BCP SKY5671 Bedienungsanleitung

SKY5671

INSTRUCTION

MANUAL

Upholstered Adjustable

Queen Bed Base

Ver. 3

As shoppers, we’re always trying

to ﬁnd the perfect balance between

quality & value. At BCP, we believe

we’ve achieved that. Our diverse

catalog of everyday essentials is

tailored especially to our customers

& guaranteed to hit that sweet

spot of high quality & low price.

Always.

| 3

PARTS

6 PCS

LEG

1 PC

POWER CORD

1 PC

POWER SUPPLY

2 AAA BATTERIES

(FOR REMOTE)

+AAA -

TOOLS REQUIRED

UP TO 20 MIN.

ASSEMBLY

2 PERSON

ASSEMBLY

NOTICE

•This item is intended for indoor, household use only.

•Ensure that your voltage is consistent with speciﬁcations.

•Do not modify the plug in any way.

•This item is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the item by a person responsible for their safety.

•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made

and/or factory replacement parts are installed.

•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the

product warranty.

• Do not use this item if your physician or healthcare professional has advised against massager use.

• If you experience any pain, illness, or discomfort during use, discontinue using this item and consult

with a physician.

• This product features electrical components. Do not expose to high temperatures or humidity.

• Keep item away from direct sunlight and other heat sources (stove, heater, etc.).

• Do not spill water on the electrical components or connectors.

• Do not touch the plug or operate with wet hands.

• Do not unplug by pulling on the power cord. Always grasp the plug ﬁrmly and pull straight out from

the outlet.

• Do not use if the plug or any components are damaged.

WARNING

Please retain these instructions for future reference.

850 LBS

CAPACITY

LBS

PRODUCT ASSEMBLY

1Remove all packaging and parts from the underside of the bed.

Screw six part A legs into the leg bases.

PARTS

1 PC

RETAINER BAR

1 PC

REMOTE

3With the help of another person, carefully ﬂip the bed onto its legs. Insert the part D retainer

bar into the slots.

Plug the power cord into a wall outlet.

PRODUCT ASSEMBLY

2Insert the part B power cord into the part C power supply, then join the power supply to the

corresponding connector under the bed.

| 5

6 |

1. Control box

2. Head motor2. Head motor

3. Head massage motor

5. Foot massage motor

6. LED lights

7. Leg base 11. USB ports

9. Power supply

10. Pairing button

4. Foot motor 8. Power cord

DIAGRAM

| 7

ADJUST FOOT

CONTROL PANEL

TV LOUNGE ZG

MIN

TIMER/

ALL OFF

MIN

M2 FLAT

HEAD FOOT

MODE

TV PRESET POSITION

ADJUST HEAD

FOOT MASSAGE

HEAD MASSAGE

TIMER

MEMORY PROGRAMMABLE

BUTTONS

ZERO G PRESET POSITION

FLAT POSITION

10/20/30 MINUTE TIMER

INDICATORS

MODE

LIFT HEAD/FOOT

LOWER HEAD/FOOT

FLASHLIGHT

LEDS

LOUNGE PRESET

POSITON

• HEAD MASSAGE: Cycle through 3 intensity levels

• FOOT MASSAGE: Cycle through 3 intensity levels

• LEDS: Toggle under bed LEDs on/o

• TIMER: Cycle through 10/20/30 minute timers, or turn o

- Both 10 & 20 minute lights on indicate 30 minutes

• FLASHLIGHT: Press and hold to turn remote ﬂashlight on

• MODE: Cycle through 3 massage modes

8 |

PAIRING REMOTE

TV LOUNGE ZG

MIN

TIMER/

ALL OFF

MIN

M2 FLAT

HEAD FOOT

MODE

1. Press and hold the adjust head up and adjust foot up buttons.

2. Press and hold the pairing button underneath the bed.

-Pairing button is on the wire attached to the power supply

3. Two beeps will sound to indicate a successful pairing.

The remote comes paired to the bed. If the remote gets unpaired, do the following to pair the remote:

1. Adjust the bed to your desired position.

2. Press and hold the memory programmable button for 5 seconds.

3. Buttons will ﬂash to indicate the position has been saved.

4. If desired, repeat to set the other memory programmable button.

PRESET 1 PRESET 2

TV LOUNGE ZG

MIN

TIMER/

ALL OFF

MIN

M2 FLAT

HEAD FOOT

MODE

TV LOUNGE ZG

MIN

TIMER/

ALL OFF

MIN

M2 FLAT

HEAD FOOT

MODE

SETTING PROGRAMMABLE POSITIONS

NOTE: M1 and M2 buttons do not come programmed. Each button must be individually programmed

before use.

| 9

PRESET POSITIONS

TV SETTING:

Head Angle 44°

Foot Angle 26°

ANTI-SNORE SETTING:

Head Angle 10°

Foot Angle 0°

ZERO GRAVITY (ZG) SETTING:

Head Angle 16°

Foot Angle 35°

10 |

WARNINGS REGARDING BATTERIES

•Do not mix alkaline, standard (carbon zinc) and rechargeable (nickel hydride) batteries.

•Do not mix old and new batteries.

•Non-rechargeable batteries should not be charged.

•Rechargeable batteries should be charged under adult supervision only.

•Exhausted batteries should be removed.

•The supply terminals should not be short-circuited.

•Do not put batteries next to or in a heat source (ﬁre, electronic heating device, etc.).

•Do not hit batteries against hard objects.

•Do not submerge batteries in water.

•Batteries should be inserted with the correct polarity.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

This product may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modiﬁcations to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Responsible party (contact for FCC matters only):

Quality Control Dept.

15101 Red Hill Ave.

Tustin, CA 92780

FCC COMPLIANCE STATEMENT

Inhaltsverzeichnis

Andere BCP Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung