Baxi USense 2 Bedienungsanleitung

Give your customers

completecontrol

Baxi uSense 2 Wired Smart Thermostat Installation guide

Contents

1 Compatibility

2 In the box

3 Before you start

4 Installation

5 OpenTherm hot water control (combi only)

6 Outdoor sensor

7 Technical speciﬁcations

You can ﬁnd more detailed instructions at www.baxi.co.uk

Warning: High Voltage wiring must only be installed

and worked on by a suitably qualified person.

The Baxi uSense  Wired Smart Thermostat is compatible with all appliances using the  V

switched live and also has OpenTherm and RUB capability.

A Gateway & Power Adapter Kit is only required for certain products in the Baxi range, see

the table below.

1. Compatibility

Range Baxi uSense 2

Part Number : 7775937

uSense 2 Gateway &

Power Adapter Kit

(sold separately)

Part Number : 7822453

Baxi 200 Combi 2 Ranges X

Baxi 400 Combi 2 Ranges X

Baxi 600 Combi 2 Ranges X

Baxi 800 Combi 2 Ranges X

Baxi Assure 500 Combi 2 Ranges

Main Eco Compact Ranges

X

All other Baxi, Poerton & Main Combi Ranges





Baxi Split ASHP (Heat Pump)



Baxi Assure Mono ASHP (Heat Pump)



Baxi HP40 Mono 2 AWHP (Heat Pump)



Baxi Assure HP50 Mono 2 AWHP (Heat Pump)



(i) Baxi uSense 2 is Boiler Plus Compliant when ed via OpenTherm or RBUS connecon.

(ii) For mulple zones a Baxi uSense 2, Gateway & Power Adapter Kit is required for each zone.

(iii)This control is NOT compable with System or Heat Only Boilers.

Compa�bility

The Baxi uSense 2 Smart Room Thermostat is compable with

All Baxi, Poerton & Main Combi boilers



Baxi Air Source Heat Pumps (ASHP).

An addional uSense 2 Gateway & Power Adapter Kit Accessory may also be required (see table below)

2. In the box

Room unit package:

1 User guide

2 Room unit

3 Screw and plug ﬁxings

4 Mounting bracket

1 2

3. Before you start

Positioning the uSense :

The room unit must be positioned taking into

account the following factors:

• On an internal wall

• Away from draughts

• 1.2-1.5 m from the ﬂoor

• Not behind doors, bookcases or other objects

• Not in direct sunlight

•

In a room where the user spends most of their time

• Away from heat sources (ﬁreplace, radiators, light,

candles, etc.)

• The maximum cable length from the gateway

to the room unit is 50 m

Prior to installation make sure to:

1. Isolate the power to the heating and control

system and make safe (remove or lock o fuse)

2. Check that the power has been isolated

using suitable test equipment.

Wear appropriate Personal Protection Equipment

e.g. protective gloves, safety footwear etc.

Warning: High Voltage wiring must

only be installed and worked on by

a suitably qualified person.

1.5 m

4. Installation

1. Choose a suitable location for the

uSense 2 thermostat (see Before

you start section on page 5)

2. Remove existing thermostat

(if applicable)

3. Fix the room unit backplate to the wall

using the screws provided

4. Either use existing thermostat wires

or run new wires from the gateway

(there is no polarity - either wire can

be connected to either position)

5. Trim the wires coming out of the wall,

connect them into the connector block on

the room unit backplate

continued opposite

6. Slacken the screws at the sides of the

connectors and insert each wire into the

top at either side of the connector, then

re-tighten the screws

7. Make sure the wires are as ﬂat as possible

against the back plate so that they do

not interfere with the controller when it is

mounted in position

8. Press the room unit onto the backplate until

it clicks into place

9. Connect the other end of the wires

to the R-BUS or OpenTherm terminals in

the boiler (or gateway if ﬁtted). There is no

polarity - either wire can be connected to

either position

10. The connections between the

room unit and boiler or gateway

are low voltage. 230 V will

damage the room unit and

gateway!

5. OpenTherm hot water control

The uSense  room unit will override the hot water temperature controls

on your appliance (OpenTherm only).

1. The room unit will automatically default the hot water temperature to 60 °C

when connected by OpenTherm

2. The room unit will automatically default the heating ﬂow temperature to 80 °C

when connected by OpenTherm

3. These settings can be adjusted to your required comfort level using the uSense 2

room unit only (the appliance controls and App can’t adjust these settings

when the room unit is connected with OpenTherm).

6. Outdoor sensor

Connecting to an outdoor sensor

If an outdoor sensor weather compensator is connected in conjunction

with the uSense  (OpenTherm installations only) you can ONLY adjust the

heating curve on the uSense  App (you CANNOT adjust using the room

unit or appliance controls).

1. Open the Baxi uSense 2 App

2. Click on the installer menu

3. Click on advance settings

4. Enter service code 0012 Remember to re-enter this code to disable

installer access when you ﬁnish adjusting the heating curve

5. You will see a message ‘Your access level has been updated’

6. Click OK

7. Click on heating curve

8. Change the curve to suit the requirements of the user in accordance

with the recommendations of the sensor manufacturer

9. Do not adjust any other settings in the Advanced Feature menu,

as they may aect the correct operation of the appliance

10. Either completely close the App or re-enter the code to cancel the

access level so that your customer can’t adjust important settings.

7. Technical speciﬁcations

Dimensions

Width x height x depth (maximum dimensions)  x  x  mm

Power supply

R-Bus connection voltage  V ± %

Maximum power consumption . W

Electrical connection

Maximum cable length for dedicated room unit R-Bus

 m

Ambient conditions

Storage temperature  -  °C

Relative humidity  -  °C Condensation is not allowed

Operating conditions  -  °C

uSense  room unit

Inhaltsverzeichnis

Andere Baxi Thermostat Handbücher

Baxi

Baxi 5117391 Montageanleitung

Baxi

Baxi TXW1AC Betriebsanleitung

Baxi

Baxi 720644701 Montageanleitung

Baxi

Baxi MAGO wifi Bedienungsanleitung

Baxi

Baxi Luna 3 Comfort Bedienungsanleitung

Baxi

Baxi RD-1200 Bedienungsanleitung

Baxi

Baxi uSense Bedienungsanleitung

Baxi

Baxi RD-1200 Bedienungsanleitung

Baxi

Baxi uSense Bedienungsanleitung

Baxi

Baxi uSense Bedienungsanleitung

Baxi

Baxi 720030501 Handbuch

Baxi

Baxi 7658781 Bedienungsanleitung

Baxi

Baxi uSense Bedienungsanleitung

Baxi

Baxi uSense Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Baxi uSense 2 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken