE PLAYER AT A TIME! Please clear all objects from the JUMP ZONE! This error will

be displayed when an object stays in the Jump zone for over 1 minute. Clear the object

and the game will automatically return to normal operation. If nothing is on the Jump zone,

make sure there is nothing under the mat and the floor is smooth and flat. If everything

checks out, and the error message persists, the floor mat may need to be serviced.

7.0 DIAGNOSTICS

On every power up, the game will perform internal tests. If everything checks out, the

video and main logic software versions will be displayed. Refer to section 6.0 Error

messages if any problem is displayed.

8.0 GAME PLAY

A player inserts the required money, then selects either classic or double dutch play.

When the game starts the player must jump the virtual jump rope as it spins around. The

longer the player successfully jumps the more the progress bar fills up . When the

progress bar is full, the player wins the bonus!

Inhaltsverzeichnis

Andere Bandai Namco Arcade-Spielautomat Handbücher

Bandai Namco

Bandai Namco DC HEROES vs. VILLIANS AIR HOCKEY Bedienungsanleitung

Bandai Namco

Bandai Namco MAXIMUM TUNE 5DX PLUS Bedienungsanleitung

Bandai Namco

Bandai Namco DARK ESCAPE 4D Bedienungsanleitung

Bandai Namco

Bandai Namco Tokyo Revengers Tamagotchi Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN'S PIXEL BASH Bedienungsanleitung

Bandai Namco

Bandai Namco TANK! TANK! TANK! Bedienungsanleitung

Bandai Namco

Bandai Namco COSMODOG JUKEBOX BOWL-O-RAMA Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN POWER PELLETS Bedienungsanleitung

Bandai Namco

Bandai Namco DEAD HEAT UNLEASHED Bedienungsanleitung

Bandai Namco

Bandai Namco Time Crisis 5 Bedienungsanleitung

Bandai Namco

Bandai Namco GALAGA ASSAULT Bedienungsanleitung

Bandai Namco

Bandai Namco World's Largest Pac-Man Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung

CA RING TOSS Bedienungsanleitung