Baofeng BF-888S Bedienungsanleitung

Walkie Talkie

Model: BF-888s

THANK YOU!

We are grateful for your choice of our transceiver. We believe that this

easy-to-use transceiver will provide dependable and cost-effective

communications for you.

Our professional two-way radios incorporate the latest in advanced

technology and craft. So you will be pleased with the quality and features

of our products. Please read this manual carefully to ensure you know how

to properly operate the radio before use.

PRECAUTIONS

1. Refer service to qualified technicians only.

2. Do not disassemble or modify the transceiver for any reason.

3. Do not expose the transceiver under direct sunlight long time or to

extremely hot condition.

4. Do not place the transceiver on the unstable surface.

5. Keep the transceiver out of dust, moisture, and water.

6.Do not operate the transceiver or charge the battery pack under explosive

conditions.

SAFETY:

It is important that the operator is aware of and understands hazards

common to the operation of any transceiver.

WARNING

Please Turn the Transceiver Power off in the Following Locations:

* In explosive atmospheres (inflammable gas, dust particles, metallic

powders, grain powders, etc.).

* While taking on fuel or while parking at gasoline services stations.

* Near explosives or blasting sites.

* In medical institutions or aircrafts.

UNPACKINGAND CHECKING EQUIPMENTS

Carefully unpack the transceiver. We recommend that you identify the

items listed in the following table before discarding the packing material.

If any items are missing or have been damaged during shipment, please

contact the dealers immediately.

SUPPLIED ACCESSORIES

Item Name Quantity

Antenna

Handstrap

Charger

Battery

Belt Clip

User’s Manual

CHARGING THE LI-ION BATTERY PACK

Please charge the new battery pack before using it.

The new or stored (more than two months) battery pack, which can not

reach its full capacity for the first charging. After 2 or 3 times charging

and discharging, it can reach full charge.

Just see the following instructions:

1. Plug the adapter into an electric socket.

2. Insert the transceiver or battery into the drop-in charging tray.

3. Ensure that the battery’s contacts connect with the drop-in charging

tray properly, while the charging is taking place, the light will glow

red.

4. After 3 hours charging, the LED indicator will light green which

means the full charge. Now remove the battery or the transceiver from

the drop-in charging tray.

NOTE:Do not recharge the battery pack if it is fully charged. Doing so

may cause the life of the battery pack to shorten or the battery pack may be

damaged.

INSTALLING/REMOVING THE BATTERY PACK

The usage time of JL-11 Battery Pack is about 8 hours, which is based

upon 5% transmit/5% receive/90% standby (standard duty cycle). See

following images:

CAUTION:

1.Do not short-circuit the terminals of the battery or throw the battery into

the fire.

2.Do not disassemble the battery pack yourself.

INSTALLING THE ANTENNA

Screw the antenna into the connector on the top of the transceiver by

holding the antenna at its base and turning it clockwise until secure.

NOTE:

The antenna is neither a handle, a key ring retainer, nor a speaker,

microphone attachment point. Using the antenna in these ways may

damage the antenna and degrade your transceiver’s performance.

INSTALLING THE BELT CLIP

If necessary, install the belt clip into the location on the back of the battery.

(See Figure)

NOTE:

If the belt clip is not installed, its mounting location may get hot during

continuous transmission or under heated environment.

INSTALLING THE (OPTIONAL) SPEAKER/MICROPHONE

Insert the speaker/microphone plugs into the speaker/microphone jacks of

the transceiver.

NOTE:The transceiver is not fully water resistant when using

speaker/microphone.

GETTINGACQUAINTED

A. Led Indicator-- The LED indicator lights continuously red when

transmitting. And lights green when in reception condition.

B. Channel Switch—Rotate it to select the channel. No.16 channel is

scanning channel.

C. POWER SWITCH/VOLUME CONTROL

Turn clockwise to switch ON the transceiver.

Turn counterclockwise fully to switch OFF the transceiver. Rotate to

adjust the volume.

D. PTT (PUSH-TO-TALK) BUTTON

Press this button, then speak into the microphone to call a station.

Release to receive a call.

E. MONITOR BUTTON

Press and hold (Squelch OFF) to hear the background noise; Release to

return to normal operation.

F. FUNCTION KEY—Just press to activate the torch function.

G. SPEAKER/MICROPHONE JACKS

OPERATION

SWITCHING POWER ON/OFF

Turn the power switch/volume control clockwise. You will hear a beep and

speech, indicating the transceiver is ON.

ADJUSTING THE VOLUME

Hold Monitor button down to listen to audio level while rotating the Power

switch/Volume control. Rotate clockwise to increase and counterclockwise

to decrease volume.

SELECTING THE CHANNEL

Turn the channel switch to select your desired channel. NO.16 is Scanning

Channel.

TRANSMITTING

1.To transmit, press and hold [ PTT ] and speak into the microphone in

your normal tone of voice.

The LED indicator lights continuously red when transmitting.

To maximize sound clarity at the receiving station, hold the transceiver 2

to 3 inches from mouth and talk in normal tone of voice.

2.Release [ PTT ] to receive.

Andere Handbücher für BF-888S

Inhaltsverzeichnis

Andere Baofeng Zwei-Wege-Funkgerät Handbücher

Baofeng

Baofeng Pofung UV-5R Bedienungsanleitung

Baofeng

Baofeng DM-5R Bedienungsanleitung

Baofeng

Baofeng UV-5R Series Betriebsanleitung

Baofeng

Baofeng UV-3R Mark II Service-Handbuch

Baofeng

Baofeng UV-5R Series Betriebsanleitung

Baofeng

Baofeng BF-P618 Bedienungsanleitung

Baofeng

Baofeng UV-5R EX Bedienungsanleitung

Baofeng

Baofeng DMR-5R Bedienungsanleitung

Baofeng

Baofeng UV-5R Series Bedienungsanleitung

Baofeng

Baofeng UV-82HP Bedienungsanleitung

Baofeng

Baofeng BF-UV5R Betriebsanleitung

Baofeng

Baofeng DM-V1 Betriebsanleitung

Baofeng

Baofeng DM-1701 Bedienungsanleitung

Baofeng

Baofeng BF-888S Bedienungsanleitung

Baofeng

Baofeng UV-5R Plus Gebrauchsanweisung

Baofeng

Baofeng BF-F8HP Bedienungsanleitung

Baofeng

Baofeng BF-T8 Bedienungsanleitung

Baofeng

Baofeng BF-T12 Bedienungsanleitung

Baofeng

Baofeng UV-82HP Bedienungsanleitung

Baofeng

Baofeng UV-85 Bedienungsanleitung

Baofeng

Baofeng UV-5G PLUS Bedienungsanleitung

Baofeng

Baofeng GT-18 Bedienungsanleitung

Baofeng

Baofeng UV-3R Bedienungsanleitung

Baofeng

Baofeng UV-6 Montageanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung