Becker CentronicPLUS EC548A PLUS Bedienungsanleitung

CentronicPLUS

EC548A PLUS, EC5416A PLUS

en Assembly and Operating Instructions

Bi-directional multi-channel hand-held

transmitter

Important information for:

• Fitters / • Electricians / • Users

Please forward accordingly!

These instructions must be kept safe for future reference.

Becker-Antriebe GmbH

Friedrich-Ebert-Straße 2-4

35764 Sinn/Germany

www.becker-antriebe.com

4036 630 299 023/11/2022

Table of contents

General information ................................................................................. 3

Licensing information for open source software.......................................... 3

Warranty ................................................................................................. 4

Safety instructions ................................................................................... 4

Intended use ........................................................................................... 5

Explanation of displays and buttons........................................................... 6

Explanation of functions ........................................................................... 6

Programming transmitter.........................................................................10

Restoring the factory settings of the hand-held transmitter.........................10

Installing the wall bracket.........................................................................11

Changing batteries..................................................................................12

Cleaning.................................................................................................12

Disposal .................................................................................................13

Technical data ........................................................................................13

What to do if...?.......................................................................................14

2-en

General information

Products such as roller shutter and sun protection systems, light controls and

remote-controlled sockets can be operated using the different transmission

channels.

This device is exceptionally easy to use.

Please observe these Assembly and Operating Instructions when installing

and setting up the equipment.

Explanation of pictograms

CAUTION CAUTION indicates a hazardous situation

which, if not avoided, could result in in-

jury.

ATTENTION ATTENTION indicates measures that must

be taken to avoid damage to property.

Denotes user tips and other useful in-

formation.

Licensing information for open source

software

This device uses free/open source software.

The licence texts are enclosed with the product in the licence documentation,

which can be identified by the following symbol:

The licence texts for the licensed software being used can be downloaded

from www.becker-antriebe.com/licenses.

3-en

Written request for the licence texts:

Becker-Antriebe will, on request, provide the licence texts for the licensed

software being used at cost price, either on a USB stick or a similar data car-

rier. Please send an email to the following email address for more information:

licenses@becker‑antriebe.com

Warranty

Structural modifications and incorrect installation which are not in accordance

with these and our other instructions can result in serious injuries, e.g., crush-

ing of limbs. Therefore, structural modifications may only be carried out with

our prior approval and strictly in accordance with our instructions, particularly

the information contained in these Assembly and Operating Instructions.

Any further processing of the products which does not comply with their inten-

ded use is not permitted.

The end product manufacturer and fitter have to ensure that all the relevant

current statutory, official and, in particular, EMC regulations are adhered to

during utilisation of our products, especially with regard to end product manu-

facture, installation and customer advice.

Safety instructions

General information

•Please keep the instruction manual safe!

•Only use in dry rooms.

•Only use unmodified original parts from the control unit manufacturer.

•Keep children away from control units.

•Observe all pertinent country-specific regulations.

•Dispose of used batteries properly. Only replace the battery with one of

the same type (see Technical Data).

Caution

•Keep people out of the system’s range of travel.

•If the system is controlled by one or more transmitters,

the system’s range of travel must always be visible during

operation.

•Device contains small parts that can be swallowed.

4-en

Intended use

The transmitter described in these instructions must only be used indoors for

the operation of radio drives and radio control units that are compatible with

the CentronicPlus.

•Please note that radio-controlled systems may not be used in areas with

a high risk of interference (e.g. hospitals, airports).

•The remote control is intended solely for use with equipment and sys-

tems in which malfunctions in the transmitter or receiver would not pose

any risk to persons, animals or property, or which contain safety devices

to eliminate such risks.

•The operator is not protected from interference from other telecommu-

nications systems and terminal equipment (e.g. even from radio-con-

trolled systems which are properly operated in the same frequency

range).

•Only connect radio receivers to devices and systems approved by the

manufacturer.

•Ensure that the control unit is not installed or operated

close to metal surfaces or magnetic fields.

•Radio-controlled systems transmitting on the same fre-

quency may cause reception interference.

•Note that the range of the radio signal is limited by legis-

lation as well as by design.

5-en

Explanation of displays and buttons

1. LED ring

2. button

3. button (STOP)

4. button

5. function button

6. Battery compartment

7. programming button

Explanation of functions

LED ring

Display of:

•Confirmations from receiver

•Channel selection

•manual/ automatic

•Threshold/ dimming values

•Battery status

•Visual support during commissioning

6-en

Keypad , ,

•Drive commands

•Memory function

•Intermediate position I + II

Function button

•Channel selection/ Group selection/ Central command

Programming button

•Environment scan, as well as selection and programming of receivers

•Add and remove receivers to/from the installation

•Restore factory settings

•Add additional transmitters to the installation

Channel selection/ Group selection/ Central command

The channel of a transmitter can be programmed into one or more receivers.

Only the channels in which receivers are programmed are displayed. One

channel is activated through an individual command, several channels through

a group command or central command.

One group has a maximum of 4 channels and is assigned a colour.

Depending on the model/ specification of the transmitter, several groups can

be selected.

One quarter of the LED ring lights up to indicate each of the individual chan-

nels. A group consists of four channels which are represented by different col-

ours.

If the entire LED ring lights up in one of the group colours, this group is selec-

ted. With the group command, all channels of the selected group are activ-

ated.

If the entire LED ring lights up white, the central command is selected. With the

central command, all channels of all groups are activated.

Channel 1 Channel 2 Channel 3 Channel 4 Group Central

command

7-en

8-channel hand-held transmitter

Channel Group Colour

LED ring

Channel 1 - 4 Group 1 green

Channel 5 - 8 Group 2 red

Channel 1 - 8 Group all

(central command)

White

16-channel hand-held transmitter

Channel Group Colour

LED ring

Channel 1 - 4 Group 1 green

Channel 5 - 8 Group 2 red

Channel 9 - 12 Group 3 yellow

Channel 13 - 16 Group 4 light blue

Channel 1 - 16 Group all

(central command)

White

manual/ automatic

You can display and select the "Manual" or "Automatic" setting by pressing the

STOP button. Only manual drive commands and emergency signals can be

performed with the "Manual" setting. In addition, automatic drive commands

are also performed in the "Automatic" setting. The automatic functions are not

interrupted if a manual drive command is carried out when in automatic mode.

3s Press the STOP button for 3seconds to display

the current status.

Automatic

mode:

The LED ring lights up green.

Manual mode: The LED ring lights up red.

Different

modes:

The LED ring lights up yellow.

8-en

5s You can toggle between manual and automatic

mode by pressing the STOP button for 5seconds.

Battery status

Battery status low

LED ring flashes yellow 4 times following normal

feedback.

Battery status empty

LED ring flashes red 4 times following normal

feedback.

Memory function

The memory function can save one switching time for a and run respect-

ively, and repeat every 24 hours.

Whether or not this function is available depends on the devices used and is

described in the relevant instructions for the receiver.

Intermediate position I + II

The intermediate positions I + II are freely selectable positions for the shading

solution between the two limit positions. Each travel button can be assigned

one intermediate position. Both limit positions must be set before an interme-

diate position is set.

Whether or not this function is available depends on the devices used and is

described in the relevant instructions for the receiver.

Installation key

All of the devices operating within an installation must have the same installa-

tion key in order to communicate with one another. This key is created on ini-

tial commissioning, and is then transmitted to the additional added devices.

The installation key is only known to the programmed devices, and cannot be

read off. The commissioning procedure is described in the relevant instruc-

tions for the receiver.

9-en

Programming transmitter

Please find the appropriate description in the instructions for the receiver.

Restoring the factory settings of the

hand-held transmitter

When the factory settings of the transmitter are restored,

the settings in the receiver, such as run times, thresholds,

intermediate positions, etc. as applicable, are not taken into

account.

Open the cover of the battery compartment and

take out the batteries.

After approx. 3s, press and hold down the pro-

gramming button.

Re-insert the batteries while keeping the program-

ming button pressed down.

▻

The transmitter confirms with 4 yellow

flashes of the LED ring.

10-en

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Becker Sender Handbücher

Becker

Becker CentronicPLUS EC548 PLUS Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC411 Bedienungsanleitung

Becker

Becker Centronic VarioControl VC421-II Bedienungsanleitung

Becker

Becker Centronic VarioControl VC421 Bedienungsanleitung

Becker

Becker Centronic EasyControl EC5410A-II Bedienungsanleitung

Becker

Becker Centronic / B-Tronic EasyControl MC611 Bedienungsanleitung

Becker

Becker CentronicPLUS SWC541A PLUS Bedienungsanleitung

Becker

Becker Centronic MemoControl MC441 Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC241-II Bedienungsanleitung

Becker

Becker B-Tronic EasyControl EC5415B Bedienungsanleitung

Becker

Becker Centronic EasyControl EC5410-II Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC442-II Bedienungsanleitung

Becker

Becker Centronic EasyControl EC141-II Bedienungsanleitung

Becker

Becker CentronicPLUS EC541 PLUS Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC441-II Bedienungsanleitung

Becker

Becker CentronicPLUS EC541A PLUS Bedienungsanleitung

Becker

Becker Centronic SunWindControl SWC241 Bedienungsanleitung

Becker

Becker Centronic MemoControl MC511 Bedienungsanleitung

Becker

Becker Centronic EasyControl EC415A-III Bedienungsanleitung

Becker

Becker Centronic EC548 Plus Bedienungsanleitung

Becker

Becker EasyControl EC711 Bedienungsanleitung

Becker

Becker Centronic EasyControl EC411A-III Bedienungsanleitung

Becker

Becker Centronic SunWind Control SWC241A-II Bedienungsanleitung

Becker

Becker CentronicPLUS SWC541 PLUS Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung