Baratza Maestro Installations- und Benutzerhandbuch

How to: Recalibration

Maestro, Maestro Plus, Encore, Virtuoso, Virtuoso+, Preciso

Time: 10 min

Difculty: Easy

Tools/supplies: Flat head screwdriver. #0 Phillips screwdriver

Parts: n/a

Additional Resources at baratza.com/troubleshooting: How to Troubleshoot a Grind Quality Issue

(video/PDF). Case Removal (Video/PDF). Adjustment Ring Replacement (Video/PDF).

*** Unplug the grinder from power supply ***

www.baratza.com suppo[email protected]m rev. 4/2/2019

-A BRIEF NOTE BEFORE BEGINNING-

Calibration on these models is a way to make small adjustments to burr spacing. This

adjustment is included in the design of the grinder for our factory to compensate for tolerance

stack-up which enables us to provide a consistent product. In general, your grinder should not

need recalibration. If you are experiencing a shift in grind performance, please rst follow our

troubleshooting guide referenced above.

Remove the case using our Case Removal guide.

www.baratza.com suppo[email protected]m rev. 4/2/2019

Rotate the black

adjustment ring until the

three windows in the

white calibration ring are

accessible.

A #0 Phillips screw will

be in one of the three

windows. We opened up

this grinder to nd it in the

middle window.

Remove the screw. Note

that there are two holes

that the screw can be

threaded into.

Here, the windows (obscured in this

view) are on the left side of the grinder

for easiest access.

#0 Phillips screw

Holes

Windows

Front of Grinder

www.baratza.com suppo[email protected]m rev. 4/2/2019

Placing the screw in the

left window results in a

coarse calibration.

Placing the screw in the

right window results in a

ne calibration.

IF CALIBRATING FINE,

ENSURE THAT BOTH

HOLES ARE VISIBLE IN

THE RIGHT WINDOW.

Setting the screw too

far to the right may

result in separation

of the calibration ring

and adjustment ring.

If your rings separate,

see our Adjustment

Ring replacement

guide.

To adjust your calibration,

hold the white ring with

one hand, keeping it

from rotating. Using the

other hand, turn the black

ring to reposition the

screw hole to the desired

location.

Coarse Fine

Only one hole is visible - the rings will

separate and compromise grind quality.

BAD

STATIONARY

ROTATE

www.baratza.com suppo[email protected]m rev. 4/2/2019

Insert the screw and

tighten until the screw

head makes contact with

the white calibration ring.

Rotate the adjustment

system fully counter-

clockwise.

Install the case and return the unit to operation.

If you have any questions,

or encounter issues

with this guide, contact

support@baratza.com

** Be careful not

to over-tighten the

screw. This may

puncture the black

adjustment ring and

impede ring burr

tment. **

Andere Handbücher für Maestro

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Baratza Kaffeemühle Handbücher

Baratza

Baratza SETTE 30 AP Bedienungsanleitung

Baratza

Baratza sette 270 Bedienungsanleitung

Baratza

Baratza VIRTUOSO+ Bedienungsanleitung

Baratza

Baratza VARIO-W Bedienungsanleitung

Baratza

Baratza sette 270 Bedienungsanleitung

Baratza

Baratza Forté AP Bedienungsanleitung

Baratza

Baratza SETTE 270W Bedienungsanleitung

Baratza

Baratza Forté-BG Bedienungsanleitung

Baratza

Baratza Maestro Plus Bedienungsanleitung

Baratza

Baratza VARIO-W Bedienungsanleitung

Baratza

Baratza SETTE 30 Bedienungsanleitung

Baratza

Baratza Encore Bedienungsanleitung

Baratza

Baratza Encore Bedienungsanleitung

Baratza

Baratza sette 270 Bedienungsanleitung

Baratza

Baratza VIRTUOSO+ Bedienungsanleitung

Baratza

Baratza SETTE 30 Bedienungsanleitung

Baratza

Baratza Vario Bedienungsanleitung

Baratza

Baratza Virtuoso Bedienungsanleitung

Baratza

Baratza Vario Bedienungsanleitung

Baratza

Baratza Sette 270Wi Bedienungsanleitung

Baratza

Baratza Forté Bedienungsanleitung

Baratza

Baratza Maestro Gebrauchs- und Pflegehandbuch

Baratza

Baratza Preciso Bedienungsanleitung

Baratza

Baratza Maestro Plus Bedienungsanleitung

Beliebte Kaffeemühle Handbücher anderer Marken

SOLAC

SOLAC All4Coffee MC6253 Bedienungsanleitung

Teesa

Teesa TSA4011 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home HG KD 40 Bedienungsanleitung

tomado

tomado TM-1287 Bedienungsanleitung

Aicok

Aicok CG9220 Bedienungsanleitung

Zelmer

Zelmer ZCG7925 Bedienungsanleitung

Isomac

Isomac ROBY Bedienungsanleitung

Eldom

Eldom Dott MK60 Bedienungsanleitung

Bunn

Bunn SAFETY-FRESH 1 GPR Bedienungsanleitung

FAMITEC

FAMITEC BOLD Bedienungsanleitung

Santos

Santos SC55 Betriebsanleitung

Lumme

Lumme LU-2601 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi MC02 Bedienungsanleitung

Eureka

Eureka Zenith E Bedienungsanleitung

Bunn

Bunn HVG Gebrauchsanweisung

SEVERIN

SEVERIN KM 3878 Benutzerhandbuch

Bosch

Bosch SOLUTION 6000 Bedienungsanleitung

Imetec

Imetec MACINACAFFE Bedienungsanleitung