Baxi Platinum 2 Combi 28 GA Bedienungsanleitung

Please keep these instructions in a safe place.

If you move house, please hand them over to the next occupier.

Platinum2CombiGARange

Gas Fired Wall Mounted Condensing

Combination Boiler

i-THINK Set Up Guide,

User’s Operating Instructions &

Important Warranty Information

2© Baxi Heating UK Ltd 2011

be reproduced or transmitted in any form or by any means, or stored in any

retrieval system of any nature (including in any database), in each case whether

electronic, mechanical, recording or otherwise, without the prior written

permission of the copyright owner, except for permitted fair dealing under

Copyrights, Designs and Patents Act 1988.

Applications for the copyright owner’s permission to reproduce or make other

use of any part of this publication should be made, giving details of the proposed

use, to the following address:

The Company Secretary, Baxi Heating UK Ltd,

Brooks House, Coventry Road, Warwick. CV34 4LL

Full acknowledgement of author and source must be given.

WARNING: Any person who does any unauthorised act in relation to a

1.0 Quick Reference Guide 3

2.0 Troubleshooting 4

3.0 Setting the Time 6

4.0 Setting the Central Heating Times 7

5.0 Mode Selection/Temp Adjustment 9

6.0 Resetting the Boiler 13

7.0 Repressurising System 14

8.0 Clearances 15

9.0 Legislation 16

10.0 Care of the Boiler 17

11.0 Fault Finding 18

12.0 Notes 19

13.0 Warranty & Service 20

Section Page

Contents

Boiler i-THINK Controller - see opposite

page for Operating Quick Reference

Guide

0085

ISO 9001

FM 00866

The Benchmark Scheme

Baxi Heating UK Ltd is a licensed member of the Benchmark Scheme which aims

to improve the standards of installation and commissioning of domestic heating

and hot water systems in the UK and to encourage regular servicing to optimise

safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry

Council. For more information visit www.centralheating.co.uk

Natural Gas

Baxi Platinum 2 Combi 28 GA

G.C.No 47-075-61

Baxi Platinum 2 Combi 33 GA

G.C.No 47-075-62

Baxi Platinum 2 Combi 40 GA

G.C.No 47-075-63

1.0 Quick Reference Guide

Burner in Operation

Heating to the Comfort Setpoint

Heating to the Reduced Setpoint

Central Heating Times Active

DHW Time Active

Combustion Check Function Active

Holiday Function Active

Manual Override

Time Switch Function Active

i-THINK Controller & Main PCB Established

i-THINK Controller Programmed as Room Sensor

Error Message

Standby - Appliance ON/OFF (OFF = Frost Protection)

Outdoor Sensor Connected

System / Appliance Attention Required

Maintenance / Special Mode

Water Pressure too low

Change Battery (only if radio control fitted)

Text 3

Text 1

Text 2

Display showing all available segments

Display Descriptions

i-THINK Controller

04. November 2008 08:50

Tuesday

1.6 bar

Menu Button

Easy Menu

Button Selector Button (Turn /Push Select)

The Easy menu button

Commonly required functions are available more quickly via the

Easy Menu Button. To access, press the Easy Menu Button and

scroll through, confirm your selection by pressing the Selector

Button.

Commonly required functions are shown in order below: -

1. Standby/operation - The on/off switch - in the off mode frost

protection for the appliance is active: displays when in

standby.

2. Hot water boost - Not applicable

3. Central heating mode CH1 - Easy access to change the

operating mode see Section 5.1

4. Room temperature CH1 - The central heating temperature

can be altered permanently.

5. Hot water mode - Easy access to change the operating

mode On or Off (Eco function - not applicable)

6. Hot water temp setpoint - The hot water temperature can

be altered permanently.

24 hour time bar for central heating and domestic

hot water - shows active programme times

- Default 6am - 9am, 11am - 12pm & 15pm - 22pm

Standby

2.0 Troubleshooting

4© Baxi Heating UK Ltd 2011

Boiler not working

START

Make sure the gas

supply is turned ON

and check if other

gas appliances are

operating (e.g. fire,

cooker).

If no gas, consult

your supplier.

Is there electricity to the

boiler ? Is the display lit ?

04. November 2008 08:50

1.6 bar

Tuesday

Check electrical supply to

boiler is switched on.

YES Is the Burner Flame

showing.

04. November 2008 08:50

Tuesday

1.6 bar

Burner Flame

(Indicates burner

is on)

Boiler operating

satisfactorily.

YES

YES Is the E symbol illuminated ?

Yes

157: Boiler flow thermostat

Reset ?

Error

YES

Press the Selector Button to Reset

Error

Symbol

If it does

not reset

CONTACT YOUR

INSTALLER OR

SERVICE

ENGINEER.

