Becker Centronic EasyControl EC415A-III Bedienungsanleitung

Centronic EasyControl

EC415A-III

en Assembly and Operating Instructions

Wall transmitter 5-channel

Important information for:

• Fitters / • Electricians / • Users

Please forward accordingly!

These instructions must be kept safe for future reference.

Becker-Antriebe GmbH

Friedrich-Ebert-Straße 2-4

35764 Sinn/Germany

www.becker-antriebe.com

4034 630 451 021/01/2021

Table of contents

General ................................................................................................... 3

Warranty ................................................................................................. 3

Safety instructions ................................................................................... 4

Intended use ........................................................................................... 5

Explanation of displays and buttons........................................................... 6

Explanation of functions ........................................................................... 8

Commissioning of Centronic ..................................................................... 9

Programming the transmitter.............................................................. 9

Installing the wall bracket.........................................................................14

Changing batteries..................................................................................15

Cleaning.................................................................................................15

Technical data ........................................................................................15

What to do if...?.......................................................................................16

2-en

General

This transmitter allows you to control multiple receivers either in groups or to-

gether via assigned channels.

This device is exceptionally easy to use.

Please observe these Assembly and Operating Instructions when installing

and setting up the equipment.

Explanation of pictograms

CAUTION CAUTION indicates a hazardous situation

which, if not avoided, could result in in-

jury.

ATTENTION ATTENTION indicates measures that must

be taken to avoid damage to property.

Denotes user tips and other useful in-

formation.

Warranty

Structural modifications and incorrect installation which are not in accordance

with these and our other instructions can result in serious injuries, e.g., crush-

ing of limbs. Therefore, structural modifications may only be carried out with

our prior approval and strictly in accordance with our instructions, particularly

the information contained in these Assembly and Operating Instructions.

Any further processing of the products which does not comply with their inten-

ded use is not permitted.

The end product manufacturer and fitter have to ensure that all the relevant

current statutory, official and, in particular, EMC regulations are adhered to

during utilisation of our products, especially with regard to end product manu-

facture, installation and customer advice.

3-en

Safety instructions

General information

•Please keep the instruction manual safe!

•Only use in dry rooms.

•Only use unmodified original parts from the control unit manufacturer.

•Keep children away from control units.

•Observe all pertinent country-specific regulations.

•Dispose of used batteries properly. Only replace the battery with one of

the same type (see Technical Data).

Caution

•Keep people out of the system’s range of travel.

•If the system is controlled by one or more transmitters,

the system’s range of travel must always be visible during

operation.

•Device contains small parts that can be swallowed.

4-en

Intended use

The transmitter described in these instructions must only be used for operat-

ing Centronic-compatible radio drives and radio control units.

•Please note that radio-controlled systems may not be used in areas with

a high risk of interference (e.g. hospitals, airports).

•The remote control is intended solely for use with equipment and sys-

tems in which malfunctions in the transmitter or receiver would not pose

any risk to persons, animals or property, or which contain safety devices

to eliminate such risks.

•The operator is not protected from interference from other telecommu-

nications systems and terminal equipment (e.g. even from radio-con-

trolled systems which are properly operated in the same frequency

range).

•Only connect radio receivers to devices and systems approved by the

manufacturer.

•Ensure that the control unit is not installed or operated

close to metal surfaces or magnetic fields.

•Radio-controlled systems transmitting on the same fre-

quency may cause reception interference.

•Note that the range of the radio signal is limited by legis-

lation as well as by design.

5-en

Explanation of displays and buttons

6-en

1. button

2. button (STOP)

3. Channel/transmission pilot lights

4. button

5. Channel selection button

6. Battery

7. programming button ( )

8. Commissioning LED

9. Wall transmitter

10. Frame

11. Wall bracket

7-en

Explanation of functions

Channel

The channel of a transmitter can be programmed into one or more receivers.

One receiver is operated through an individual command, several receivers

through a group command.

Central command

If all the channels of the transmitter are selected, it is possible to operate all of

the assigned receivers/groups simultaneously.

Channel selection button

Up to 5 channels can be selected using the channel selection button. The indi-

vidual channels are indicated by the corresponding channel indicator lamp

lighting up. If all the channel indicator lamps light up at the same time, a cent-

ral command can be transmitted.

Transmission pilot light

A radio signal is indicated by the transmission pilot light lighting up. The trans-

mission pilot light flashes while transmitting if the battery is getting weak. The

transmission output and range decrease as the battery power declines. If the

transmission pilot light no longer lights up when a button is pressed, the bat-

tery must be replaced.

8-en

Commissioning of Centronic

For the setting of limit positions and configurations please

refer to the instructions for the Centronic receiver.

Explanation of symbols

Up/retract button

STOP button

Down/extend button

Programming button (on the transmitter )

Receiver confirms once or multiple times by

“clicking” or “shifting”

Programming the transmitter

Putting the receiver into programming mode

Follow the Assembly and Operating Instructions for the re-

ceiver.

•Switch off the power supply to the receiver for 5seconds, then switch it

back on.

•Operate the programming button or the radio switch of the receiver.

The receiver is now in programming mode for 3minutes.

9-en

Programming the master transmitter

The master transmitter refers to the very first transmitter

programmed in a receiver. In contrast to subsequently pro-

grammed transmitters, the master transmitter enables,

among other things, the setting of limit positions (for drives

with integrated radio receiver) and the programming or de-

leting of further transmitters. Any transmitter that has separ-

ate UP, STOP, DOWN buttons and a programming button can

be a master transmitter.

If a transmitter is already programmed in the receiver, press

the programming button of the transmitter for 10seconds.

3s Press the programming button of the transmitter

for 3seconds whilst in programming mode.

▻The receiver confirms.

►Programming is now complete.

10-en

Inhaltsverzeichnis

Andere Becker Sender Handbücher

Becker

Becker Centronik SunWindControl SWC441 Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC241 Bedienungsanleitung

Becker

Becker Centronic MemoControl MC415 Bedienungsanleitung

Becker

Becker Centronic MemoControl MC511 Bedienungsanleitung

Becker

Becker CentronicPLUS SWC548 PLUS Bedienungsanleitung

Becker

Becker Centronic EasyControl EC5410A-II Bedienungsanleitung

Becker

Becker Centronic EasyControl EC411-III Bedienungsanleitung

Becker

Becker Centronic VarioControl VC421-II Bedienungsanleitung

Becker

Becker B-Tronic EasyControl EC5415B Bedienungsanleitung

Becker

Becker CentronicPLUS EC5416 PLUS Bedienungsanleitung

Becker

Becker Centronic EasyControl EC142-II Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC245A-II Bedienungsanleitung

Becker

Becker Centronic EasyControl EC411 Bedienungsanleitung

Becker

Becker CentronicPLUS SWC541 PLUS Bedienungsanleitung

Becker

Becker Centronic EasyControl EC242-II Bedienungsanleitung

Becker

Becker CentronicPLUS SWC541A PLUS Bedienungsanleitung

Becker

Becker CentronicPLUS EC541A PLUS Bedienungsanleitung

Becker

Becker CentronicPLUS EC541 PLUS Bedienungsanleitung

Becker

Becker B-Tronic EasyControl EC5401B Bedienungsanleitung

Becker

Becker Centronic MemoControl MC411-III Bedienungsanleitung

Becker

Becker Centronic EasyControl EC411A-III Bedienungsanleitung

Becker

Becker Centronic / B-Tronic EasyControl MC611 Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC442-II Bedienungsanleitung

Becker

Becker Centronic EasyControl EC5410-II Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung