Beckhoff CU8110-0060 Bedienungsanleitung
Manual | EN
CU8110-0060
Uninterruptible Power Supply (Capacitive)
2024-01-23 | Version: 1.0
Table of contents
CU8110-0060 3Version: 1.0
Table of contents
1 Notes on the documentation....................................................................................................................5
1.1 Representation and structure of warnings ........................................................................................6
1.2 Documentation issue status ..............................................................................................................7
2 Safety .........................................................................................................................................................8
2.1 Intended use .....................................................................................................................................8
2.2 Staff qualification...............................................................................................................................8
2.3 Safety instructions.............................................................................................................................8
3 Transport and storage ............................................................................................................................10
4 Product overview ....................................................................................................................................11
4.1 Structure..........................................................................................................................................11
4.2 Name plate......................................................................................................................................12
4.3 Block diagram .................................................................................................................................13
4.4 Holding times ..................................................................................................................................14
5 Interfaces .................................................................................................................................................15
5.1 USB 2.0 interface (X101) ................................................................................................................15
5.2 Power supply (X102).......................................................................................................................16
6 Commissioning .......................................................................................................................................17
6.1 Assembly.........................................................................................................................................17
6.1.1 Fastening to the DIN rail .................................................................................................. 18
6.1.2 Installing the mounting plate (optional) ............................................................................ 19
6.2 Power supply...................................................................................................................................20
6.3 Communication ...............................................................................................................................22
6.3.1 Connection via UPS-OCT ................................................................................................ 22
6.3.2 Connecting additional devices ......................................................................................... 23
6.3.3 Connection via USB .........................................................................................................24
6.3.4 Connection via digital I/O ................................................................................................. 25
7 Configuration...........................................................................................................................................26
7.1 Install UPS software........................................................................................................................26
7.2 System behavior .............................................................................................................................27
7.3 UPS configuration dialogs...............................................................................................................30
7.3.1 Device configuration dialog .............................................................................................. 31
7.3.2 Alarm configuration dialog................................................................................................ 33
7.4 Configuring the UPS .......................................................................................................................36
7.5 TwinCAT interface...........................................................................................................................38
7.5.1 FB_GetUPSStatus ...........................................................................................................38
7.5.2 ST_UPSStatus .................................................................................................................40
7.5.3 E_BatteryStatus ...............................................................................................................43
7.5.4 E_UpsCommStatus.......................................................................................................... 43
7.5.5 E_UpsPowerStatus .......................................................................................................... 44
8 Error handling and diagnostics .............................................................................................................45
9 Care and maintenance............................................................................................................................46
10 Decommissioning ...................................................................................................................................47
Table of contents
CU8110-00604 Version: 1.0
10.1 Dismantling the UPS .......................................................................................................................47
10.2 Disposal ..........................................................................................................................................48
11 Technical data .........................................................................................................................................49
12 Appendix..................................................................................................................................................51
12.1 Accessories.....................................................................................................................................51
12.2 Support and Service........................................................................................................................52
Notes on the documentation
CU8110-0060 5Version: 1.0
1 Notes on the documentation
This description is intended exclusively for trained specialists in control and automation technology who are
familiar with the applicable national standards.
For installation and commissioning of the components, it is absolutely necessary to comply with the
documentation and the following notes and explanations.
The qualified personnel is always obliged to use the currently valid documentation.
The responsible staff must ensure that the application or use of the products described satisfies all safety
requirements, including all the relevant laws, regulations, guidelines, and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under
development.
We reserve the right to revise and change the documentation at any time and without notice.
No claims to modify products that have already been supplied may be made on the basis of the data,
diagrams, and descriptions in this documentation.
Trademarks
Beckhoff®, TwinCAT®, TwinCAT/BSD®, TC/BSD®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®,
Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered and licensed trademarks of
Beckhoff Automation GmbH.
If third parties make use of designations or trademarks used in this publication for their own purposes, this
could infringe upon the rights of the owners of the said designations.
Patents
The EtherCAT Technology is covered by the following patent applications and patents, without this
constituting an exhaustive list:
EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702
and similar applications and registrations in several other countries.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH,
Germany
Copyright
© Beckhoff Automation GmbH & Co. KG, Germany.
The distribution and reproduction of this document, as well as the use and communication of its contents
without express authorization, are prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event that a patent, utility
model, or design are registered.
Notes on the documentation
CU8110-00606 Version: 1.0
1.1 Representation and structure of warnings
The following warnings are used in the documentation. Read and follow the warnings.
Warnings relating to personal injury:
DANGER
Hazard with high risk of death or serious injury.
WARNING
Hazard with medium risk of death or serious injury.
CAUTION
There is a low-risk hazard that can result in minor injury.
Warnings relating to damage to property or the environment:
NOTICE
There is a potential hazard to the environment and equipment.
Notes showing further information or tips:
This notice provides important information that will be of assistance in dealing with the product or
software. There is no immediate danger to product, people or environment.
Notes on the documentation
CU8110-0060 7Version: 1.0
1.2 Documentation issue status
Version Modifications
1.0 First version.
Safety
CU8110-00608 Version: 1.0
2 Safety
Read the chapter on safety and follow the instructions in order to protect from personal injury and damage to
equipment.
Limitation of liability
All the components are supplied in particular hardware and software configurations appropriate for the
application. Unauthorized modifications and changes to the hardware or software configuration, which go
beyond the documented options, are prohibited and nullify the liability of Beckhoff Automation GmbH & Co.
KG.
In addition, the following actions are excluded from the liability of Beckhoff Automation GmbH & Co. KG:
• Failure to comply with this documentation.
• Improper use.
• Assignment of untrained personnel.
• Use of unauthorized replacement parts.
• Use of the devices in a damaged condition.
2.1 Intended use
The CU8110-0060 UPS is intended for mounting on a DIN rail in an industrial control cabinet or terminal box.
Alternatively, the UPS can be equipped with a mounting plate and mounted on the rear panel of the control
cabinet. The UPS supports in particular Industrial PCs, Embedded PCs, Panels and Panel PCs in case of
voltages fluctuations or failures and this way ensures a safe shutdown of the system.
The UPS has been developed for a working environment that satisfies protection class IP20. This involves
finger protection and protection against solid foreign objects up to 12.5 mm, but not protection against water.
Operation of the devices in wet and dusty environments is not permitted. The specified limits for electrical
and technical data must be adhered to.
The CU8110-0060 UPS is maintenance-free. The energy module (EDLC) does not need to be replaced even
after several decades.
Improper use
The UPS is not suitable for operation in the following areas:
• Potentially explosive atmospheres.
• In areas with an aggressive environment that is enriched, for example, with aggressive gases or
chemicals.
• Living areas. In living areas, the relevant standards and guidelines for interference emissions must be
adhered to, and the devices must be installed in housings or control boxes with suitable attenuation of
shielding.
2.2 Staff qualification
All operations involving Beckhoff software and hardware may only be carried out by qualified personnel with
knowledge of control and automation engineering. The qualified personnel must have knowledge of the
administration of the Industrial PC and the associated network.
All interventions must be carried out with knowledge of control programming, and the qualified personnel
must be familiar with the current standards and guidelines for the automation environment.
2.3 Safety instructions
Follow the safety instructions for protection against injuries and prevention of damage to equipment or
property.
Safety
CU8110-0060 9Version: 1.0
Assembly
• Never work on live equipment. Always switch off the power supply for the device before installation,
troubleshooting or maintenance. Protect the device against unintentional switching on.
• Avoid polarity reversal of the data and supply cables, as this may cause damage to the equipment.
• Observe the relevant accident prevention regulations for your machine (e.g. the BGV A 3, electrical
systems and equipment).
• Note the temperature limit values for operation. If the UPS is operated outside of these temperature
limit values, electrolyte can escape, heat up or in the worst case explode.
• The UPS location must be adequately ventilated. In case of a fault, the UPS can release flammable
gases that could cause an explosion.
• Do not store the UPS in an airtight container or bag. The battery pack can release gases that could
explode if the UPS is kept in an airtight enclosure.
• If you come into contact with electrolyte, rinse the affected body part immediately with water.
Firefighting
Extinguish the battery pack with dry powder, halon or CO2.
• Do not extinguish with water.
• Disconnect the power supply.
• During firefighting wear self-contained respiratory protective equipment and protective clothing.
• Air the room after you have extinguished the UPS.
Safety labels on the UPS
The following safety labels are attached to the name plate of the UPS:
Transport and storage
CU8110-006010 Version: 1.0
3 Transport and storage
NOTICE
Short circuit due to moisture
Moisture can form during transport in cold weather or in the event of large temperature fluctuations. Leave
the device to adjust to room temperature slowly. If condensation has occurred, wait at least 12 hours before
switching on the device.
Transport
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts.
Therefore, during transport please protect your device from:
• mechanical stress and
• use the original packaging.
Table1: Dimensions and weight
CU8110-0060
Dimensions (W x H x D) 50 mm x 100 mm x 90 mm
Weight approx. 425g
Storage
Observe the following storage conditions, in order to maintain the service life of the UPS:
• Store the UPS at room temperature or below.
• Do not store the UPS in a dusty environment, at high humidity or in location with strong vibrations.
Inhaltsverzeichnis
Andere Beckhoff UPS Handbücher
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