266:Fan Fault

Error

Is the Crossed out Flame and

Spanner symbol illuminated or

flashing ?

YES

Spanner

Symbol

Boiler

Temperature

Central Heating

Error Code

Flame

Failure

Selector Button

To reset - Press the Selector

Button and the Yes / No mode

will appear. While flashing turn

the Selector Button to toggle

between Yes and No. Select

Yes and press the Selector

Button to select.

2.0 Troubleshooting

Is the Timer ON and

calling for heat ?

Is the Room Thermostat (if

fitted) set high enough ?

Typical

examples of

external timer

Ensure timer is set for Central

Heating ON (see any

instructions supplied with timer)

YES YES

Turn Room Thermostat

to maximum setting

(typical example shown)

If you don’t know what you need to do

to get the boiler to light, or need help

with the system and controls, contact

your installer as soon as possible

CH ON CH OFF

bar

Is the Central Heating

System Pressure between 1

and 2.5 bar ?

If the reading falls below 1 bar

repressurise the system as

described in section 4.1.

0.5

118:Water pressure too low

Error

Error Code 118 showing low

pressure.

YES

3.0 Setting the Time

6© Baxi Heating UK Ltd 2011

3.1 Time Setting

The time, day, date and year can be adjusted using the i-THINK

Controller as shown below.

04. November 2008 08:50

Tuesday

1.6 bar

i-THINK Controller

Menu Button

Display Screen

Set time and date

---------------------------------------------------

Information

Operator section

Information

Set time and date

Hours / minutes 09:07

Set time and date

04. November 2008 08:50

Tuesday

1.6 bar

The basic display is shown.

If the basic display is not

showing, press the MENU

button. until the

basic display is shown

Press the MENU button.

Turn the Selector Button

clockwise to highlight Set time

and date Press the Selector Button to

select .

Press the Selector Button and

the hour number flashes. Turn

Selector Button to the required

hour.

Hours / minutes 11:07

Set time and date

Press the Selector Button and

the minute number flashes.

Turn the Button to the required

minute. Press the Selector

Button.

Hours / minutes 11:30

Set time and date

Day / month 05:06

Set time and date

Turn the Selector Button

clockwise until Day / month is

shown. Press the Selector Button

and the month number flashes.

Turn Button to the required

month.

Day / month 03:06

Set time and date

Press the Selector Button and

the day number flashes. Turn

Button to the required day.

Press the Selector Button.

Year 2008

Set time and date

Turn the Selector Button

clockwise until Year is shown.

Press the Selector Button and

the year number flashes. Turn

Button to the required year.

Year 2009

Set time and date

Press the Selector Button.

Time setting is now complete.

03. June 2009 11:30

Wednesday

1.6 bar

Press the MENU button

twice to return to normal

display screen.

Selector Button

STEP 1 STEP 2

STEP 3 STEP 4

STEP 5 STEP 6

STEP 7 STEP 8

STEP 9 STEP 10

STEP 11

Easy Menu

Button

4.0 Setting the Central Heating Times

i-THINK Controller

Menu Button

Display Screen

04. November 2008 08:50

Tuesday

1.6 bar

Selector Button

4.1 Programming the Central Heating Times

The i-THINK Controller enables control of up to three periods a

day, seven days a week.

There are 3 time programs preinstalled to aid reprogramming:-

Time program 1 has 3 time periods - Mon-Sun, 6-9, 11-12 and

15-22.

Time program 2 has two time switch periods - Mon-Sun, 6-9

and 15-22.

Time program 3 has one time switch period 6-22.

‘Preselection’ regimes are: Mon-Sun (Default) Mon-Fri and Sat-Sun

or each day individually.

If there are two heating circuits with two Programmer and Room

Sensors, each room/floor must be programmed using the

respective Programmer and Room Sensor. Choose the relevant

heating circuit at STEP 3.

When programming individual days, the opportunity to copy one

day to another is offered (screen 529). Lastly screen 536 enables a

reset to the default values as given above.

04. November 2008 08:50

Tuesday

1.6 bar Set time and date

---------------------------------------------------

Information

The basic display is shown.

If the basic display is not

showing, press the MENU

button. until the

basic display is shown

Press the MENU button.

Time central heating CH3

Operator section

Time central heating CH1

Mon - Sun

Select days

Time central heating CH1

Turn the Selector Button

clockwise to highlight ‘Time

central heating CH1’. Press the Selector Button to

select .

Press the Selector Button and

the day / days regime flashes.

Turn Button to the required

day or days Mon-Sun, Mon-

Fri, Sat-Sun

Mon, Tue, Wed,

Thu, Fri, Sat, Sun

Press Selector

Button to select.

Mon - Sun

Select days

Time cental heating CH1

Turn the Selector Button one

click clockwise.

Select default timings?

Mon - Sun

Time central heating CH1

Set to Time setting 1

Mon - Sun

Time central heating CH1

Press the Selector Button and

the time program regime flashes.

Turn Button to the ‘Time setting

1’. Press Selector Button to

select and the screen goes back

to STEP 6.

06:00

Mon - Sun: 1st Time ON

Time central heating CH1

Turn the Selector Button one

click clockwise.

STEP 1 STEP 2

STEP 3 STEP 4

STEP 5 STEP 6

STEP 7 STEP 8

Easy Menu

Button

NOTE:When fitting the boiler to an existing

installation it may be desired to retain the external

control system already in place. In such circumstances

the i-THINK Controller should be set to ‘On’ heating

operation with no timed periods - see Section 5.1

Selecting the Central Heating Mode (as the external

control system will control the timed periods).

4.0 Setting the Central Heating Times

8© Baxi Heating UK Ltd 2011

4.1 Programming the Central Heating Times (cont)

11:00

Mon - Sun: 2nd Time ON

Time central heating CH1

Press the Selector Button and

the ‘2nd Time ON’ time will

flash. Turn the Button to the

required time. Press Selector

Button to select.

11:50

Mon - Sun: 2nd Time ON

Time central heating CH1

Turn the Selector Button one

click clockwise.

13:00

Mon - Sun: 2nd Time OFF

Time central heating CH1

15:00

Mon - Sun: 3rd Time ON

Time central heating CH1

Turn the Selector Button one

click clockwise.

Turn the Selector Button one

click clockwise and then press

the Button. The ‘2nd Time OFF’

time will flash. Turn the Button

to the required time. Press the

Selector Button to select.

17:00

Mon - Sun: 3rd Time ON

Time central heating CH1

23:00

Mon - Sun: 3rd Time OFF

Time central heating CH1

Turn the Selector Button one

click clockwise and then press

the Button. The ‘3rd Time

OFF’ time will flash. Turn the

Button to the required time.

Press the Selector Button to

select.

Press the Selector Button and

the ‘3rd Time ON’ time will

flash. Turn the Button to the

required time. Press Selector

Button to select.

STEP 11 STEP 12

STEP 13 STEP 14

STEP 15 STEP 16

Menu Button

Selector Button

04. November 2008 08:50

Tuesday

1.6 bar

Easy Menu

Button Display Screen

08:00

Mon - Sun: 1st Time ON

Time central heating CH1

Press the Selector Button and

the ‘1st Time ON’ time will

flash. Turn the Button to the

required time. Press Selector

Button to select.

10:00

Mon - Sun: 1st Time OFF

Time central heating CH1

Turn the Selector Button one

click clockwise and then press

the Button. The ‘1st Time

OFF’ time will flash. Turn the

Button to the required time.

Press the Selector Button to

select.

STEP 9 STEP 10

If --:-- appears when adjusting the ON/OFF Time it is

because the ON is the same as OFF. If this is selected the

Time period will disappear. A new Time period can be

introduced by starting from 24.00 and winding backwards.

i-THINK Controller

Press the MENU button

twice to return to normal

display screen.

NOTE:The heating times will not become

active until the i-Think controller is set to

the relevant cental heating mode ie. Reduced

or Timed - see Section 5.1 Selecting the

Central Heating Mode.

If no 3rd Time Period is needed, keep the ON and OFF

period as --:-- and press the Selector Button to set.

5.0 Mode Selection/Temp Adjustment

5.1 Selecting the Cental Heating Mode

1. There are 4 central heating modes: -

On - heating operates to keep the dwelling at

the comfort set point chosen by the

householder continuously ie. 24hr/day,

initially set at 20°C.

Reduced - heating operates to keep the dwelling at

the reduced setpoint chosen by the

householder continuously, initially set at

5°C (min 5°C - max 20°C).

Timed - heating operates to keep the dwelling at

the comfort setpoint chosen by the

householder according to the programme

times, initially set at 20°C (min 10°C - max

35°C).

Off - frost protection - boiler operates to

keep the flow temperature above 5°C

continuously.

2. The central heating mode can be set using either the i-THINK

Controller on the appliance or as a room unit (Programmer and

Room Sensor).

3. To select the mode required: - from the main screen press

the Menu Button.

4. Turn Selector Button to ‘Temps / mode CH1’.

Press Selector Button twice to select and turn the Button either

anticlockwise or clockwise to the required heating mode: On –

Reduced – Timed – Off, press Selector Button to select.

5.2 Further Information

1. The user must be aware that in the Timed mode the i-THINK

Controller is not inactive in between the programmed times, the

frost protection/reduced temperature period is constantly in the

background and will cause the appliance to come on if the room

temperature falls below the reduced temperature setpoint (5°

default) or 5°C during frost protection.

NOTE: Adjustment of the room temperature during these

periods will result in a temporary change to the reduced

temperature setting until the next On period is activated.

2. The central heating may be switched on at any time by

increasing the room temperature setpoint to a greater value

than the indicated room temperature whether in or out of a

programmed period. This setpoint change will remain active until

the next programmed On period when the setpoint will revert

to the permanent comfort setpoint.

Temps / mode hot water

Temps / mode CH1

Holidays heating CH1

Turn the Selector Button

clockwise to highlight ‘Temps /

mode CH1’.

Menu Button

Selector Button

04. November 2008 08:50

Tuesday

1.6 bar

Easy Menu

Button

Operating mode

Temps / mode CH1

04. November 2008 08:50

Tuesday

1.6 bar

Set time and date

---------------------------------------------------

Information

The basic display is shown.

If the basic display is not

showing, press the MENU

button. until the

basic display is shown

Press the MENU button.

Press the Selector Button twice

and then turn the Button either

anticlockwise or clockwise to the

required heating mode i.e. On

or Reduced or Timed or Off.

Press the Selector Button to

select.

STEP 4

STEP 3

STEP 2

STEP 1

i-THINK Controller

5.0 Mode Selection/Temp Adjustment

5.3 Adjusting the Domestic Hot Water Temperature

Menu Button

Selector Button

04. November 2008 08:50

Tuesday

1.6 bar

Easy Menu

Button Display Screen

04. November 2008 08:50

Tuesday

1.6 bar Set time and date

---------------------------------------------------

Information

Instantaneous HW heater

Temps / mode CH1

Temps / mode hot water

Operating mode

Temps / mode hot water

The basic display is shown.

If the basic display is not

showing, press the MENU

button. until the

basic display is shown

Press the MENU button.

Turn the Selector Button

clockwise to highlight Temps /

mode hot water.

Press the Selector Button to

select .

50 °C

Hot water temp setpoint

Temps / mode hot water

Turn Selector Button to the

required temperature. Press

the Selector Button to select.

Temperature setting is now

complete.

03. June 2009 11:30

Wednesday

1.6 bar

Press the MENU button

twice to return to normal

display screen.

STEP 1 STEP 2

STEP 3 STEP 4

STEP 5 STEP 6

STEP 7 STEP 8

55°C

Hot water temp setpoint

Temps / mode hot water

55 °C

Hot water temp setpoint

Temps / mode hot water

Turn the Selector Button

clockwise to highlight Hot water

temp setpoint.

Press the Selector Button and

the temperature degree

number will flash.

i-THINK Controller

Andere Handbücher für Platinum 2 Combi 28 GA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Baxi Kessel Handbücher

Baxi

Baxi Nuvola 3+ BS40 Bedienungsanleitung

Baxi

Baxi Combi 825 Bedienungsanleitung

Baxi

Baxi luna platinum+ Bedienungsanleitung

Baxi

Baxi ECOGEN 24/1.0 Versionshinweis

Baxi

Baxi LUNA HT 330 Datenblatt

Baxi

Baxi COMBI 224 Bedienungsanleitung

Baxi

Baxi Eco5 Compact+ Bedienungsanleitung

Baxi

Baxi PRIME 24 Bedienungsanleitung

Baxi

Baxi Megao System 15 - Megao System 18 - Megao System 24 - Megao System 28 - Megao System... Bedienungsanleitung

Baxi

Baxi Assure Combi 36 LPG Handbuch

Baxi

Baxi LUNA3COMFORT Bedienungsanleitung

Baxi

Baxi P-30 Konfigurationshandbuch

Baxi

Baxi 124 Combi Handbuch

Baxi

Baxi KALINA ARLEQUIN 3C Series Bedienungsanleitung

Baxi

Baxi Bioflo Versionshinweis

Baxi

Baxi NUVOLA PREMIX 23 Bedienungsanleitung

Baxi

Baxi 11p Bedienungsanleitung

Baxi

Baxi Duo-tec Combi 24 GA Bedienungsanleitung

Baxi

Baxi POWER HT+ 1.50 Bedienungsanleitung

Baxi

Baxi LUNA DUO-TEC MP+ 1.115 Leitfaden

Baxi

Baxi Luna HT Bedienungsanleitung

Baxi

Baxi 100/2 HE Plus Betriebsanleitung

Baxi

Baxi Combi Instant 80 HE Versionshinweis

Baxi

Baxi Solo HE A Range Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch