Barco HDM 5049 PLUS Bedienungsanleitung

HIGH DEFINITION MONITOR

HDM 5049 PLUS

USER’S MANUAL

Serial Number:

Edition:May 27th, 1999

Part Number: V598958/01

BARCO N.V.

Communication Systems

Th. Sevenslaan 106

B-8500 Kortrijk(Belgium)

Tel.:+32.56.233.211

Fax: + 32.56.233.461

E-mail:support.bcs@barco.com

Web site: http://www.barco.com

HDM 5049 PLUS Contents

Page i

Contents

1 SAFETY INSTRUCTIONS.............................................................................1-1

1.1 FCC NOTICE.....................................................................................................................1-1

1.2 POWER CONNECTION.........................................................................................................1-1

1.3 WATER AND MOISTURE.......................................................................................................1-1

2 FEATURES ...................................................................................................2-1

3 HDM 5049 PLUS INSTALLATION................................................................3-1

3.1 PRECAUTIONS....................................................................................................................3-1

3.2 RACK MOUNTING ...............................................................................................................3-1

3.3 SIGNAL CONNECTION .........................................................................................................3-1

3.3.1 Factory-stored HDTV Modes...................................................................................3-2

3.3.2 Vivaldi Modes..........................................................................................................3-2

3.3.3 Sync Input Conditions .............................................................................................3-3

4 OPERATION AND ADJUSTMENT ...............................................................4-1

4.1 USING THE KEYBOARD .......................................................................................................4-1

4.2 MAIN MENU.......................................................................................................................4-2

4.3 STATUS MENU ...................................................................................................................4-2

4.4 SETTINGS MENU ................................................................................................................4-2

4.4.1 Modename..............................................................................................................4-3

4.4.2 AKB.........................................................................................................................4-3

4.4.3 Orbiter.....................................................................................................................4-3

4.4.4 Degauss rate...........................................................................................................4-4

4.4.5 Color temp...............................................................................................................4-4

4.4.6 White level...............................................................................................................4-4

4.4.7 Change password ...................................................................................................4-4

4.4.8 Other Menu Items....................................................................................................4-4

4.5 ADJUSTMENTS MENU .........................................................................................................4-5

4.5.1 Color .......................................................................................................................4-5

0DQXDO

........................................................................................................................4-5

$XWRPDWLF

....................................................................................................................4-6

4.5.2 Geometry................................................................................................................4-8

4.5.3 Uniformity................................................................................................................4-9

0RLUpFDQFHOHU

.............................................................................................................4-9

'\QDPLF+IRFXV

.........................................................................................................4-9

9:+8QLIRUPLW\

..........................................................................................................4-9

$;:+8QLIRUPLW\

.......................................................................................................4-9

4.6 INFORMATION MENU.........................................................................................................4-10

5 TECHNICAL SPECIFICATIONS...................................................................5-1

HDM 5049 PLUS Safety Instructions

Page 1-1

1 SAFETY INSTRUCTIONS

•Read the safety and operating instructions before operating the monitor.

•Retain safety and operating instructions for future reference.

•Adhere to all warnings on the monitor and in the operating instructions manual.

•Follow all instructions for operation and use.

This monitor conforms to the following rules: DHHS21, IEC950/EN60950, UL1950, C-UL950.

1.1 FCC Notice

This equipment has been tested and found to comply with the limits of a class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

1.2 Power Connection

•Power requirements: connect the monitor to an AC voltage as indicated at its back. Using a

lower voltage, the monitor will not be able to operate. Using a higher voltage may damage the

monitor.

THIS APPARATUS MUST BE EARTHED!

The wires in the mains lead are colored in accordance to the following code :

CEE7 and British Standard:

Green-and-yellow: Earth (safety earth)

Blue: Neutral

Brown: Live

ANSI 73.11:

Green-and-yellow: Ground

White: Neutral

Black: Live

•Do not overload wall outlets and extension cords as this may result in fire or electric shock.

•Mains lead protection (U.S.: Power cord): Supply cords should be routed so that they are not

likely to be walked upon or pinched by items placed upon or against them, paying particular

attention to cords at plugs and receptacles.

1.3 Water and Moisture

•Never expose the monitor to rain or moisture.

•Never use the monitor near water.

WARNING!

HDM 5049 PLUS Features

Page 2-1

2 FEATURES

The HDM 5049 PLUS is equipped with a super high resolution CRT and a dark and flat face plate,

ensuring high contrast ratio and natural looking pictures.

Resolution is maintained by excellent spot performance and ultra fine pitch (= 0.26 mm). Its sleek

16:9 aspect ratio and reduced rack space requirements make it the ideal studio picture quality

monitor for today’s crammed control and equipment rooms.

Standard features are:

•16:9 aspect ratio

•19” picture tube (17” visible)

•Occupies only 8 RU space in a 19” rack

•Superfine dot pitch of 0.26 mm

•Small spot size over the entire screen

•Automatically adjusts to different HD input formats, up to 1080L x 1920P, interlaced.

•Short and long term color stability thanks to the AKB system (Automatic Kinescope Biasing)

•High bandwidth RGB inputs

•User-friendly keyboard and OSD guide the operator through the basic operation and menus for

color and geometry alignment

•Automatic Color Alignment with Thoma Color Analyzer.

•Orbiting to avoid burn-in of the CRT phosphors

•Compatible with BARCO’s VIVALDI display system products

HDM 5049 PLUS HDM 5049 PLUS Installation

Page 3-1

3 HDM 5049 PLUS INSTALLATION

3.1 Precautions

•Keep your original packaging. It is designed for this monitor and is the ideal protection during

transport.

•Do not lift the monitor alone to avoid injury.

•Avoid reflections in the picture tube to reduce eye strain.

•Keep the monitor away from heat sources and provide enough ventilation if it is installed in a

rack or console.

•Keep the monitor away from strong sources of magnetic radiation.

3.2 Rack Mounting

The monitor should be mounted in a 19” rack. Four retaining screws in the handles keep the

monitor in place.

Do not cover or block the ventilation openings in the cover.

3.3 Signal Connection

SERVICE 75E R G B HS/CS VS

POWER

Voltage Range:

100 - 240V AC

LINE

Five BNC connectors are available at the rear of the monitor: R, G, B, HS/CS and VS. When the

monitor is the only monitor connected to the source or the last one in a chain, the 75 ohm

termination switch should be set in the lower position.

To loop-through the video signals, use T- or Y-connectors and place the 75 ohm termination switch

in the upper position.

A Thoma Color Analyzer can be connected to the SERVICE connector using the optional

ThomaLink cable (order number Z345501).

WARNING!

HDM 5049 PLUS Installation HDM 5049 PLUS

Page 3-2

3.3.1 Factory-stored HDTV Modes

System: 480L x

704P

60P

720L x

1280P

60P

1035L x

1920P

60I

1080L x

1920P

60I

Mode Name: SMPTE293M

(483L x 720P) SMPTE296M SMPTE240M-

260M SMPTE274M

Horizontal Timings: Units

Horizontal Scan Frequency: kHz 31,5 45 33,75 33,75

Total Line Time: µs 31,75 22,22 29,63 29,63

Active Line Time: µs 26,64 17,24 25,86 25,86

Horizontal Blanking: µs 5,1 4,98 3,77 3,77

Horizontal Sync Width: µs 2.33(*) 0.54(*) 0.6 (*) 0.6(*)

Horizontal Front Porch: µs 0.63(*) 1.50(*) 1.2 (*) 1.2(*)

Horizontal Back Porch: µs 2.15 2.95 1.99 1.99

Vertical Timings: Units

Scan System: I / P P P I I

Vertical Scan Frequency: Hz 60 60 60 60

Active Lines / Frame: Lines 483 720 1035 1080

Active Frame Time: ms 15,33 16 30,66 32

Blanking Lines / Frame: Lines 42 30 90 45

Blanking Time Frame: ms 1,33 0,67 2,66 1,34

Total Lines / Frame: Lines 525 750 1125 1125

Active Lines / Field: Lines 517,5 540

Active Field Time: ms 15,33 16

Blanking Lines / Field: Lines 45 22,5

Blanking Time / Field: ms 1,33 0,67

Total Lines / Field: Lines 562,5 562,5

Vertical Sync Width: Lines 6555

Vertical Front Porch: Lines 6 5 2-2.5 2

Vertical Back Porch: Lines 30 20 38-37.5 15

(*) Conversion from tri-level sync to bi-level sync

1035Lx1920P 60I is not stored as a separate mode, but the HDM 5049 PLUS displays this signal

type using the 1080Lx1920P 60I mode. The only difference is the number of active lines.

3.3.2 Vivaldi Modes

Two VIVALDI Modes (only for 525 lines / 60 Hz) are factory-stored as well: 4 Pictures and 1 Picture

Full Screen.

When connected to a VIVALDI, you have to configure the VIVALDI for positive

horizontal and vertical sync, no composite sync, no sync on green. Set the

VIVALDI to 4/3 (positive vertical sync). The HDM 5049 PLUS is already

aligned for 16/9. Do not toggle between 4/3 and 16/9 on the VIVALDI, since

this changes the vertical sync polarity.

IMPORTANT!

Inhaltsverzeichnis

Andere Barco Monitor Handbücher

Barco

Barco MDSC-8231 Bedienungsanleitung

Barco

Barco RHDM-1701 Bedienungsanleitung

Barco

Barco OverView EVD4621 Betriebsanleitung

Barco

Barco MDSC-2326 MNAH Bedienungsanleitung

Barco

Barco Coronis Fusion 4MP Bedienungsanleitung

Barco

Barco Coronis 5MP (MFGD5421) Bedienungsanleitung

Barco

Barco LDX-55 Betriebsanleitung

Barco

Barco Eonis MDRC-2324 Bedienungsanleitung

Barco

Barco Coronis Fusion 4MP Bedienungsanleitung

Barco

Barco OPScenter Bedienungsanleitung

Barco

Barco Solaris LC40 Bedienungsanleitung

Barco

Barco SLite 10 XP Produkthandbuch

Barco

Barco MDSC-1119 Bedienungsanleitung

Barco

Barco Nio systems Bedienungsanleitung

Barco

Barco I-Guard Betriebsanleitung

Barco

Barco B-10 Bedienungsanleitung

Barco

Barco X8 Benutzerhandbuch

Barco

Barco MDNG-3220 Bedienungsanleitung

Barco

Barco MDCG-5221 Bedienungsanleitung

Barco

Barco WeaveMaster Bedienungsanleitung

Barco

Barco Nio Color 3MP Bedienungsanleitung

Barco

Barco Eonis MDRC-2224 Bedienungsanleitung

Barco

Barco FlexiVision III Bedienungsanleitung

Barco

Barco OVL-815 Montageanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung