Bayby BBW 2020 Bedienungsanleitung

Multifunction Baby Bottle Warmer EN

Table of Contents

Introduction ..........................................................2

Safety instructions and important notes .....................................3

Description ...........................................................6

Operation ............................................................8

Cleaning the appliance and removal of limescale deposits ......................11

Technical speciﬁcations ................................................12

Explanation of symbols used on the product, its accessories and packaging ........12

Multifunction Baby Bottle Warmer

Introduction

■The Bayby BBW 2020 Multi-function Baby Bottle Warmer is aunique aid for caring for

and feeding your baby. This single appliance offers 4 functions:

■Baby bottle warmer

– Easy to use for quickly warming up milk.

■Food warmer

– Heats up baby food and other additional food within afew minutes.

■Steam cooking You can also use the steam cooking function to cook meals.

■Sterilises bottles or their accessories.

– Sterilise baby bottles as well as accessories such as baby bottle nipples, lids and

other parts of the baby bottle.

Multifunction Baby Bottle Warmer EN

Safety instructions and important notes

■Only use the baby bottle warmer in accordance

with the instructions included in this user's manual.

Not adhering to these instructions may result in the

incorrect operation of the bottle warmer or its damage.

Keep this user'smanual for future use.

■Only use the appliance indoors and do not expose it or

its accessories to direct sunlight.

■Keep this appliance and the power cord out of reach of

children that are younger than 8 years of age.

■Do not submerge the power cord, plug or the appliance

in water or in any other liquid.

■Do not leave the power cord in the vicinity of hot

surfaces.

■Only connect the appliance to a grounded power

socket. Always check that the plug is properly inserted

into the power socket.

■Before connecting the appliance, check that the

voltage speciﬁed on the bottom part of the appliance

corresponds to the voltage in the local power grid.

■If it is necessary to use an extension cord, check that

the power cord is grounded with anominal value of at

least 10 amperes.

■Do not use the appliance if the power plug, power cord

or the appliance itself is damaged. If the power cord

is damaged, have it replaced at an authorised service

centre to avoid apossibly dangerous situation.

Multifunction Baby Bottle Warmer

■Do not place the appliance on a hot gas or electric

stove or ahot oven or in their vicinity.

■The appliance may be used by children up to 8 years of

age and persons with limited physical, sensory or mental

abilities or by persons with insufﬁcient experience and

knowledge only when under supervision or after they

have been instructed about the safe use of the appliance

and when they are aware of all risks associated with

using the appliance. Cleaning and user maintenance

must not be performed by children younger than than

8 years of age and that are unsupervised. Children

must not play with the bottle warmer.

■Clean the bottle warmer according to the instructions

contained in chapter Cleaning the appliance and

removal of limescale deposits.

■Do not preheat the appliance.

■Hot water may cause serious scalding. So be very

careful when there is hot water inside the bottle warmer.

■Accessible surfaces of the appliance may heat up

during operation. The lid is hot after use, be careful,

scalding hazard.

■Do not move the appliance if it contains hot water.

■As soon as the food or milk reaches the required

temperature, remove the bottle or container from the

bottle warmer. If you leave the food or milk in the bottle

warmer, its temperature will rise.

Multifunction Baby Bottle Warmer EN

■Before you start feeding a child, always check the

temperature of the food.

■Do not touch the bottle warmer if it accidentally falls

into the water. Immediately disconnect the power plug

from the power socket and do not use the appliance.

Contact an authorised service centre.

Attention:

Do not leave the bottle warmer without supervision

when it is connected to apower socket.

■When not using the appliance, disconnect it from the

power socket.

■Before cleaning and after every use, allow the appliance

to cool down.

■Follow the instructions for removing limescale deposits

to prevent irreparable damage.

■Do not attempt to open or repair the appliance

yourself. Have all repairs or adjustments performed at

an authorised service centre. By tampering with the

appliance you risk voiding your legal rights arising from

unsatisfactory performance or quality warranty.

■We recommend saving the original box, packaging

material, receipt and responsibility statement of the

vendor or warranty card for the duration of warranty. It

is appropriate to move the bottle warmer in its original

box.

Multifunction Baby Bottle Warmer

Description

Description of the product

1Lid

2Measuring cup

3Bowl

4Steam grid

5Control panel

6Appliance body

■All parts, except for the stainless steel heating plate, contained inside the body of the

appliance A6are made from amaterial that does not contain BPA (Bisphenol A).

Multifunction Baby Bottle Warmer EN

Description of the control panel

100°C

1Indicator light

2Milk – Function for warming up baby

bottles containing milk

3OFF – Function for turning off the

appliance

4Food – Function for warming up

baby food

5Steam - Function for steam cooking

6100 °C Sterilize - Function for

sterilisation

Multifunction Baby Bottle Warmer

Operation

Attention:

Never use the bottle warmer without water in the heating tank!

■Stand the bottle warmer on ahorizontal and stable surface.

■The steam that is released during the warming process is hot. Keep your hands away

during the warming process.

■Never use the appliance without the steam grid A4located inside the body of the

appliance A6!

Warming up baby bottles

■Pour 110 ml of water into the body of the appliance A6, into which you have placed

the steam grid A4.

■Place the baby bottle inside the body of the appliance A6and close the lid A1of

the bottle warmer. Check that the lid A1has properly adhered to the body of the

appliance A6.

■Always place afully assembled baby bottle into the bottle warmer including its screw

top and nipple (without the dust cap). Make certain that you pour water into the bottle

warmer before turning it on.

■Never allow water to rise above the neck of the bottle or to spill over the edge of the

bottle warmer.

■Check that the control dial on the control panel A5is in the "OFF" position B3and

plug the bottle warmer into apower socket.

■Select the warming method by turning the control dial right towards the symbol

"MILK" B2.

■The indicator light B1signalises that the bottle warmer is running and will shut off

automatically when the temperature in the bottle warmer reaches 40 °C. This is the

expected water temperature around the bottle. This is not the food temperature.

■After reaching 40°C, the water temperature is maintained at the same level until the

appliance is turned off by turning control dial left towards the symbol "OFF" B3.

■If you decide to immediately use the bottle warming function again, it is necessary

to ﬁrst allow the appliance to cool down completely. Other functions of the bottle

warmer operating at higher temperatures – warming up baby food, steam cooking or

sterilisation can be used immediately after warming up baby bottles.

■Always test the food once it reaches the desired temperature, immediately remove it

from the bottle warmer.

■Shake the baby food or milk after taking it out of the bottle warmer. Check the

temperature of the food or milk by dripping alittle on your wrist.

Multifunction Baby Bottle Warmer EN

Note:

The time necessary for warming up the milk depends on the amount of milk being

warmed up and its initial temperature, for example room temperature (20°C) or the

temperature after being removed from a refrigerator (5°C). The time intervals for

warming up glass bottles and polypropylene bottles (PP) may differ.

Heating up baby food

■Pour 110 ml of water into the body of the appliance A6, into which you have placed

the steam grid A4.

■Place the bowl with the food A3or the baby food in aglass jar into the body of the

appliance A6and close the lid A1of the bottle warmer. When warming up baby food

in aglass jar, open the glass jar containing the baby food, remove its lid and any labels.

■Check that the lid A1has properly adhered to the body of the appliance A6.

■Check that the control dial on the control panel A5is in the "OFF" position B3and

plug the bottle warmer into apower socket.

■Select the warming method by turning the control dial right towards the symbol

"FOOD" B4.

■The indicator light B1signalises that the bottle warmer is running and will shut

off automatically when the temperature in the bottle warmer reaches 65°C. This

is the expected water temperature around the food container. This is not the food

temperature.

■After reaching 65°C, the water temperature is maintained at the same level until the

appliance is turned off by turning control dial left towards the symbol "OFF" B3.

■If you decide to immediately use the food warming or bottle warming function again,

which are processes that run at lower lower temperatures, it is necessary to ﬁrst allow

the appliance to cool down completely. Other functions of the bottle warmer operating

at higher temperatures – steam cooking or sterilisation can be used immediately after

warming up baby food.

■After warming up the food, stir it and use aspoon to check that it is not too hot before

serving it to achild.

Note:

The warming time depends on the amount of food being warmed up, its consistency

and its initial temperature, for example room temperature (20°C) or the temperature

after being removed from arefrigerator (5°C).

Steam cooking

■Pour 20 ml of water into the body of the appliance A6, into which you have placed

the steam grid A4.

■On to the steam grid A4, place the food that you have cut up in advance and which

you wish to steam cook, e.g. carrot, broccoli, potatoes, etc.

Multifunction Baby Bottle Warmer

■Close the lid A1of the bottle warmer and check that the lid A1has properly adhered

to the body of the appliance A6.

■Check that the control dial on the control panel A5is in the "OFF" position B3and

plug the bottle warmer into apower socket.

■Select steam cooking function by turning the control dial right towards the symbol

"STEAM" B5.

■The indicator light B1signalises that the bottle warmer is running and will shut off

automatically when the food is cooked.

■When you have ﬁnished steam cooking, turn off the appliance by turning the control

dial left towards the symbol "OFF" B3.

Note:

The cooking time may differ depending on the initial food temperature and its

consistency and amount. The amount of water can be adjusted depending on the

amount of food. If you ﬁnd that the food is not completely cooked, next time you can

pour more water into the bottle warmer.

■If you decide to immediately use the bottle warmer again for any other function, it is

necessary to ﬁrst allow it to cool down completely.

■Be very careful not to scald yourself when removing food from the bottle warmer.

■Before serving the food to achild, check that it is not too hot.

Sterilisation

■Pour 40 ml of water into the body of the appliance A6, into which you have placed

the steam grid A4.

■Place the baby bottle without the nipple, screw ring or cap on to the steam grid A4

with the bottom facing upwards so that the bottle neck points towards the steam

grid A4.

■You may also use the appliance to sterilise accessories such as nipples, dummies,

etc. Place them on the steam grid A4.

■Close the lid A1of the bottle warmer and check that the lid A1has properly adhered

to the body of the appliance A6.

■Check that the control dial on the control panel A5is in the "OFF" position B3and

plug the bottle warmer into apower socket.

■Select the sterilisation function by turning the control dial right towards the symbol

"100 °C STERILIZE" B6.

■The indicator light B1signalises that the bottle warmer is running and will shut off

automatically when sterilisation is complete.

■When you have ﬁnished steam cooking, turn off the appliance by turning the control

dial left towards the symbol "OFF" B3.

■Be very careful not to scald yourself when removing sterilised items from the bottle

warmer, they may be hot.

Inhaltsverzeichnis

Andere Bayby Flaschenwärmer Handbücher

Bayby

Bayby BBW 2030 Bedienungsanleitung

Beliebte Flaschenwärmer Handbücher anderer Marken

Topcom

Topcom KD-4302 Bedienungsanleitung

SEVERIN

SEVERIN BK-3177 Bedienungsanleitung

Philips

Philips SCF355 Bedienungsanleitung

SEVERIN

SEVERIN BK 3176 Bedienungsanleitung

Chicco

Chicco 06867 MU Bedienungsanleitung

Reer

Reer Multimax 2 in 1 -travel Bedienungsanleitung

Lionelo

Lionelo Thermup Go Bedienungsanleitung

TEFAL

TEFAL Disney Baby TD1100K0 Bedienungsanleitung

TrueLife

TrueLife INVIO BW Single Bedienungsanleitung

Gourmia

Gourmia JBW-250 Bedienungsanleitung

König Electronic

König Electronic HC-BW10 Bedienungsanleitung

Gourmia

Gourmia JBW-150 Bedienungsanleitung

NUK

NUK MEDICPRO 10.256.467 Bedienungsanleitung

Petra

Petra DI 6.00 Bedienungsanleitung

Philips AVENT

Philips AVENT Electric Bottle and Baby Food Warmer Bedienungsanleitung

babymoov

babymoov Auto Speed Bib Bedienungsanleitung

Alecto

Alecto BW600 Bedienungsanleitung

Lionelo

Lionelo Thermup Bedienungsanleitung