Baxi Solo HE A Series Betriebsanleitung

Please keep these instructions in a safe place.

If you move house, please hand them over to the next occupier.

Solo HE ARange

Wall Mounted Powered Flue Condensing

Boilers Gas Fired Central Heating Units

User’s Operating Instructions &

Important Warranty Information

2© Baxi Heating UK Ltd 2012

Natural Gas

Baxi Solo 12 HE A

G.C.No41 075 65

Baxi Solo 15 HE A

G.C.No41 075 66

Baxi Solo 18 HE A

G.C.No41 075 67

Baxi Solo 24 HE A

G.C.No41 075 68

Baxi Solo 30 HE A

G.C.No41 075 69

be reproduced or transmitted in any form or by any means, or stored in any

retrieval system of any nature (including in any database), in each case whether

electronic, mechanical, recording or otherwise, without the prior written

permission of the copyright owner, except for permitted fair dealing under

Copyrights, Designs and Patents Act 1988.

Applications for the copyright owner’s permission to reproduce or make other

use of any part of this publication should be made, giving details of the proposed

use, to the following address:

The Company Secretary, Baxi Heating UK Ltd,

Brooks House, Coventry Road, Warwick. CV34 4LL

Full acknowledgement of author and source must be given.

WARNING: Any person who does any unauthorised act in relation to a

1.0 Quick Reference Guide 3

2.0 Troubleshooting 4

3.0 Clearances 6

4.0 Care of the Boiler 7

5.0 Legislation 8

6.0 Notes 9

7.0 Emergency 11

8.0 Warranty & Service 12

Section Page

Contents

Boiler Controls - see opposite page

for Operating Quick Reference Guide

0086 ISO 9001

FM 00866

The Benchmark Scheme

Baxi Heating UK Ltd is a licensed member of the Benchmark Scheme which aims

to improve the standards of installation and commissioning of domestic heating

and hot water systems in the UK and to encourage regular servicing to optimise

safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry

Council. For more information visit www.centralheating.co.uk

1.0 Quick Reference Guide

Low

High

Reset

Lockout

(Red Light)

Burner On

(Green Light)

Mains On

(Green Light)

BoilerTemperature

Control Knob

(No OFF Position)

Reset Button

If Lockout Light is ON, press the Reset Button. If Lockout occurs

persistently consult your Installer or Service Engineer.

This indicates that the Burner has fired up and is heating

your system.

This indicates that there is electricity to the Boiler.

Turn the Boiler Temperature Control Knob clockwise to

increase or anticlockwise to decrease the temperature.

The Reset Button should extinguish the Lockout Light and

normal operation commence.

Low

High

Reset

Boiler Temperature Control

Turn the Boiler Temperature Control Knob

clockwise to increase or anticlockwise to

decrease the temperature.

Reset Button

If the Red Lockout Light ( ) is ON or

FLASHING, press the Reset button until the

red light goes OFF. If this occurs frequently a

fault is indicated and you should contact your

installer.

Low

High

Reset

Lockout LED Light

(Red)

Key to Controls

2.0 Troubleshooting

4© Baxi Heating UK Ltd 2012

Boiler not working

START

Make sure the gas

supply is turned ON

and check if other

gas appliances are

operating (e.g. fire,

cooker).

If no gas, consult

your supplier.

Is there electricity to the

boiler ? (Green Mains ON

Light lit).

Low

High

Reset

Mains ON Light

(Green)

Check electrical supply to

boiler is switched on.

YES Is the Green Burner ON

Light lit).

Low

High

Reset

Burner ON Light

(Green)

Boiler operating

satisfactorily.

YES

YES Is the Red Lockout Light

illuminated or flashing ?

Low

High

Reset

Low

High

Reset

YES

Press the Reset Button

until the red light goes off.

Lockout

(Red)

Reset Button If the light

does not go

out or keeps

coming on.

CONTACTYOUR

INSTALLER OR

SERVICE

ENGINEER.

2.0 Troubleshooting

Is the Timer ON and

calling for heat ?

Is the Room Thermostat (if

fitted) set high enough ?

Typical

examples of

external timer

Ensure timer is set for Central

Heating ON (see any

instructions supplied with timer)

YES YES

Turn Room Thermostat

to maximum setting

(typical example shown)

If you don’t know what you need to do

to get the boiler to light,or need help

with the system and controls,contact

your installer as soon as possible

CH ON CH OFF

3.0 Clearances

6© Baxi Heating UK Ltd 2012

50mm

600mm

390mm

200mm

5mm Min

5mm

500mm

For Servicing

Purposes

Fig. 1

Fig. 2 In Operation

At least

1.5°

298mm

3.1 For your Safety

1. This appliance must have been installed in accordance

with the manufacturer’s instructions and the regulations

in force.

2. Any modification that may interfere with the normal

operation of the appliance without express written

permission from the manufacturer or his agent could

invalidate the appliance warranty. In GB this could also

infringe the Gas Safety (Installation and Use) Regulations.

3. Your boiler must not be operated without the casing

correctly fitted.

4. Do not interfere with any sealed components on this

boiler.

5. Take note of any warning labels on your boiler.

6. Your boiler should have the following minimum

clearances for Safety and Maintenance

(Figs. 1 & 2):-

Top - 200mm

Bottom - 50mm

Left side - 5mm

Right Side - 5mm

Front - 5mm (In Operation)

- 500mm (For Servicing)

7. If your boiler is installed in a compartment, do not use

it for storage purposes. Do not obstruct any purpose

provided ventilation openings.

8. Flammable materials must not be stored in close

proximity to your boiler.

9. Avoid skin contact when your boiler is in operation, as

some surfaces may get hot e.g. pipework.

10. Ensure that the flue terminal, outside the house,

does not become damaged or obstructed, particularly

by foliage.

11. It is important that the condensate drain system is

not blocked, modified or damaged in any way as this

would affect the operation of your boiler. Your installer

should have insulated any exposed pipework.

GB - Heating Industry definition meaning England, Scotland,

Wales, Northern Ireland, Isle of Man and the Channel Isles

4.0 Care of the Boiler

4.1 Cleaning the Outercase

The painted panels should be wiped with a damp cloth

and then dried completely. DO NOT USE ABRASIVE

CLEANING AGENTS.

4.2 Frost Protection

1. The boiler does not have integral frost protection. It

is recommended that the installer fits a suitable

protection device to the system controls if required.

For frost protection the boiler must not be switched

off at the isolation switch on the wall.

5.0 Legislation

8© Baxi Heating UK Ltd 2012

5.1 Installation, Commissioning, Service & Repair

1. This appliance must be install in accordance with the

manufacturer’s instructions and the regulations in force. Read

the instructions fully before installing or using the appliance.

2. In GB, this must be carried out by a competent person as

stated in the Gas Safety (Installation & Use) Regulations.

3. Definition of competence: A person who works for a Gas

Safe registered company and holding current certificates in the

relevant ACS modules, is deemed competent.

4. IN IE (Eire), this must be carried out by a competent person

as stated in I.S. 813 “Domestic Gas Installations”.

Lifting - This product should be lifted and handled by two

people. Stooping should be avoided and protective equipment

worn where necessary. Carrying & lifting equipment should be

used as required, e.g. when installing in a loft space.

All Gas Safe registered engineers carry an ID card with their

licence number and a photograph. You can check your

engineer is registered by telephoning 0800 408 5500 or online

at www.gassaferegistered.co.uk

The boiler meets the requirements of Statutory Instrument

“The Boiler (Efficiency) Regulations 1993 No 3083” and is

deemed to meet the requirements of Directive 92/42/EEC on

the energy efficiency requirements for new hot water boilers

fired with liquid or gaseous fuels:-

Type test for purpose of Regulation 5 certified by:

Notified Body 0086.

Product/Production certified by:

Notified Body 0086.

Ref: 86-BL-647

For GB/IE only.

5.2 Benchmark Commissioning Checklist

1. Please ensure that the installer has fully completed the

Benchmark Checklist on the inside back pages of the

installation instructions supplied with the product and that you

have signed it to say that you have received a full and clear

explanation of its operation. The installer is legally required to

complete a commissioning checklist as a means of complying

with the appropriate Building Regulations (England and

Wales).

2. All installations must be notified to Local Area Building

Control either directly or through a Competent Persons

Scheme. A Building Regulations Compliance Certificate will

then be issued to the customer who should, on receipt, write

the Notification Number on the Benchmark Checklist.

3. This product should be serviced regularly to optimise its

safety, efficiency and performance. The service engineer should

complete the relevant Service Record on the Benchmark

Checklist after each service.

4. The Benchmark Checklist may be required in the event of

any warranty work.

6.0 Notes

10 © Baxi Heating UK Ltd 2012

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Baxi Kessel Handbücher

Baxi

Baxi DUO-TEC MAX+ Bedienungsanleitung

Baxi

Baxi Megaflo 2 System Compact GA Range Versionshinweis

Baxi

Baxi nuvola3 comfort Leitfaden

Baxi

Baxi Main Combi 25 Eco Bedienungsanleitung

Baxi

Baxi Combi 105 HE Versionshinweis

Baxi

Baxi 100 He Benutzerhandbuch

Baxi

Baxi Solo WM 30/4 PF Bedienungsanleitung

Baxi

Baxi Platinum 2 Combi 28 GA Versionshinweis

Baxi

Baxi Bermuda 552 Benutzerhandbuch

Baxi

Baxi Solo HE a series Bedienungsanleitung

Baxi

Baxi Duo-tec Combi HE A Bedienungsanleitung

Baxi

Baxi Slim HP Bedienungsanleitung

Baxi

Baxi Platinum Combi HE A Referenzhandbuch

Baxi

Baxi ECOGEN 24/1.0 Versionshinweis

Baxi

Baxi 100/2 HE Plus Betriebsanleitung

Baxi

Baxi UB 80 INOX Bedienungsanleitung

Baxi

Baxi Bermuda 45/3 E Benutzerhandbuch

Baxi

Baxi Combi 30 HE Montage- und Wartungsanleitung

Baxi

Baxi ROCA NORA 28 Konfigurationshandbuch

Baxi

Baxi BOSTON 70 OF Benutzerhandbuch

Baxi

Baxi PRIME Series Bedienungsanleitung

Baxi

Baxi Megaflo System 15 HE A Benutzerhandbuch

Baxi

Baxi Maxflow Combi WM Benutzerhandbuch

Baxi

Baxi Maxflow Combi WM Benutzerhandbuch

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch