BeeWi BC7PW Bedienungsanleitung
v1
HD Wi-Fi Camera
BC7PW
USER GUIDE / GUIDE D’UTILISATION / BENUTZERLEITFADEN
ISTRUZIONI PER L’USO / GUÍA DE UTILIZACIÓN
GUIA DE UTILIZAÇÃO / GEBRUIKSGIDS
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ / PODRĘCZNIK UŻYTKOWNIKA
BC7PW
BeeWi CamPad application:
User’s guide
4
13
22
ENGLISH
FRANCAIS
POLSKI
4
ENGLISH
Thank you for purchasing the Smart Wi-Fi HD Camera from BEEWI. Please read the
following instructions to learn how to configure and use more effectively your product
The BeeWi HD IP Camera is an integrated indoor IP Camera developed specifically for
network video applications.
1. PRODUCT DESCRIPTION
1.1. Product Outlook
1 - Microphone
2 - Lens
3 - Dummy button – do not use
4 - LED
5 - Reset button
6 - Micro USB
7 - Speaker
8 - QR code
1.2. Package Content
• Camera
• Micro USB Charger
• Legal Guide
• Quick Start Guide
• Screws
1.3. Main features
• High Definition 720p Video
• Video Live streaming through app
• Microphone and Speaker for conversation
• Real plug and play, easy set up in 5 minutes
• Distant Alerts
• IR night vision (not supported on this model)
• Outdoor use (not supported on this model)
1.4. Specifications
Wi-Fi 802.11b/g/n up to 150Mbps, 2.4 GHz Frequency,
WEP, WPA, WPA2, WPA/PSK, WPA2/PSK security encryption
Image Adjustable brightness, contrast, horizontal & vertical rotation.
1280 x 720 / 640 x 480 / 320 x 240 resolutions
Sensor f=2.5mm, F=2.0 ¼”
Power 100-240V, 50/60Hz 0.3A Input, 5V 0.8A Output
Dimensions 99 x 60 x 60mm / 3.90 x 2.36 x 2.36’’
Weight 272g / 9.6 Oz
3
5
6
4
1
2
7
8
5
1.5. Compatibility
• iOS mobile device with iOS 4.3 minimum
• Android mobile device with Android 2.2 minimum
• PC with Windows or MAC.
• Email address for receiving alert notifications
• 2.4 GHz Wi-Fi network (name and password) and high-speed Internet connection
(DSL, Cable, FIOS) with a minimum 1 Mbit/sec upload speed.
1.6. Warnings
Before installation please check your internet speed. Get your Wi-Fi username and
password and if they contain the special characters “&” and ‘, please remove them
before set-up (change password). Set WPA2-PSK (AES) Encryption, channel 6 and check
if the DHCP switch is on.
Place your camera at maximum 15m / 50ft distance from router and close to a DC Plug.
Users can extend Wi-Fi signal with Wi-Fi extenders and get a longer power cord, if
needed. Check the quality of the video before final mounting. For indoor installations,
the range might be less if metal objects or thick walls and ceilings are between the
camera and the router. Quality is affected also by the number of devices connected to
the network and by interferences from other networks/devices. If video quality is not
good, we advise to position the camera closer to the router.
Users can place indoor cameras in protected outdoor areas (such as a covered porch) if
it remains dry and within its operating temperature range of -10°C to 50°C degrees. The
camera is not waterproof and any exposure to moisture and/or temperatures outside the
operating range will void our one-year limited warranty. Users can guard outdoors by
placing the camera behind a window, making sure to switch on the outdoor lights.
As stated above.Do not aim the camera at a strong light source, as it may cause
overexposure of pictures, and may affect the longevity of the camera’s sensors.
Ensure that the camera is placed in a ventilated area to prevent overheating.
2. CAMPAD APP FOR IOS AND ANDROID
2.1. Download and install app from Application Store:
Go to the App Store or Google Play and search “BeeWi CamPad”.
Or got to our website: http://www.bee-wi.com/applications-et-serveurs/campad
If you have already downloaded CamPad in the past, then go to your application store
to make sure you have the latest version.
2.2 Unpack Plug and install the Camera
Before you fix camera on the wall or ceiling with screws, we recommend that you first
connect to your Wi-Fi network and check that the camera works fine where you want to
install it. Sometimes, thick walls or places with a lot of Wi-Fi networks can affect your
home Wi-Fi signal.
If you cannot connect the camera in the designated space, we recommend that you
place it near your router within 3 feet and then try different spots.
Once camera is properly set and working, you can fix camera.
ENGLISH
6
ENGLISH
The screws provided in the pack are not convenient for all walls, please check a
specialist before drilling your wall.
Mark the position of the screw holes, then drill the hole. The camera should be strongly
held. Don’t forget that the camera needs a power supply. If the camera is fixed upside
down, you can switch the video stream in our app (see 2.4)
If an antenna is supplied, don’t forget to connect it. (Only for some models)
Connect the AC adapter and plug it to a wall plug
For some models, you need to connect the RJ45 network cable from camera to router.
Then launch the app and add camera. After scanning QR code, the app will detect
your camera. If you want to use it in Wi-Fi mode then you should set your Wi-Fi settings
in the Advanced Settings >Wi-Fi Settings and enter the password of your Wi-Fi network
(your smartphone needs to be connected to the same network)
2.3 Connecting your camera to Wi-Fi using CamPad
Important: Verify your smart device (iOS or Android) is connected to a 2.4 GHz Wi-Fi.
Launch BeeWi
CamPad app,
plug camera
and click on
“add Camera”
Scan the QR
code on the
back of the
camera, and
name the
camera. Then
tap on “Next”
7
ENGLISH
Important: Check that your device (iOS or Android) is connected to a 2.4 GHz Wi-Fi
and not to a 5 GHz. If your phone is connected to a 5 GHz Wi-Fi please go to your
router (internet box) settings to temporarily disable 5Ghz frequency during pairing.
Input correct Wi-Fi password and “Next”, then the camera will try to connect, if
connected, “Add success” appears, and it will go back to the Camera page, and shows
“online”. If it fails to connect, please tap “try again” and repeat the process for 2-4
times.
Tip: During configuration, please make sure the mobile phone is close to the camera.
The whole process should be finished within 5 minutes of power on. Otherwise, the
camera should be unplugged and powered back.
Immediately after setup go
to:
Advanced Settings > User
Management to change
User and Password
Important Security Warning
(After setup only)
To keep your camera secure
and prevent unauthorized
access, please change the
default password for your
camera.
8
ENGLISH
We suggest that
your password
is more than
8-10 characters
and contains
a combination
of lowercase
characters,
uppercase
characters and
numbers.
2.4 Use your camera with CamPad
On main
screen, you
can click on
the camera
screenshot to
see live feed
you will arrive on this screen:
9
ENGLISH
A
G H I J K L M N 0
B C D E F
A- Stop video feed and go back to main menu
B- Preset. Enable or disable IR lights (not supported on some models)
C- Flip video horizontally
D- Flip video vertically
E- Rotate camera horizontally (not supported on some models)
F- Rotate camera vertically (not supported on some models)
G- Switch video feed orientation
H- Take snapshot
I - Record video
J- Enable speaker
K- Enable microphone (keep microphone button pressed)
L- Adjust brightness
M- Adjust contrast
N- Restore default value
0- Switch video resolution
Viewing Camera on Multi-View
If you have more than one camera you can click on the 4 squares in the left top corner
to enable multi-view
10
ENGLISH
Local Picture and Record
During live streaming, users can take snapshots and record to phone. To stop recording,
tap again or exit from the live streaming.
On the main page, in “Picture” and “Record”, users can find all the pictures and videos
taken.
SD/TF Card Record Playback (Not support in this model)
If your camera supports it and if a SD Card is installed in the camera, from the
Advanced Settings, users can choose to record or not on the SD card by switching the
SD/TF Recording button.
To view recordings, access to SD/TF Record and Playback. Choose a day in the
calendar, then select Schedule or Alarm click “Done” to see the list of recorded videos
on the SD card.
Alarm Settings
The IP Camera begins recording when it detects
movement/audio and stops recording in 30 sec. In
this section, users can customize the motion detection
feature. This feature can be set on the app or in the web
interface. Motion is detected by changes in the pixels of
the images.
Access to “Alarm Setting” to set Alarm Deployment,
Alarm Action and Time Deployment.
Alarm Deployment
In the Alarm Deployment screen users can set:
Motion Detection Sensitivity: users can choose Low/
Middle/ High sensitivity according to their needs.
Alarm Action
Once the alarm is set, users will receive a notification on the smartphone and can
choose to:
Save Picture to Email: Whenan alarmis detected,thecamerawillsendtwo alarm
picturesto the email box. The camera supports Gmail, Hotmail, Yahoo etc.
Save Picture to FTP: When an alarm is detected, the camera will send 2 pictures to
your FTP server, 3-4 pictures will be sent if the motion is enough frequent. Click on FTP
Setting to setup FTP.
Save Picture to SD/TF (disabled): When an alarm is detected, the camera will send 2
pictures to the SD card.
Inhaltsverzeichnis
Sprachen:
Andere BeeWi Sicherheitskamera Handbücher
