Beckhoff CU8803-000 Series Bedienungsanleitung

Manual | EN

CU8803-000x

Transmitter box for CP-Link 4

2023-08-21 | Version: 2.0

Table of contents

CU8803-000x 3Version: 2.0

Table of contents

1 Notes on the documentation....................................................................................................................5

2 For your safety ..........................................................................................................................................6

2.1 Signal words......................................................................................................................................6

2.2 Intended use .....................................................................................................................................6

2.3 Fundamental safety instructions .......................................................................................................7

2.3.1 Special requirements (ATEX)............................................................................................. 7

2.3.2 Special requirements (IECEx)............................................................................................ 8

2.4 Operator's obligation to exercise diligence........................................................................................8

3 Product overview ......................................................................................................................................9

3.1 Structure............................................................................................................................................9

3.1.1 USB input .........................................................................................................................10

3.1.2 DVI input .......................................................................................................................... 10

3.1.3 CP-Link 4 output .............................................................................................................. 11

3.1.4 Power supply.................................................................................................................... 12

3.2 Name plate......................................................................................................................................13

4 Commissioning .......................................................................................................................................14

4.1 Transport and unpacking ................................................................................................................14

4.2 Control cabinet installation ..............................................................................................................15

4.3 Connect transmitter box ..................................................................................................................16

5 Decommissioning ...................................................................................................................................18

6 Maintenance ............................................................................................................................................20

7 Technical data .........................................................................................................................................21

8 Appendix..................................................................................................................................................22

8.1 Service and support ........................................................................................................................22

8.2 Approvals ........................................................................................................................................23

Table of contents

CU8803-000x4 Version: 2.0

Notes on the documentation

CU8803-000x 5Version: 2.0

1 Notes on the documentation

This description is only intended for the use of trained specialists in control and automation engineering who

are familiar with the applicable national standards.

The following instructions and explanations must be followed during installation and commissioning of the

components. The responsible staff must ensure that the application or use of the products described satisfy

all the requirements for safety, including all the relevant laws, regulations, guidelines and standards.

Disclaimer

The documentation has been prepared with care. The products described are, however, constantly under

development. For that reason the documentation is not in every case checked for consistency with

performance data, standards or other characteristics. In the event that it contains technical or editorial errors,

we retain the right to make alterations at any time and without warning. No claims for the modification of

products that have already been supplied may be made on the basis of the data, diagrams, and descriptions

in this documentation. All illustrations shown are only examples. The configurations depicted may deviate

from the standard.

Trademarks

Beckhoff®, TwinCAT®, TwinCAT/BSD®, TC/BSD ®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®,

Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered and licensed trademarks of

Beckhoff Automation GmbH.

Other designations used in this publication may be trademarks whose use by third parties for their own

purposes could violate the rights of the owners.

Patents

The EtherCAT Technology is covered, including but not limited to the following patent applications and

patents: EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702 and similar applications and

registrations in several other countries.

grant of a patent, utility model or design.

Delivery state

All the components are supplied in particular hardware and software configurations appropriate for the

application. Changes to the hardware or software configuration are permitted, provided they are within the

specified limits for power consumption and power loss (please refer to the respective data sheet).

Currentness

Please check whether you are using the current and valid version of this document. The current version is

always available for download from the Beckhoff website. In case of doubt, contact Technical Support.

Delivery conditions

In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply.

For your safety

CU8803-000x6 Version: 2.0

2 For your safety

The Safety chapter first explains the safety symbols used in the documentation and their meanings. They

contain fundamental safety instructions that are essential for the avoidance of personal injuries and damage

to property.

Exclusion of liability

Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the

devices outside the documented operating conditions.

2.1 Signal words

The signal words used in the documentation are classified below.

Warning of personal injuries

DANGER

Hazard with high risk of death or serious injury.

WARNING

Hazard with medium risk of death or serious injury.

CAUTION

There is a low-risk hazard that can result in minor injury.

Warning of property and environmental damage

NOTICE

There is a possibility of damage to the environment, equipment or data.

2.2 Intended use

The CP-Link4 transmitter box CU8803-000x is designed for DIN rail mounting in control cabinets of machine

and system engineering. It is used to operate a Control Panel CP29xx-0010, CP39xx-0010 or

CPX39xx-0010 at a distance of up to 100m from the industrial PC. The transmitter box can be used in

hazardous areas and is ATEX and IECEx certified.

The transmitter box is designed for a working environment that meets the IP20 protection rating. This

involves finger protection and protection against solid foreign objects up to 12.5mm. There is no protection

against water. Operation of the devices in wet and dusty environments is not permitted.

The specified limits for technical data must be adhered to.

The transmitter box can be used within the documented operating conditions.

Improper use

Do not use the transmitter box outside the documented operating conditions.

For your safety

CU8803-000x 7Version: 2.0

2.3 Fundamental safety instructions

The following safety instructions must be observed when handling the transmitter box.

Application conditions

• Do not use the transmitter box under extreme environmental conditions.

• Only use the transmitter box in hazardous areas if it is explicitly designed for this purpose.

• Never plug or unplug connectors during thunderstorms. There is a risk of electric shock.

• Provide protective grounding for the transmitter box.

Damage to property and impairment of functions

• Ensure that only trained specialists with a control and automation engineering background, operate the

PC to which the transmitter box is connected. Use by unauthorized persons can lead to damage to

property.

• Fuse the power supply line with max. 16A. The fuse serves to protect the supply line in the event of a

short circuit.

• In case of fire, extinguish the transmitter box with powder or nitrogen.

2.3.1 Special requirements (ATEX)

WARNING

Risk of explosion

Gases can be ignited in hazardous areas. Read and follow the safety instructions to avoid deflagration or

explosion.

The device must be installed in a suitable housing with IP54 protection rating according to EN 60079-15,

taking into account the environmental conditions in which the device will be used.

Precautions are to be taken to prevent the nominal voltage from being exceeded by transient disturbances in

excess of 119V.

Observe the permissible ambient temperature range of 0-55°C for the use of CU8803 in hazardous areas.

Secure the USB connector to the bracket with cable ties.

The device may only be used in an area with a maximum degree of pollution of 2 according to IEC 60664-7.

For your safety

CU8803-000x8 Version: 2.0

2.3.2 Special requirements (IECEx)

WARNING

Risk of explosion

Gases can be ignited in hazardous areas. Read and follow the safety instructions to avoid deflagration or

explosion.

The device must be installed in a suitable housing with IP54 protection rating according to EN 60079-15,

taking into account the environmental conditions in which the device will be used.

Precautions are to be taken to prevent the nominal voltage from being exceeded by transient disturbances in

excess of 119V.

Observe the permissible ambient temperature range of 0-55°C for the use of CU8803 in hazardous areas.

Secure the USB connector to the bracket with cable ties.

The device may only be used in an area with a maximum degree of pollution of 2 according to IEC 60664-7.

2.4 Operator's obligation to exercise diligence

The operator must ensure that

• the products are only used as intended (see chapter 2.2 Intended use [}6]).

• the products are only operated in sound condition and in working order.

• only sufficiently qualified and authorized personnel operate the PC to which the transmitter box is

connected.

• the personnel is instructed regularly about relevant occupational safety and environmental protection

aspects, and is familiar with the operating instructions and in particular the safety instructions contained

herein.

• the operating instructions are in good condition and complete, and always available for reference at the

location where the products are used.

Product overview

CU8803-000x 9Version: 2.0

3 Product overview

The CU8803-000x CP-Link4 transmitter box enables the control panel to be located up to 100m away from

the industrial PC. The transmitter box is located at a maximum distance of 1m from the industrial PC and

must be supplied with 24VDC. It transmits DVI, USB and the power supply to the control panel via a Cat.6A

cable (The One Cable Display Link).

The CU8803-0000 transmitter box is designed for connecting the Control Panels CP29xx-0010,

CP39xx-0010 and CPX39xx-0010 to a PC with a DVI port.

The CU8803-0001 transmitter box is designed for connecting the Control Panels CP29xx-0010 and

CP39xx-0010 to a C60xx PC or an ATX PC with DisplayPort.

3.1 Structure

The figure shows an example of a CU8803-0000 transmitter box.

Fig.1: Structure

Table1: Legend - CU8803 structure

No. Component Description

1 Power supply (X40) Power supply connection

2 FCC approval text FCC approvals for the United States of America and

Canada

3 Vendor Beckhoff Automation GmbH & Co. KG

4 Model Ending -0000: Device with DVI cable

Extension -0001: Device with DisplayPort cable

5 USB input (X10) Connection to the industrial PC

6 DVI input (X20) Connection to the industrial PC

7 CP-Link 4 output (X30) Transmission of DVI, USB and power supply to the

control panel

Product overview

CU8803-000x10 Version: 2.0

3.1.1 USB input

The transmitter box has a USB 2.0 input (X10) with socket type B. The transmitter box is connected to the

industrial PC via the USB input. The maximum cable length is 1 m.

2 1

X10

Fig.2: USB input pin numbering

Table2: USBinput pin assignment

Pin Assignment

1 Vbus

2 D -

3 D +

4 GND

3.1.2 DVI input

The transmitter box has a DVI input (X20). The transmitter box is connected to the industrial PC via the DVI

input. The maximum cable length is 1 m.

X20

Fig.3: DVI input pin numbering

Table3: DVI Extended interface pin assignment

Pin Assignment Pin Assignment Pin Assignment

1 TDMS Data 2 - 9 TDMS Data 1 - 17 TDMS Data 0 -

2 TDMS Data 2 + 10 TDMS Data 1 + 18 TDMS Data 0 +

3 TDMS Data 2/4 Shield 11 TDMS Data 1/3 Shield 19 TDMS Data 0/5 Shield

4 not used 12 not used 20 not used

5 not used 13 not used 21 not used

6 DDC Clock 14 + 5 V Power 22 TDMS Clock Shield

7 DDC Data 15 Ground (+ 5 V, Analog H/V

Sync)

23 TDMS Clock +

8 Analog Vertical Sync 16 Hot Plug Detect 24 TDMA Clock -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Beckhoff Sender Handbücher

Beckhoff

Beckhoff CU8803-0000 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung