Baofeng DM-1701 Bedienungsanleitung

To users:

Thank you for your favor with our products.

We are dedicated to providing high performance and high stability radio communication products. This two-way

radio is no exception. The radio is a DMR dual-slot digital walkie-talkie developed and produced by my team with

3000 memory channels, full-color LCD display and full keyboard hand-tuning function. In order to make you fully

understand the various advantages of the radio performance and use and maintenance methods, please read

this manual carefully.

Main Features

Broadband walkie talkie

Support UV double segment, frequency range UHF400.000-480.000MHz / VHF136.000-174.000MHz

DMO True2-Slot dual time slot

Direct mode dual-slot communication achieves two groups of calls at a frequency point at the same time, so

that the communication efficiency is doubled and frequency resources are saved

Digital and analog compatible, smooth over

Support DMR digital and analog two communication modes to ensure that the original analog products

smooth transition to digital products to meet different communication needs

Digital signaling function

Rich calling modes that support DMR protocol, including single call, group call and all call; supports remote

inhibit function and other applications

SMS function

Supports SMS, text editing and draft in 64 characters in Chinese and English, so that text messages calls can

be sent when voice call is inconvenient

High sound quality

This digital two-way radio uses advanced AMBE +2TM voice processing technology to achieve high quality

Manual writing-frequency

Supports channel / frequency mode, allows manual writing-frequency in frequency mode, and

writing-frequency software can be used to set the required frequency without connecting the computer

High/low power switch

Meets the power requirements of different call distances to save more energy

Alarm function

Supports general alarm and silent alarm in emergency situations

Digital mode supports the use of relays

Side buttons can be customized without changing the user’s operating habits

Contents

1. Familiar with this machine------ 4

Key introduction----- 4

Programmable key -------5

2. Safety and Overview------4

Handheld walkie-talkies product safety and radio frequency radiation 4

3. Preparation before use------- 4

Charging -----4

Attachment Installation -------5

Status indication --------4

4. Basic Operations Making and Receiving Calls ---------5

Turn on the walkie talkie --------4

Volume adjustment --------5

Area Selection-------- 5

Select walkie talkie channel, user ID, call group ID --------6

Receive and reply group call --------6

Receive and reply single call----------6

Receive all call --------------7

Start a walkie - talkie call-------------8

Use the channel knob to place a call ------------8

Initiate group call --------------8

Start a single call --------------9

Initiate all call ---------------------9

Use one-touch call button to initiate group call or single call --------------10

5. Emergency alarm function -------------------10

Receive emergency alert ----------------11

Reply to emergency alert -------------------------------12

Send emergency alert ---------------------------12

Send emergency alert with call ------------------------13

Send an emergency alert with voice following-------------- 14

Restart emergency mode --------------15

Exit emergency mode

6. Menu Function Operation -------------------15

Menu navigation --------------------------15

Character input------------------------------ 15

English alphabet pattern: ----------------------16

Pinyin input mode: ------------------------17

Digital Input Mode: --------------------------17

How to use the menu--------------18

walkie talkie detection ------------------18

Send walkie-talkie detection ------------------18

Remote monitoring --------------------19

Start remote monitoring---------------19

Address book settings --------------------------20

Initiated by the address book group call ------------------21

Initiated by address book -----------------------21

Call record function ----------------------22

Check out the latest call number-------------22

Missed call screen ----------------23

Stores the alias or ID in the missed call list --------------------23

Delete the call in the call list -----------------------24

Call prompt operation ----------------------------24

Receive and confirm call alert --------------------------24

Initiate a call from the communication list----------------25

SMS function--------------25

Edit and send SMS ------------------25

Send pre-sent text messages-----------------26

Send SMS using the one-touch call button --------------------27

Manage sending failed messages ---------------27

Manage sent SMS -----------------29

Receive SMS ----------------------31

View SMS ----------------------32

Manage Received SMS --------------------32

Check your inbox SMS -----------------------33

Reply to inbox message -------------------------33

Delete messages in your inbox--------------34

Delete all messages in your inbox--------------34

Encryption ----------------------35

Basic encryption --------------------35

Dual tone multi frequency (DTMF) ----------------------36

Confidentiality ----------------------36

Walkie talkie remote kill -----------------------36

Walkie talkie activated --------------------37

Scan list --------------------37

View the members in the scan list ------------------38

Scanning instructions and methods ------------------------38

Start and stop scanning -------------------------------39

Press preprogrammed on / off key or enter scan menu function ---------------39

Scan reply--------------------- 39

7. Set --------40

Walkie talkie settings --------------------40

Offline --------------41

Walkie talkie Tone / Hint ------------41

Mute all -------------------42

Turn on or off keyboard sound ----------------42

Set power level ----------------43

Control the screen backlight -------------------43

Set noise reduction level --------------44

Open or close the boot screen ----------------------45

Lock the key and unlock the key -----------------------45

Language Selection -----------------46

Turn LED on or off----------------46

Turn VOX function on or off ---------------47

Power on password ----------------48

Clock -----------------48

Time -----------------49

Date -------------------49

Mode ---------------------50

Access general walkie talkie information-----------------------50

Check walkie talkie ID --------------------51

Walkie Talkie version --------------------51

walkie talkie configuration ---------------51

Reception frequency --------------------52

Launch frequency -----------------52

Channel name --------------53

Time-out timer -------------54

CTCSS --------------54

CTCSS code ------54

CTCSS decoding -------55

Color code ---------------56

Relay station slot ---------------------56

1. Familiar with this Product

■Description of Buttons

[PTT]Transmit button

Switch between transmission and reception; when transmitting, press this button and speak to the

microphone; release the button to receive.

Side button 1

* Defaults to Up and down screen

switch

Short press this button to quickly switch the upper and lower screen.

Press and hold it to enter the alarm mode, press and hold it again or press briefly to exit the alarm mode. If

the current channel is digital and no alarm system is configured, the alarm function can’t be started.

Side button 2

* The default is to select the

channel up

Short press shortcut select channel up.

Press and hold it to turn on the monitor function (only support analog channels).

Side button 3

* The default is to select the

channel down

Short press shortcut select channel down.

Long press for the power switch, select the high and low power.

0-9 number buttons

Default: 0~9

[0~9] code words in DTMF function

Select punctuation marks or letters in Pinyin input method.

If numeric shortcut function is set, you can press and hold this button to jump to the corresponding contact.

[MENU] button

Press it to activate the menu mode, enter the menu and press this button to select menu items.

Press and hold it to enter the radio settings.

[]button

Move up; change the scanning direction in scanning state.

Move left in SMS editing interface.

[]button

Move down; change the scanning direction in scanning state.

Move right in SMS editing interface.

[Exit]/[Clear] button

Clear the entered information in input state.

Press and hold this button to switch channel mode or frequency mode.

[*]button

Press and hold this button to lock on / off keyboard

Code word * in DTMF function

[#]button

Switch the input method in input method interface.

Code word # in DTMF function

■Programmable Buttons

In order to improve the operational convenience, the function shortcut keys provided by this product are 【SK1】key, 【SK2】key,

【SK3】key, 【P1】key and 【P2】key. For the specific function, please consult the distributor. For the detailed description of each

function, please refer to the corresponding contents of "Function and Operation".

No.

Shortcut name

Purpose

None

No function is assigned to the preset button.

All prompt tone

on/off

Quickly enable or disable all prompt tones at the same time.

Emergency mode

Quickly establish an emergency call. This is the recommended option for the orange button.

Emergency mode

off

Quickly end an emergency call initiated outward.

Select high/low

power

Quickly switch between high power and low power.

Monitor

Quickly turn on or off the monitor function.

Push to talk 1

Quickly make digital group calls, digital single call, call prompts, or send text messages (only for digital mode) via

push to talk. (This option is only available if the digital function is enabled on the device.) Push-to-talk 1 to

push-to-talk 6 can be set.

Relay / offline

Quickly switch between relay mode and offline mode.

Scan on / off

Quickly turn the scan function on or off. Note: double-segment double-waiting scan does not work

Strict/normal

squelch

Quickly switch between strict squelch and normal squelch (only for analog mode).

Encryption on/off

Quickly turn on/off encryption for channel (only for digital mode).

Voice control on/off

Quickly turn on or off the voice control function.

Area switching

Quickly select the area, allowing the user to switch between two areas.

Battery power

indication

Quickly access to battery power. The user can check the battery status by LED. The battery power is sufficient if

the LED is constantly in green, the battery power is still available if the LED is constantly in yellow, and the battery

power is low if the LED is in red.

Individual

operation switch

Quickly turn on or off individual operation function.

Recording switch

(Based on firmware) to quickly turn on/off the recording

Record playback

(Based on firmware) to quickly playback of recordings

Delete all the

recordings

(Based on firmware) to quickly delete all recordings

1750Hz

Fast launch 1750 pilot signal

Up and down

screen switch

Quickly switch the upper and lower screen

Left key

Right key

Note:

●The same button short press and long press can achieve different functions, specific by the dealer settings.

2. Security and overview

RF radiation information

This product is intended for professional applications that meet RF radiation requirements. Users must be aware

of the hazards of RF radiation and take appropriate measures to meet the requirements of RF radiation limit.

Common sense in RF radiation

RF refers to the electromagnetic frequency that can be radiated into space. It is a technology widely used in the

fields of communication, medical treatment and food processing. It will produce some RF radiation during use.

Control and operating instructions of RF radiation

In order to maximize the performance of the product and to ensure compliance with the radiation limits in the

relevant occupational or controlled environment of the above criteria, the sending time shall not exceed 50% of

the rated factor and shall follow the instructions below:

• RF radiation is generated only during transmission (speech) rather than reception (listening) and standby.

• The distance between the terminal and the body during transmission should be at least 2.5 cm.

3. Preparation before use

Charging

Be sure to ensure that the product is off when charging. Battery into the charger may be charging red

flashing constantly flashing, this is the battery power is too low, the charger to protect the battery pre-charge

process, is a normal phenomenon, Generally continue for 30 seconds to turn the red light of the normal state of

charge.

Please use the charging seat specified by our company to charge the battery, the charging seat indicator shows

the charging status.

1. Plug the power adapter into a power outlet;

2. Plug the other end of the power adapter into the socket on the back of the charging cradle;

3. Insert the battery or the battery-equipped product into the charging cradle correctly; the indicator light on the

charging cradle shows the charging status. When the indicator light is red, it indicates the start of charging. When

the indicator turns green, the charging is completed. The specific table below.

Indicator display

Current charge status

Red light flashes

Battery power is too low

Red light

In charging

Green light

The charging is completed

Note:

For best battery performance, charge for a minimum of 4 hours on first charge.

■Battery information

●The first use of the battery

Since the battery is not fully charged at the factory, please charge the new battery before use. Under normal

circumstances, the battery when used for the first time, need to charge 4 hours, lithium-ion battery charging

using slow charge or fast charge can be performed when charging. It is recommended that the new battery be

operated as above for the first three uses. When you find the battery power is low, you need to charge the

battery.

●Suitable battery type

Please use the specified battery for charging; use of other batteries may cause explosion, resulting in human

injury.

●Battery safety attention

1. Do not allow metal contacts (including coins, keys, jewelry, or other conductive metal) to be touched by the

battery contacts or pole pieces. Otherwise, the battery may short circuit, discharge, heat or leak, which may

result in damage to the item or personal injury. Therefore, be careful when handling any battery.

2. Do not short-circuit the battery terminals or discard the battery in a fire. Do not disassemble the battery

pack. When the battery is discarded, please put into a dedicated battery recycling box.

●Battery normal operation instructions

★Please charge the battery indoors, battery charging at room temperature best.

★Under normal circumstances, the charger indicator from red to green when the battery is fully charged, at this

time the battery can be removed.

★You can charge when Battery installed in the walkie-talkie, but when charging is best to turn off the walkie

talkie, to ensure that the battery is fully charged.

★Please do not charge the battery when the battery power is not used up (after the battery is exhausted, the

voice prompt alarm will be given), which will shorten the service life of the battery.

★Do not put a fully charged battery back on the charger to "power up" again, as this operation significantly

reduces the cycle life of the battery.

●Extend battery life

★Battery performance will reduce below -20 ℃temperature conditions. Prepare back-up batteries for use in

colder weather. Please do not throw away cold batteries that cannot work. These batteries may be used at

room temperature.

★Dusting the battery contacts may affect the battery life. Please wipe the contacts with a clean, dry cloth before

inserting the batteries into the walkie-talkie.

●Battery storage needs to know

1.Since the battery will have a self-discharge phenomenon, the battery when not in use for a long time, please

fully charge the battery and then stored to avoid over-discharge of its battery to damage the battery.

2. When the battery is in storage, remove the battery to recharge when stored about 6 months. To avoid

over-discharge of electrolyte affect battery capacity.

3. Pay attention to the temperature and humidity of the battery storage environment. Store the battery at room

temperature in a cool, dry place to minimize self-discharge of the battery.

■Battery Voltage & Power Indication

If the dealer has set the 【battery power prompt】shortcut key for the product, you can press and hold the

shortcut key to check the remaining battery power by LED indicator, tone and battery icon. Release the shortcut

to cancel viewing the remaining battery power. The top right of the screen shows the current battery power icon

is as follows:

Battery icon

Battery power

High

Medium

Low

Insufficient

Inhaltsverzeichnis

Andere Baofeng Zwei-Wege-Funkgerät Handbücher

Baofeng

Baofeng UV-9G Bedienungsanleitung

Baofeng

Baofeng UV-5R Series Bedienungsanleitung

Baofeng

Baofeng UV-5R Series Bedienungsanleitung

Baofeng

Baofeng UV-5R Series Betriebsanleitung

Baofeng

Baofeng E88 Series Bedienungsanleitung

Baofeng

Baofeng UV-3R Mark II Service-Handbuch

Baofeng

Baofeng BF-88ST Bedienungsanleitung

Baofeng

Baofeng UV3RPLUS Bedienungsanleitung

Baofeng

Baofeng UV-85 Bedienungsanleitung

Baofeng

Baofeng DMR-5R Bedienungsanleitung

Baofeng

Baofeng BF-888S Bedienungsanleitung

Baofeng

Baofeng UV-3R Bedienungsanleitung

Baofeng

Baofeng PLUS Series Bedienungsanleitung

Baofeng

Baofeng MP25 Series Bedienungsanleitung

Baofeng

Baofeng DM-V1 Betriebsanleitung

Baofeng

Baofeng UV-3R Bedienungsanleitung

Baofeng

Baofeng UV-5RX3 Bedienungsanleitung

Baofeng

Baofeng GT-18 Bedienungsanleitung

Baofeng

Baofeng BF-F8TD Betriebsanleitung

Baofeng

Baofeng UV-82HP Bedienungsanleitung

Baofeng

Baofeng BF-UV5R Betriebsanleitung

Baofeng

Baofeng UV-82HP Bedienungsanleitung

Baofeng

Baofeng BF-88ST Bedienungsanleitung

Baofeng

Baofeng G11S Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung