Barco Coronis MDCC 2121 Bedienungsanleitung

Getting Started Guide

Coronis

Supported displays:

MDCC 2121, MDCG 2121, MDCG 3120

(This page intentionally left blank.)

This document is copyrighted. All rights are reserved. Neither this

document, nor any part of it, may be reproduced or copied in any

form or by any means - graphical, electronic, or mechanical including

photocopying, taping or information storage and retrieval systems -

without written permission of Barco

Notice

Although every attempt has been made to achieve technical accuracy

in this document, we assume no responsibility for errors that may be

found. Our goal is to provide you with the most accurate and usable

documentation possible; if you discover errors, please let us know.

Barco software products are the property of Barco. They are

distributed under copyright by Barco N.V. or Barco, Inc., for use only

under the specific terms of a software license agreement between

Barco N.V. or Barco Inc. and the licensee. No other use, duplication, or

disclosure of a Barco software product, in any form, is authorized.

The specifications of Barco products are subject to change without

notice.

Trademarks

All trademarks and registered trademarks are property of their

respective owners.

Patent information

This product is covered under the following intellectual property

rights:

US Patent RE43,707

US Patent 7,038,186

US Patent 7,166,829

US Patent 6,950,098

European Patent 1 274 066.

Indications for use

The Coronis displays are intended to be used in displaying and

viewing digital images for review and analysis by trained medical

practitioners.

The Coronis displays are not intended for primary diagnostic review of

Mammography images.

Table of Contents

Preface..................................................................................... 7

Regulatory compliance information................................................ 8

FCC Compliance Information..................................................... 8

Canadian notice ........................................................................ 9

CE mark notice ............................................................................... 10

Environmental information ........................................................... 11

Safety Instructions ......................................................................... 14

EMC notice ...................................................................................... 17

Explanation of symbols.................................................................. 23

Recommendations for using your display system ....................... 25

Display controller installation ............................................... 27

Display Controller Installation ....................................................... 28

Which display controller? ....................................................... 28

Installing a Barco display controller....................................... 28

Installation Procedure............................................................. 31

Display installation ................................................................ 37

Installation precautions ................................................................. 38

Display parts, controls and connectors ......................................... 39

Front ........................................................................................ 39

Rear ......................................................................................... 41

Connectors............................................................................... 41

Side.......................................................................................... 42

Foot.......................................................................................... 43

Single-head installation................................................................. 45

Dual-head installation ................................................................... 47

Vesa-mount installation ................................................................ 50

Adjust panel orientation................................................................ 51

Table of Contents

Connecting the signal cables......................................................... 52

Cable routing.................................................................................. 55

Cleaning instructions...................................................................... 58

Precautions.............................................................................. 58

Front glass............................................................................... 58

Cabinet .................................................................................... 59

Software installation ............................................................. 61

Driver and Software Installation ................................................... 62

Driver and software installation prerequisites...................... 62

Installing the BARCO MXRT drivers and software ................... 62

Installing the BARCOMED CORONIS or Nio drivers and software68

Where to get more information............................................ 75

Troubleshooting..................................................................... 77

General tips .................................................................................... 78

Configuring Windows..................................................................... 79

Setting the resolution of your BARCO CORONIS Display............ 79

Setting the Color and Palette Modes..................................... 81

Configuring the Windows desktop......................................... 81

Technical Specifications......................................................... 83

Warranty Statement .............................................................. 93

Preface

Regulatory compliance information

FCC Compliance Information

CLASS B:

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with manufacturer’s instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including

interference that may cause undesired operation.

The use of shielded cables for connection of the monitor to the

graphics card is required to ensure compliance with FCC regula-

tions. Changes or modifications to this unit not expressly

approved by Barco could void the user’s authority to operate this

equipment.

Regulatory compliance information

Canadian notice

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est conforme à la norme NMB-001 du Canada.

CE mark notice

Declaration of Conformity in accordance with Article 10 (1) of the CE directive

This product has been designed and manufactured in accordance with

the essential requirements of the Directives 2004/108/EC and

MDD 93/42/EEC (amended by 2007/47/EC (class II b product), and

for this product the procedures of Annex II have been applied to mark

the product with the CE label.

Andere Handbücher für Coronis MDCC 2121

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Barco Monitor Handbücher

Barco

Barco MDSC-2326 MNAH Bedienungsanleitung

Barco

Barco X Series Benutzerhandbuch

Barco

Barco Nio MKII Bedienungsanleitung

Barco

Barco MDSC-1119 Bedienungsanleitung

Barco

Barco MDSC-2224 Montageanleitung

Barco

Barco RHDM-2301 Bedienungsanleitung

Barco

Barco TF-20 Handbuch

Barco

Barco Nio Fusion12MP Bedienungsanleitung

Barco

Barco MDSC-2226 Bedienungsanleitung

Barco

Barco MDSC-8358 MNA Series Bedienungsanleitung

Barco

Barco MDRC-2124 Bedienungsanleitung

Barco

Barco R9850100 Bedienungsanleitung

Barco

Barco CVM 2037 Bedienungsanleitung

Barco

Barco Nio 5MP Bedienungsanleitung

Barco

Barco LDX-55 Betriebsanleitung

Barco

Barco MDSC-8427 Bedienungsanleitung

Barco

Barco LC series R5976934 Bedienungsanleitung

Barco

Barco System manual E1 Bedienungsanleitung

Barco

Barco ILite 6 BK Bedienungsanleitung

Barco

Barco AMM215WTTP Bedienungsanleitung

Barco

Barco NX--4 Bedienungsanleitung

Barco

Barco MDSC-2224 Bedienungsanleitung

Barco

Barco MDRC-1119 TS Bedienungsanleitung

Barco

Barco B-16 Mobile LED Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung