Bang & Olufsen BeoVision 1 LS Bedienungsanleitung

BeoVision 1 (Update), BeoVision 1 LS

BeoCenter 1

Type 861x, 865x

Type 85xx

On-site service guide

English, German, French, Italian, Spanish, Danish, Dutch

This On-site service guide must be

returned with the defective parts/

back-up suitcase !

ABO-CENTER v/HENRIKSENS ELEKTRONIK

Contents

1.1 Brief Operation Guide

2.1 English

3.1 Deutsch

4.1 Français

5.1 Italiano

6.1 Español

7.1 Dansk

8.1 Nederlands

9.1 Illustrations

10.1 Disassembly/Assembly

11.1 Main chassis in serviceposition

12.1 Replacement of main chassis

13.1 Replacement of PCB10 (BV1) / Sound/DVD chassis (BC1)

14.1 Replacement of other modules

15.1 Survey of modules

Caution:

Do not under any circumstances, place the BeoVision 1/BeoCenter 1 lying

on the contrast screen.

Instead, place it as illustrated below.

ABO-CENTER v/HENRIKSENS ELEKTRONIK

1.1

Brief Operation Guide

#1 Brief operation guide

For further information regarding daily use, please refer to the user’s Guide and

Reference book.

Beo1 button functions

- mpPress to step up an down through choices; in on-screen menus, press mto

back up through menus and sub-menus.

- lnPress to move left and right through choices.

- GO Press to switch on the BeoVision 1 television; accept, start, select, and store-

press GO to execute your choice; press and hold GO to call up a program list

of available programs.

- DISPLAY Press to open the small display window on the television screen, for

access to all sources and functions; press to exit a function or menu.

- ruPress to adjust volume up or down; press both to mute/demute the sound.

- •Press to turn the system off- standby.

On the back of the Beo1

- REC Press to access the record function directly, if a BeoCord V8000 video recorder

is connected.

- STOP Press to stop a recording or stop playback completely.

Following is a brief survey of the menu system in the BeoVision 1. In the menu,

use the grey line in the bottom of the screen, providing information on which

buttons to use.

- To enter the menu see 1. For SAT SETUP, enter the menu from SAT instead of TV.

- For use of Teletext see 2.

R L VIDEO

Close-up operation and socket

panel

Mains

switch Phones

TEXT SETUP

DISPLAY

SETUP

TV GROUPS

TEXT

TV GROUPS

MEMO1

PAGE

100

POINT

Select text

Step 100 pages

Step 1 page

MEMO1

PAGE

100

POINT

MEMO1

PAGE

100

RETURN

Return with GO

Navigate,

select with GO

PAGE

100

Select memopage,

store with GO

Select with GO

234

Exit setu

, with GO

9BACK

SETUP

HALT

STOP

Delete with 2 x STOP

(GO) STORE

LOAD (Beocenter 1)

ABO-CENTER v/HENRIKSENS ELEKTRONIK

1.2 Brief Operation Guide

PLAY TIMER

store GO

TIMER OFF

EDIT TV PROGRAM

1 DR1

2 TV2

FILM

GROUP2

. . .

PROGRAM GROUPS

name move/delete

create group GO

TV 2

FILM

add move/delete

EDIT PROGRAMS

ADD PROGRAM

AUTO TUNING

MANUAL TUNING

LINK FREQUENCY

FREQUENCY

PROGRAM NUMBER

TV TUNING

back select GO

ADD TV PROGRAM

15 SAT 1

16 SVT 2

17 NRK

18 TV4

19 . . . . . . . .

start

TV AUTO TUNING

1 . . . . . . . .

start

1 DR2 DR2

2 TV2 SKY NEWS

3 . . . . . . . . ZDF

4 EUROSPORT RADIO 2

5 ZDF BBC

6 ARD

7 . . . . . . . .

COPY TV TO MY GROUP

copy

accept GO

FINE TUNE 0

DECODER NO

SOUND STEREO

TV MANUAL TUNING

accept GO

SEARCH . . .

FREQUENCY 210

PROGRAM NUMBER 1

NAME DR1

EXTRA

TV MANUAL TUNING

select GO

left right

store GO

STAND POSITIONS

CONNECTIONS

DISPLAY SEQUENCE

MENU LANGUAGE

TV ON

TV STANDBY

OPTIONS

back select GO

TV ON

TV STANDBY

STAND POSTIONS

FORMAT 4:3

FORMAT 16:9

PICTURE FORMAT

select GO

PROGRAM GROUPS

TUNING

PICTURE FORMAT

OPTIONS

STAND POSITIONS

CONNECTIONS

DISPLAY SEQUENCE

TV SETUP

back select GO GO

CONNECTIONS

store GO

V. TAPE V. TAPE

AV NONE

move

store GO

SAT

TEXT

TURN

SETUP

GROUPS

DISPLAY SEQUENCE

ENGLISH

DEUTSCH

FRANCAIS

ITALIANO

MENU LANGUAGE

select accept GO

TUNING

PLAY TIMER

STAND POSITIONS

CONNECTIONS

MENU LANGUAGE

EDIT PROGRAMS

ADD PROGRAMS

AUTO TUNING

TV SETUP

back select GO

name move/delete

FREQUENCY 599

FINE TUNE 0

TV SYSTEM B/G

LINK FREQUENCY

store GO

Only in BeoVision 1 LS

MENU LANGUAGE

CONNECTIONS

STAND POSITIONS

TV TUNING

BeoVision 1 (Update)

BeoCenter 1

BeoVision 1 LS

ABO-CENTER v/HENRIKSENS ELEKTRONIK

2.1

Contents, English

#1 Introduction

#2 Repair of BeoVision 1

#3 Fault ﬂow chart

#4 Removal of the cloth front

#5 Removal of the contrast screen and cleaning the BeoVision 1

#6 Adjustments after replacement of main chassis

#7 Check after replacement of main chassis or modules

9.1 Illustrations

10.1 Disassembly/Assembly

11.1 Main chassis in serviceposition

12.1 Replacement of main chassis

13.1 Replacement of PCB10 (BV1) / Sound/DVD chassis (BC1)

14.1 Replacement of other modules

15.1 Survey of modules

Survey of symbols:

Make a shortcircuit between the marked points, usually for discharging

e.g. a picture tube

Push with ﬁnger, in arrow direction

Disconnect internal plug

Connect internal plug

Disconnect mains plug

Connect mains plug

Disconnect aeriel or other external plug

Connect aeriel or other external plug

Loosen/remove or fasten/install screw

Dashed arrow. Push/pull e.g. PCB, chassis etc. in arrow’s direction

Filled arrow. Refer to page/chapter for more information, e.g. 14.1 PCB20,

if mounted:

Turn to 14.1 PCB20 and remove or install PCB if such is mounted

ABO-CENTER v/HENRIKSENS ELEKTRONIK

2.2

Warning

Static electricity may destroy the product!

A static-protective ﬁeld service kit must always be used when replacecement of the

modules takes place. Follow the instructions in the guide and use the ESD mat

area for both the new and old modules.

Please note:

When mains voltage on the TV is required, remove the connection from the TV to

the ESD mat.

#1 Introduction

This On-site service guide explains how to service the BeoVision 1 by replacing the

modules. In the following you will ﬁnd repair tips, description of how to replace the

different parts and a description of how to adjust after servicing.

When the following symbol occurs; ➢it is a cross-reference to a photo or an

illustration in the back of this On-site service guide.

For example; ..the two screws A (see ➢2). This would refer to the placement of

the screws marked with an A at the photo/illustration called ➢2.

The chapters in the On-site service guide are named for example #2 Repair of

BeoVision 1. They are listed numerically.

Please note:

This On-Site Service guide must always be returned with the defective parts.

#2 Repair of BeoVision 1

Before troubleshooting is initiated, let the customer explain and demonstrate the

fault, if possible.

Afterwards, check:

- that all cables are plugged in correctly

- that the mains voltage is connected, and switched on

- that an aerial signal is connected

- that all external sources such as VTR, DVD etc. are connected correctly and

switched on. Use the enclosed IR-blaster if necessary in order to check IR-signals to

the external sources.

When troubleshooting is initiated, please refer to #3 Fault ﬂow chart. The fault

should ﬁt into one of the 5 main groups.

- System functionality

- DVD/CD (BC1) / Camcorder

- Picture

- Sound

- Satellite (only if a satellite module is mounted)

Introduction, English

STATIC ELECTRICITY

MAY DESTROY THE

PRODUCT

ABO-CENTER v/HENRIKSENS ELEKTRONIK

2.3

Introduction, English

Follow the arrows from each box, answering YES or NO, to locate the fault. The

back cover may have to be removed and the main chassis placed in service position.

See 10.1 Disassembly of BeoVision 1 and 11.1 Main chassis in service position for

further information.

If measurements are needed, please refer to the chapter measurements, placed

behind #3 Fault ﬂow chart.

When a voltage speciﬁcation is given in the fault ﬂow chart, a value within ±10-20%

of this is OK.

If nothing else is mentioned, the fault ﬂow chart applies for both BeoVision 1 (BV1)

and BeoCenter 1 (BC1).

When replacing a module, remember to disconnect the mains voltage. Carry out

the replacement, and reconnect the mains voltage. Then check if the fault is

rectiﬁed.

If replacing the main chassis remember to transfer optional modules, such as

Satellite, STB-Controller etc. to the new main chassis.

For information regarding operation of BeoVision 1, see Brief operation guide.

After repair of BeoVision 1, always remember to follow #6 Adjustments after

replacement of main chassis and/or #7 Check after replacement of main chassis or

modules.

Important note concerning theft protection, if activated:

Before servicing the product, please ask the customer to deactivate the theft

protection, if possible.

- If the theft protection is active during service, please note that exchanged modules

must always be returned to Bang & Olufsen for service. The exchanged modules

will immediately, after mains on, be registred to this product and this registration

can only be changed at Bang & Olufsen, Struer DK.

- If the back-up suitcase is not being returned to Bang & Olufsen after use, but

reﬁlled by e.g. the dealer or workshop with new modules, please read the following

instruction.

When exchanging modules to see whether they are defective or not, it is important

to use the Service code, to avoid registration of the modules for this speciﬁc product.

...When the TV is turned on, use Service code, pressing lfor 3 seconds.

A Mastercode menu appears, and the Service code, which is 11111, must be

entered.

It is then possible to exchange modules to see whether they are defective or not.

If not, the registration of the module will not take place until for 12 hours, time

enough to replace with the old module again.

ABO-CENTER v/HENRIKSENS ELEKTRONIK

2.4

Remote Control

Try with a new

Beo1

OK?

Replace main

chassis

OK?

Replace PCB11/

PCB58 (BC1)

Replace batteries in

old Beo1

OK?

Replace Beo1

module

No standby light

Check mains

voltage. Check if

mains switch on

BV1 is on

OK?

Turn on mains

voltage or turn

mains switch on

BV1 on

Replace main

chassis

OK?

Replace PCB11/

PCB58 (BC1)

Stand function

Check settings of

stand

OK?

Change to correct

settings

Replace PCB80

OK?

Replace main

chassis

System-

functionality

Fault ﬂow chart, English

#3 Fault ﬂow chart

Yes

ABO-CENTER v/HENRIKSENS ELEKTRONIK

2.5

Fault ﬂow chart, English

DVD/CD

(BeoCenter1 only)

Camcorder

Fault on DVD

picture and/or

sound

Replace

sound/DVD

chassis

OK?

Replace main

chassis

OK?

The TV should be

taken to a

workshop for repair

No eject/load of

DVD/CD

Touch LOAD and

measure approx.

0V DC between

1P10p14 and 1P8

(GND) when load

OK?

Replace PCB58

Replace

sound/DVD

chassis

OK?

Replace main

chassis

OK?

The TV should be

taken to a

workshop for repair

No playback of

DVD/CD

Measure approx.

5V DC between

72P100p7 and

72P100p5

OK?

Replace main

chassis

OK?

Replace

sound/DVD

chassis

OK?

Replace

sound/DVD

chassis

OK?

The TV should be

taken to a

workshop for repair

No camcorder

sound and/or

picture

Check connections

to camcorder

OK?

Replace the

defective

connection

Replace PCB11/

PCB58 (BC1)

OK?

Replace main

chassis

OK?

Replace sound/DVD

chassis (BC1) or

bring the TV to a

workshop for repair

Yes

Replace main

chassis

OK?

ABO-CENTER v/HENRIKSENS ELEKTRONIK

2.62.6 Fault ﬂow chart, English

Yes

Can focus be

adjusted on focus

potentiometer until

OK?

Poor focus

Adjust BV1 by

means of

adjustment guide

OK?

Replace main

chassis

Readjust focus

OK?

The TV should be

taken to a

workshop for

repair

Picture tube may

be defective

Leave BV1 on for

10 min. If error

reoccurs, replace

main chassis

OK?

Can picture be

obtained by

adjusting

G2-potentiometer?

No picture

Adjust BV1 by

means of

adjustment guide

OK?

Replace main

chassis

OK?

The TV should be

taken to a

workshop for repair

Picture tube may

be defective

Leave BV1 on for

10 min. If error

reoccurs, replace

main chassis

OK?

Change to correct

settings

Check colour

settings in service

mode

OK?

No colour(s)

Replace main

chassis

OK?

The TV should be

taken to a

servicecenter for

repair

Picture tube may be

defective

Picture

Check aerial connection

ABO-CENTER v/HENRIKSENS ELEKTRONIK

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Bang & Olufsen Fernseher Handbücher

Bang & Olufsen

Bang & Olufsen BeoVision L 2502 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision12 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoSystem 3 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision MX 4200 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoCenter AV5 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen beovision 14-55 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 6 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 7 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision Avant Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 3 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision MX 4002 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision Avant-55 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 11-40 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision Horizon-40 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoPlay V1-32 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision?10-32 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 4 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEOPLAY V1 Series Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision MX 8000 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 3 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoPlay V1 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoCenter 1 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 6 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BeoVision 6 Produkthandbuch

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Philips

Philips Colour Television Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung