BCM BC945G Bedienungsanleitung

Intel®Core™2 Duo/

Pentium®D/ Pentium®4/

Pentium®Dual-Core/

Celeron™D

LGA 775

Motherboard

BC945G

User’s Manual v1.1

http://www.bcmcom.com

Declaratio

USER’S NOTICE

THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY

BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY

FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.

THIS MANUAL CONTAINS INFORMATION NECESSARY TO USE OF BC945G MOTHER-

BOARD AND WE HAVE TRY TO INCLUDE IN THIS MANUAL AS MANY INFORMATION

AS POSSIBLE, BUT WE RESERVE RIGHT TO CHANGE, UPDATE ANYTIME WITHOUT

PRIOR NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS ” WITHOUT

WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMANGES FOR LOSS

OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS

OF ANY KIND ALIKE).

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY

NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE

COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION

AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGEMENT.

zIntel, Core2 Duo, Pentium®D, Pentium®4, Pentium®Dual-Core, CeleronD are

registered trademarks of Intel ® Corporation.

zMicrosoft ® and Windows®are registered trademarks of Microsoft ® Corporation.

zAwardBIOS®are registered trademarks of Phoenix Technologies.

WARNING:

Replace your system’s CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin

cell (or equivalent) battery type to avoid risk of personal injury or physical damage to your

equipment. Always dispose of used batteries according to the manufacturer’s instructions, or as

required by the local ordinance (where applicable).

This manual is created and written by BCM Technical Dept., with the information from the

BC945G External Production Specifications, and Intel®82945G Specifications. BCM provides

this manual “AS IS” without warranty of any kind, and will not be liable for any indirect, special,

incidental or consequential damage ( Including damages for loss or profit, loss of business, loss of

use of data, interruption of business and the like). BCM reserve the right to change, correct at any

time without notice. If any comments, suggestions, or errors for this manual, please write an e-mail

to [email protected].

Compliance & Certificate

ISO 9001 Certificate:

This device was produced in our plant with advanced quality system certified by DNV QA Ltd. in

according to ISO 9001. The Certificate is valid for:

DESIGN & MANUFACTURE OF MOTHERBOARD AND PERSONAL COMPUTERS.

CE Declaration:

CE marking is a visible declaration by the manufacturer or his authorized representatives

that the electrical equipment to which it relates satisfies all the provisions of the 1994

Regulations.

FCC Compliance:

FCC stands for Federal Communications Commission.

This product complies with FCC Rules Part 15 and has been tested, and complied with the EMI

rules by a certified body. In normal operation, there shall be no harmful interference caused by this

device nor shall this device accept any interference received, including interference that may cause

undesired operation of this product.

Easy Installatio

The following “Easy Installation” steps are for users accustomed to the

assembly of a computer system. For those individuals requiring more

specific information, please refer to the more detailed descriptions

located within the latter chapters of this manual.

Note: You must keep your power cable unplugged until the following

installation steps are completed.

Getting Started

Touch a grounded metal surface to discharge static electricity stored in

your body before unpacking your motherboard. For details please refer

to Precaution.

Install the CPU by correctly aligning the CPU with the socket LGA775

(refer to CPU Installation Section). Next, install the 1.8 volt un-

buffered DDRII SDRAM into the 240 pin DIMM slots.

Plug in any peripheral card(s) that you want to be included in the

system (Warning : The PCIe-16 slot can only support Video Adaptor

Card, Do not plug in any other device into the PCIe-16 slot).

Plug in all cables included in the package except for the power cord.

Please recheck all steps to ensure no mistakes have been made and then

plug in the power cord and turn on the power to enter the BIOS setup,

Chapter 3.

USER’S NOTICE

MANUAL REVISION INFORMATION 1

COOLING SOLUTIONS 2

CHAPTER 1 INTRODUCTION OF BC945G MOTHERBOARD

1-1 FEATURE OF MOTHERBOARD 3

1-2 SPECIFICATION 4

1-3 LAYOUT DIAGRAM 5

1-4 JUMPER & CONNECTOR LOCATION 6

CHAPTER 2 HARDWARE INSTALLATION

2-1 HARDWARE INSTALLATION STEPS 8

2-2 CHECKING MOTHERBOARD'S JUMPER SETTING 8

2-3 INSTALL 9

2-3-1 GLOSSARY 9

2-3-2 ABOUT INTEL LGA 775-PIN CPU 10

2-4 INSTALL MEMORY 12

2-5 EXPANSION CARD 13

2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION 13

2-5-2 ASSIGNING IRQ FOR EXPANSION CARD 13

2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD 14

2-6 CONNECTORS, HEADERS 15

2-6-1 CONNECTORS 15

2-6-2 HEADERS 18

2-7 STARTING UP YOUR COMPUTER 22

CHAPTER 3 INTRODUCING BIOS

3-1 ENTERING SETUP 23

3-2 GETTING HELP 23

3-3 THE MAIN MENU 24

3-4 STANDARD CMOS FEATURES 25

3-5 ADVANCED BIOS FEATURES 27

3-5-1 CPU FEATURE 30

3-6 ADVANCED CHIPSET FEATURES 32

3-7 INTEGRATED PERIPHERALS 34

3-7-1 CHIPSET IDE DEVICES 34

3-7-2 ONBOARD DEVICE 36

3-7-3 SUPER IO DEVICE 37

3-8 POWER MANAGEMENT SETUP 39

3-8-1 PCI EXPRESS PM FUNCTION 41

3-9 PNP/PCI CONFIGURATION 42

3-9-1 PCI EXPRESS CONFIGURATION 43

3-9-2 I RQ RESOURCES 44

3-10 PC HEALTH STATUS 45

3-10-1 SmartFAN 45

3-11 FREQUENCY /VOLTAGE CONTROL 47

3-12 LOAD MANUFACTUE SETTINGS 47

3-13 SET SUPERVISOR/USER PASSWORD 48

CHAPTER 4 Configure BIOS & Set Onboard SATA RAID

4-1 BIOS SETTING 50

4-2 Intel RAID Utility SETTING 50

MECHANICAL DRAWING 53

TABLE OF CONTENT

Manual Revision Information

Reversion Revision History Date

1.1 Updated CPU support, H/W changes Dec. 2007

1.0 First Release May. 2006

Item Checklist

51 x BC945GV Mainboard

51 x Cable for IDE/Floppy

52 x Serial ATA cable

52 x COM cable with one PCI bracket

51 x CD/ DVD for motherboard utilities

51 x BC945G Quick Reference Guide

51 x BC945G User’s Manual Digital Format on CD

51 x BC945G Standard I/O Shield

□Cable for USB Port 3/4 (Optional)

Intel Pentium 4®Processor Family

Cooling Solutions

As processor technology pushes to faster speeds and higher performance, thermal

management becomes increasingly crucial when building computer systems. Maintaining

the proper thermal environment is key to reliable, long-term system operation. The

overall goal in providing the proper thermal environment is keeping the processor below

its specified maximum case temperature. Heatsinks induce improved processor heat

dissipation through increased surface area and concentrated airflow from attached fans. In

addition, interface materials allow effective transfers of heat from the processor to the

heatsink. For optimum heat transfer, Intel recommends the use of thermal grease and

locking mechanism to attach the heatsink to the processor.

When selecting a thermal solution for your system, please utilize an Intel recommend

heatsink for use with Intel processors. Note, those heatsinks are recommended for

maintaining the specified Maximum T case requirement. In addition, this collection is not

intended to be a comprehensive listing of all heatsinks that support Intel processors.

Please visit Intel website below for CPU installation video :

http://www.intel.com/cd/channel/reseller/asmo-na/eng/100617.htm

Chapter 1

Introduction of BC945G Motherboard

1-1 Feature of motherboard

The BC945G motherboard is design to use with Intel latest Core™ 2 Duo, Pentium®D,

Pentium®4, Pentium®Dual-Core, Celeron™ D LGA775 Processor, with Hyper-

Threading Technology supported, the Intel 945G®Chipset delivers a high performance

long life professional computing platform solution utilize the Socket LGA775 design.

BC945G motherboard use the Intel 945G®Chipset Supports 533/800/1066 MHz System

Bus data transfer rate.

∗Up to 4GB Dual Channel DDR2 Memories. DDR2 is the next generation memory

technology to replace the current DDR. With speeds of 400, 533 and 667 MHz,

DDR2 memory provides bandwidth up to 5.3GB/s. Doubled by the dual-channel

architecture, the widest memory bus bandwidth 10.7GB/s is achieved on this

motherboard.

The ICH7R offers 4 SATA II ports to provide speedier HDD throughout that boost

overall system performance, support RAID 0 (data striping), RAID 1 (mirroring), RAID

0+1 (mirroring stripes), and RAID 5 (byte-level stripping with distributed parity), one

PIDE connection support UDMA33/ATA 66/ATA 100, allows 2 IDE devices connection.

With integrated Intel Graphics Media Accelerator 950 2D/3D supports 400MHz graphics

core, and supports hardware motion compensation assist for software MPEG/DVD decode,

by using a PCIE x16 connector, the BC945G support ADD2 DVI add on card or PCIE x16

graphics adaptor for direct digital output onboard or upgradeable high performance graphics

solution .

The BC945G motherboard include 2 LAN onboard, a 82573 PCI Express Gigabit

Ethernet and one Intel PCI Gigabit 82541 LAN Controller.

Its also has integrated onboard an AC’97 7.1 Realtek ALC883 Audio CODEC, which is

fully compatible with Sound Blaster Pro®that gives you the high definition sound with

back AC97 compatibility.

With USB control as well as capability of expanding to 8 USB2.0 function ports to meet

faster data transfer, built-in hardware monitor function. This enable system monitor and

protect your computer. These motherboards provided design in hardware to protect BIOS

from virus crash BIOS data.

BC945G is really one of the best solution providing high performance & Longevity for

Industrial, Medical Computing Applications.

1-2 Specification

Spec Description

Design ∗ATX form factor 4 layers PCB size: 11.6”(W) x 9.6”(D) (295 x 244

mm)

Chipset ∗Intel®945G Graphics Memory Controller Hub (GMCH) Chipset

34mm x 34mm, 1202 balls.

∗Intel ®82801GR I/O Controller Hub (ICH7R) Chipset 3mm x31mm,

652 balls.

CPU Socket

(PLGA 775 Socket) ∗Support Intel Core™ 2 Duo, Pentium®D, Pentium®4, Pentium®

Dual-Core, Celeron™ D LGA775 processor

∗Support CPU Frequency 533/800/1066 MT/s FSB

Video Display ∗Integrated Intel High Performance Graphics Media Accelerator 950

2D/3D, Graphics Core at 400MHz.

∗Support VGA output up to 2048x1536 @ 75 Hz

∗Support ADD2/ADD2+ card uses PCI Express graphics x16 slots

Memory Socket ∗240-pin DDR2 SDRAM module socket x4

∗Support Memory Type 256Mbit, 512Mbit and 1Gbit Technology

∗Support Only 8x and 16x SDRAM device with 4 banks and also

supports 8 bank, 1-Gbit DDR2 Devices.

∗Support 1.8V DDR2 400 / DDR2 533 / DDR2 667

∗Expandable up to 4GB

Expansion Slot ∗1x PCI Express x16 slot (for PCI Express Graphics Card or ADD2 )

∗5x 32-bit PCI slots

∗1x PCI Express x4 slot

Integrate IDE ∗One PCI IDE controllers support PCI Bus Mastering, ATA

PIO/DMA and the ULTRA DMA 33/66/100 functions that deliver the

data transfer rate up to 100 MB/s

∗Four Serial ATA II host controller

Data transfer up to 3.0Gb/s

Raid Level 0, 1 , 5, 10 support (with ICH7R)

LAN On Board

∗Intel ®82541 PI 10/100/1000 PCI Gbe LAN

∗Intel ®82573E PCI Express Gbe LAN

Audio ∗AC’97 Digital Audio controller integrated

∗AC’97 7.1 Audio CODEC on board

∗Sound Blaster Pro compliant

∗Audio driver and utility included

BIOS ∗Award®4MB Flash ROM

Multi I/O ∗PS/2 keyboard and PS/2 mouse connectors

∗Floppy disk drive connector x1

∗Parallel port x1, Serial port x2 on header

∗USB 2.0 connector x8, (4 on header)

∗Audio connector: Line-in, Line-out, MIC, S/PDIF-IN, S/PDIF-OUT

1-3 System Diagram

BC945G Mainboard Diagram

Andere Handbücher für BC945G

Inhaltsverzeichnis

Andere BCM Hauptplatine Handbücher

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung