Baofeng MP25 Series Bedienungsanleitung

MP25/BF-25A SERIES

FRS Two Way Radio

OWNER’S MANUAL

ATTENTION! The radio is a multitask FRS transceiver. Combining the latest technology in radio communication along

with a sturdy mechanical frame, the radio is the ideal and effective solution for the professionals who need to stay in

touch with the working team (in construction sites, buildings, shows, trade fairs or hotels) or for leisure users that just

want to keep up with friends and family.

To help you ward off bodily injury or property loss that may arise from improper operation, please read all the information

carefully before using our products.

Before operating the radio, please read all safety and operating instructions. Save all instructions in a

safe place for future reference.

FCC Part 15.21 Warning Statement

NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

Main features

• 22 FRS Channels • Output power: ≤2W (channels 1-7and 15-22)

• 12 NOAA Weather Channels • NOAA Weather Scan

• 2 Channels Watch • Privacy Codes Scan and Store

• Channel Monitor • Channel Scan Function

• 155 Privacy Codes (50 CTCSS codes/ 105 DCS codes) • 10 Selectable Call Alerts

• Hands-Free Operation (VOX) • Call Alert

• Roger Beep Tone • Keypad Lock

• Battery Level Meter • Emergency Strobe Light

• Battery/Power Saver • Backlit LCD Display

• Low Battery Audible Alert • TOT (Time out timer)

• 2pin Kenwood headset jack • Type-C USB connector for charging

• Li-Ion 1500mAh battery pack • Keystroke Tones

• Up to 5 km range* • Battery Life: up to 18 hours (under typical use conditions)

*Range may vary depending on environmental and/or topographical conditions.

Installation of Accessories

Installing and Removing Belt Clips

With the belt clip, you can easily attach the radio to the belt. However, the belt clip must be removed to install or replace the

battery.

To remove the belt clip, follow the illustration. Fasten the clip into the slot on the unit in the radio's rear rail until it snaps

into the square.

Install the Li-ion Battery (BL-T22)

Each radio operates with either a Li-ion battery pack or optional 3 AA

alkaline batteries. The belt clip should be removed (see below) to

ease installation or removal of the batteries.

• Install

1) Remove the belt clip as described in the previous paragraph.

2) Insert the battery pack into the appropriate compartment of the

device.

3) Close the battery compartment with the cover and put the belt

clip back in place

• Remove

1) Remove the belt clip as previously described.

2) Open the battery compartment as shown in the figure;

3) Remove the battery pack from the device;

4) Snap the belt clip back into place.

5) Close the battery compartment with the cover and put the belt clip back in place.

Install three AA Ni-MH Batteries (3 x AA, rechargeable)

Warning: Ni-MH batteries are rechargeable batteries and cannot be mixed with alkaline batteries.

1) Turn off the radio.

2) With the back of the radio facing you, lift up the battery cover latch, and then remove the battery cover.

3) As shown in the figure, insert three AA Ni-MH batteries with + and –polarity (wrong installation of the batteries will cause

the unit to fail or damage the unit).

4) Close the battery cover. Replace the belt clip and make sure it locks in place.

Installing the Three AA Alkaline Batteries (non-rechargeable)

Warning: Alkaline batteries can only be used in emergency situations and cannot be charged. There is a danger of

explosion when charging alkaline batteries.

1) Turn the radio off.

2) With the back of the radio facing you, lift the battery cover latch up and remove the cover.

3) Insert the three AA Alkaline batteries with + and –polarity as shown inside (Installing the batteries incorrectly will prevent

the unit from operating or may damage the unit).

4) Close the battery cover. Replace the belt clip, making sure it locks into place.

External Speaker/Microphone Jack

Each radio can be used with an optional external speaker/microphone or headset, freeing your hands for other tasks. To use

an optional speaker / microphone or headset:

1) Open the rubber cap on the side of the radio.

2) Insert the plug(s) into the SPK/MIC jacks.

3) Place the ear bud into your ear, and adjust the Microphone into your desired position.

Using a Headset

You can use a headset (#480_5R) for more private communications. To use a headset, lift the rubber cover from over the

headset jack, and then plug in the headset.

Important: Your radio is not submersible or waterproof when using a headset jack. When you remove the headset, be sure

to fully press the jack cover into place to restore its waterproof capability.

Charging the Battery

Charging the Radio

Two radios can be charged directly by using the supplied charging cradle. A single radio can charge using the Type-C USB port

to connect to a USB power source. For fastest charging, turn off the radio before charging.

Warning!

To avoid the risk of personal injury or property damage from fire or electrical shock, only use the accessories specifically

designated for this product. Using the Type-C USB Port

1) Connect the included AC adapter with Type-C USB connector cable to the radio's Type-C USB port. Connect the other end

to an outlet that provides USB charging power (NOT to a USB hub).

2) Charge the batteries for 6 hours until the battery indicator either stops flashing.

Using the Charging Cradle

1) Connect the included AC adapter with USB connector cable to the charging cradle's Type-C USB port. Connect the other

end to a standard AC wall outlet.

2) Set the charging cradle on the desk or tabletop, and place the radio in the charging cradle with the keypad facing forward.

3) Charge the batteries for 6 hours.

Note:

• Use only the supplied batteries, charger, and AC adapter or approved accessories.

• Charge time may vary depending on the battery life remaining.

• The batteries must be installed for the unit to operate, even if the unit is also connected to external power.

• If battery power is low, you cannot operate the radio even using external power. Allow the batteries to charge before using.

*If you try to transmit while power is low, the radio will automatically turn off.

Warning: Do not charge alkaline batteries. The radio will not be used for a long time, please take out and keep the

battery properly.

Using the Radio Battery Level and Low Battery Alert

This radio has a Battery Level Meter that shows the battery power level. The greater the number of bars visible, the

stronger the battery level. When the battery level is low, the Battery Shell icon will flash in the display indicating your

batteries should be replaced or recharged if using a rechargeable battery pack.

Warning! To avoid the risk of personal injury or property damage from fire or electrical shock, only use accessories

specifically designated for this product.

Main controls and parts of the radio

1. Antenna

2. LCD Display

3. UP button - Press to increase the volume. Menu

mode to change settings in MENU.

4. /MENU- Press this control to enter the radios MENU.

If you keep it pressed for about 3 seconds, the keypad

lock is activated.

5. /CALL - To send a call to the selected channel. keep

pressed to turn on/off the radio.

6. DOWN button - Press to reduce the volume. menu

mode to change settings in MENU.

7. Speaker and Built-in microphone

8. LED Flashlight

9. Breathing light

10. MONI button: Keep pressed to activate the Monitor function (for weak signal monitoring).

11. SPK | MIC (under the protective cover) - To connect to external audio devices such as microphones, headphones, etc

12. /SCAN button - Press this button once to activate SCAN.

13. USB port for the recharge of the radio

14. PTT button (Push-To-Talk)

15. LAMP/ Emergency button - When the radio is switched on, press shortly to turn on/off the LED flashlight. keep pressed to turn on/off the

emergency alerts.

LCD DISPLAY

Basic Operations

In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit.

Power on/off and volume adjustment

To turn the radio on, keep pressed the [/CALL] button.

To adjust the volume level as you prefer, press the [ ] or [ ] button.

In case the radio does not pick up any signal, activate momentarily the Monitor function that allows to detect also weak

signals. Then, adjust the volume to the desired level.

To turn the radio off, keep pressed the [ /CALL] button until a switch off tone is heard.

Keypad Lock

To avoid accidentally changing the radio settings, press the [ /MENU] button for 3 seconds. The icon will appear on the

display. [PTT], , [/CALL] and [MONI] keys will still be active. Repeat the same procedure to unlock the keypad.

1. NOAA Weather Band Indicator

2. Scan Indicator

3. Activate the VOX function

4. Dual Channel Monitor

5. Select the DCS/CTCSS type of squelch method

6. Channel (1-22)

7. Battery Indicator

8. Emergency alert function activated

9. Transmit Status

10. Receive Status

11. Keypad Lock

12.

Transmit power indicator. Low power only in PMR mode

13. Displays the set CTCSS tone or DCS code (CTCSS:

1-50; DCS: 1-105)

Talking on Your Radio

To talk to others using the radio:

1) Press and hold the [PTT] button and speak in a clear, normal voice about 2-3 inches away from the microphone. While you

are transmitting, the TXicon appears on the display. To avoid cutting off the first part of your transmission, pause

slightly after pressing the [PTT] button before you start talking.

2) When you have finished speaking, release the [PTT] button. You can now receive incoming calls. While receiving, RX

displays.

Monitor Mode Feature

Your radio allows you to listen for weak signals on the current channel at the press of a key. To turn ON Monitor mode: Press

and hold [ /MONI] for 2 seconds until two beeps sound. The receiver circuit stays open, and both noise and weak signals

can be heard. The RXicon blinks. To turn OFF Monitor mode: Press and hold [ /MONI] for 2 seconds to return to

"Normal" mode; two beeps sound and the RXicon stops blinking and disappears.

Channel Scanning

MP25/ T25 can automatically search for signals throughout the FRS bands by scanning, i.e. selecting the channels in rapid

sequence. When a signal is detected, the scanning pauses on that channel and you can transmit by pushing [PTT]. If you

press [PTT] during scanning you can transmit on the channel from which the scanning started. The scroll buttons [ ] or [ ]

allow you to change the direction of scanning (from lower channels to higher ones or vice versa) and therefore to skip

communications which are of no interest.

Press briefly the button [ /SCAN] to start scanning.

If you want to stop it, press again [ /SCAN]. Your transceiver will go back to the channel from which the scanning originally

started.

Scanning Sub-Codes

Press and hold [ /SCAN] button to enter the Sub-Codes scanning.

A flashing "CTC/DCS" will be in the left status display to indicate the radio is in Sub-Codes scanning mode.

In this mode, the lower display will cycle through the Sub-Codes as they are being tested. Once the bits of the received

Privacy code are determined, the "CTC/DCS" indicator will stop flashing.

Press the [PTT] button to save the scanned tone into memory.

During scanning, press and hold [/SCAN] button to exit Sub-Code scanning.

Using the Flashlight

You can use this radio in an emergency. If you press [ ] button, the radio turns on the high-intensity LED flashlight on your

radio.

• Your radio operates normally when the emergency strobe is activated.

1) Press [ ] button once, it will turn on continuously (Always On mode) .

2) And then, press [ ] button once, the Strobe Light emits the emergency signal. (Strobe emergency mode).

3) And then, press [ ] button once, the light will be turned off.

Emergency Alert

The Emergency Alert feature can be used to signal members in your group for help. The emergency alarm function is

activated by menu operation.

To activate the emergency alert function, press and hold the [ ] button for 3 seconds. The radio will send out a loud siren

sound and the flashlight will flash.

Press the [ ] button to exit the emergency alert function.

WARNING: The Emergency Alert feature should only be used in the even of an actual emergency.

Using the Weather Radio/Scan Weather Channel

Your radio has a NOAA Weather Radio function, to enable the user to receive weather reports from designated NOAA

stations. Your radio also has a NOAA Weather Scan function, to enable the user to scan all 12 channels of the NOAA Weather

Radio. While using the Weather Radio, you are not able to receive FRS communications.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Baofeng Zwei-Wege-Funkgerät Handbücher

Baofeng

Baofeng BF-F8HP Bedienungsanleitung

Baofeng

Baofeng BF-888S Bedienungsanleitung

Baofeng

Baofeng UV-17R Series Bedienungsanleitung

Baofeng

Baofeng BF-H6 Bedienungsanleitung

Baofeng

Baofeng UV-3R Bedienungsanleitung

Baofeng

Baofeng BF-5RA Bedienungsanleitung

Baofeng

Baofeng DM-5R Bedienungsanleitung

Baofeng

Baofeng BF-888S Bedienungsanleitung

Baofeng

Baofeng Pofung P10UV Series Bedienungsanleitung

Baofeng

Baofeng BF-88A Bedienungsanleitung

Baofeng

Baofeng DMR-5R Bedienungsanleitung

Baofeng

Baofeng BF-H6 Bedienungsanleitung

Baofeng

Baofeng UV-3R Bedienungsanleitung

Baofeng

Baofeng DM-V1 Betriebsanleitung

Baofeng

Baofeng UV-6 Montageanleitung

Baofeng

Baofeng UV-5R Plus Gebrauchsanweisung

Baofeng

Baofeng BF-P618 Bedienungsanleitung

Baofeng

Baofeng BF-88E Series Bedienungsanleitung

Baofeng

Baofeng UV-82HP Bedienungsanleitung

Baofeng

Baofeng UV3RPLUS Bedienungsanleitung

Baofeng

Baofeng BF-88ST Bedienungsanleitung

Baofeng

Baofeng E88 Series Bedienungsanleitung

Baofeng

Baofeng GT-18 Bedienungsanleitung

Baofeng

Baofeng GT-5R EU Series Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung