Basler HOUSING TRANSPAC TPH 4000 Bedienungsanleitung

Basler Accessories

Installation Guide

HOUSING TRANSPAC TPH 4000, PoE

Outdoor Camera Housing with Sunshield, IP67

Order Number

2000032064

Document Number: AW001300

Version: 01 Language: 000 (English)

Release Date: 26 March 2014

DRAFT

Contacting Basler Support Worldwide

Europe and the Middle East:

Basler AG Phone: +49 4102 463 515

An der Strusbek 60 - 62 Fax: +49 4102 463 599

22926 Ahrensburg Email: [email protected]m

Germany

The Americas:

Basler, Inc. Phone: +1 610 280 0171

855 Springdale Drive, Suite 203 Fax: +1 610 280 7608

Exton, PA 19341 Email: sup[email protected]

U.S.A.

Asia:

Basler Asia Pte. Ltd Phone: +65 6367 1355

35 Marsiling Industrial Estate Road 3 Fax: +65 6367 1255

# 05 - 06 Email: support.asia@baslerweb.com

Singapore 739257

www.baslerweb.com

All material in this publication is subject to change without notice and is copyright

Basler AG.

AW00130001000 Introduction

Housing Transpac TPH 4000, PoE 1

1 Introduction

Purpose of this Document

This document is designed to give an overview over the technical specifications of the Transpac

TPH 4000 PoE housing. It will also explain how to install a camera inside the housing. This

document should be used in conjunction with the respective Basler camera user’s manual.

Key Features of the Camera Housing

Die-cast aluminum housing, ivory-colored powder coating

Fully cable-managed wall mount

Suitable for indoor/outdoor installation

Adjustable camera mounting platform

Internal heater for defogging

Internal fan for temperature management

IP67 cable glands

Internal power supply unit with spare terminal and fuse block

Camera connection and power supply for camera and heater/fan in a single cable

Weight: 4 kg

Suitable for Basler IP cameras

NOTICE

When using this housing in aggressive environments (e.g. where it is exposed to high humidity,

salt water, or other corrosive elements), corrosion of the housing and/or camera can occur.

To prevent this, seal all external stainless steel screws and fittings with a silicone grease

compound. This will help to extend the lifespan of the housing and the camera. This is especially

important for the wall mount.

WARNING

Incorrect electrical connections can damage the camera and lead to injuries when

using the housing and camera.

1. Disconnect the camera from the main power supply before opening the

housing.

2. Electrical connections should only be made by a qualified electrician.

Introduction AW00130001000

2Housing Transpac TPH 4000, PoE

Package Contents

Included with the housing are a wall mount as well as various parts needed for installing the wall

mount and for mounting a camera inside the housing.

Fig. 1: Camera Housing (Internal View)

Fig. 2: Wall Mount

Front window

Heater

Thermostat

RJ45 camera

connector

Camera mounting

platform

PoE+

input

Cable

gland

Power

supply

unit 12 VDC

output

Fan

AW00130001000 Introduction

Housing Transpac TPH 4000, PoE 3

Fig. 3: Assembly Parts

Items needed for installing the wall mount:

3 plastic anchors

3 stainless steel hex head cap screws

1 L-type hex key

Items needed for mounting a camera inside the housing:

1 steel socket head cap screw, 1/4" x 1/2"

1 plastic pad

1 plastic shoulder washer

1 large steel washer

2 small steel washers

1 L-type hex key

Note that all other parts included in the package are not needed for standard

installations.

Plastic

anchors

Hex head

cap screws

Plastic pad

Plastic

shoulder

washer

Not required

for

installation

L-type hex key

Small steel

washers

Socket head

cap screw

Large steel

washer

Introduction AW00130001000

4Housing Transpac TPH 4000, PoE

Dimensions (in mm)

Fig. 4: Dimensions Housing

Maximum dimensions (external): 405 (L) x 150 (W) x 150 (H)

Maximum camera mounting space: 260 (L) x 90 (W) x 70 (H)

Fig. 5: Dimensions Wall Mount Base

130

126

150

405

370

150

94.95

69.00 12.98

82.80

AW00130001000 Introduction

Housing Transpac TPH 4000, PoE 5

Fig. 6: Dimensions Wall Mount

Technical Specifications

External Power Supply PoE+ (30 W) Input Power Supply, IEEE802.3at-compliant

Internal Power Output PoE (15 W), IEEE802.3af-compliant

3 x 12 VDC, max. 2.5 A (including heater and fan)

Heater Control 18 °C (On) / 28 °C (Off)

Fan Control 35 °C (On) / 25 °C (Off)

Operating Temperature -20 °C to 50 °C

Note: Check the operating temperature of the camera that you are going to

use as its operating temperature may differ from that of the housing.

Protection Level IP67

Temper Glass Thickness 4 mm

Table 1: Specifications

A PoE+ (30 W) injector suitable for Basler cameras can be purchased from Basler.

190

227

105 50

Introduction AW00130001000

6Housing Transpac TPH 4000, PoE

Electrical Information

Fig. 7: Terminal Block

3 x 12 VDC

AW00130001000 Introduction

Housing Transpac TPH 4000, PoE 7

Fig. 8: Wiring Diagram

The unused 12 VDC power outputs can be used to power lens motors, lighting equipment,

sirens etc.

Certifications

CE Compliant with EN 55022:2010 Class B

LVD Compliant with EN 60950-1:2006+A11:2009+A1:2010+A12:2011

FCC Compliant with FCC Part 15:Subpart B (10-1-10 Edition) Class B

CISPR 22:2008 Class B

IP67 Compliant with IEC 60529

RoHS Fully compliant

SVCH Fully compliant

Table 2: Certifications

Camera Ethernet PoE output

3 x 12 VDC

terminals

Ethernet PoE+

(30 W) input

Heater

Fan

Thermostat

PSU

Mounting a Camera AW00130001000

8Housing Transpac TPH 4000, PoE

2 Mounting a Camera

This Transpac TPH 4000 PoE camera housing can accommodate Basler IP cameras.

Preparing the Housing

In order to install a Basler IP camera inside the housing, you have to remove the camera mounting

platform (see Fig. 9) from the housing.

Fig. 9: Removing the Camera Mounting Platform

Camera mounting platform

Andere Handbücher für HOUSING TRANSPAC TPH 4000

Inhaltsverzeichnis

Andere Basler Sicherheitskamera Handbücher

Basler

Basler dome camera Bedienungsanleitung

Basler

Basler A504k Bedienungsanleitung

Basler

Basler BIP2-XXXXc Bedienungsanleitung

Basler

Basler L304kc Bedienungsanleitung

Basler

Basler A640F Bedienungsanleitung

Basler

Basler L400k Bedienungsanleitung

Basler

Basler SCOUT LIGHT Bedienungsanleitung

Basler

Basler exA640-60m Bedienungsanleitung

Basler

Basler ace CL Montageanleitung

Basler

Basler BIP2-D series Bedienungsanleitung

Basler

Basler L301k Bedienungsanleitung

Basler

Basler A600f Bedienungsanleitung

Basler

Basler GigE SERIES Bedienungsanleitung

Basler

Basler aviator Montageanleitung

Basler

Basler BIP2-DXXXXc-dn Bedienungsanleitung

Basler

Basler L201 Bedienungsanleitung

Basler

Basler SCOUT LIGHT Bedienungsanleitung

Basler

Basler pilot Bedienungsanleitung

Basler

Basler racer Bedienungsanleitung

Basler

Basler Camera Bedienungsanleitung

Basler

Basler IP Fixed Dome Camera Bedienungsanleitung

Basler

Basler BIP2-DXXXXc-dn Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung