BEGA 77 008 Handbuch

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung

LIGMAN

LIGMAN DE-20023 Bedienungsanleitung

Spectroline

Spectroline MAXIMA ML-3500 Series Bedienungsanleitung

Installation and Technical Information

BEGA

Due to the dynamic nature of lighting products and the associated technologies, luminaire data on this sheet is subject to change at the discretion of BEGA North America. For the most current technical data, please refer to bega-us.com

BEGA 1000 Bega Way, Carpinteria, CA 93013 (805)684-0533 © copyright BEGA 2019

Figure 1:Voltage drop chart

Overview:

LED Watts: 3.0W

System Watts: 4.2W

Controllability: Non dimmable

Weight: 1.9 lbs.

Protection Class: IP67

Tools Required:

• Digging tool

Housing ush to nished surface

Figure 2: Installation

6' #18 AWG wire

Proper draining required

Garden oodlight - Home & Garden 77 008

Notice to Installer:

1. BEGA fixtures may be damaged if connected to a conduit system that contains water.

Article 300-5G of the National Electric Code requires that “conduits or raceway

through which moisture may contact energized live parts shall be sealed or plugged at

both ends”.

2. Remote 12-24V AC input voltage required for use with BEGA Home and Garden

luminaire. Voltage must not drop below 10V AC.

3. Pre-wired with 6' of #18 AWG wire with waterproof gland into housing.

4. Luminaire must be installed 10'' or more from pool, spa or fountain.

5. Do not remove the desiccant pouch from the luminaire housing.

Installation:

1. Turn main power off before start of installation.

2. Establish planned fixture location and provide 12-24V AC supply wiring.

3. Dig hole at least 5” deep for luminaire. Sufficient drainage (e,g, gravel, stone

chippings) must be provided under the luminaire. [Figure 2]

4. Install luminaire housing flush to finished surface.

5. Make wiring connections. For maximum wire run lengths see [Figure 1].

6. Wiring connections must be made in a watertight location.

7. Fill soil or gravel around luminaire assuring housing stays level.

8. Turn main power on.

Dimensions

A: 4 3/8''

B: 2 3/8''

C: 5''

Maintenance:

Clean regularly with solvent-free cleaner

removing dirt and debris. Do not use high

pressure cleaners.

Replacement Parts

See label inside of xture for LED replacement

part number.

Consult factory for all other replacement

components.

Accessories

Please refer to the appropriate accessory installation

sheet for further instruction when applicable.

Low voltage magnetic transformer 536

Updated: 10/07/19

77 008 1 of 2

5W 10W 15W 20W 30W 40W

18 366 183 122 92 61

46

16

585

292

195

146

97

73

14 928 464 309 232 155

116

12 1477 738 492 369 246

185

10 2353 1176 784 588 392

294

*Max Run Length (ft) Per Wire Size: 2V drop

WIRE SIZE (AWG)

TOTAL SYSTEM WATTS

Installation and Technical Information

BEGA

Due to the dynamic nature of lighting products and the associated technologies, luminaire data on this sheet is subject to change at the discretion of BEGA North America. For the most current technical data, please refer to bega-us.com

BEGA 1000 Bega Way, Carpinteria, CA 93013 (805)684-0533 © copyright BEGA 2019

Product Safety Warnings:

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

SUITABLE FOR WET LOCATIONS.

MIN 90°C SUPPLY CONDUCTORS.

CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT

BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.

CONVIENT AUX EMPLACEMENTS MOUILLÉS.

LES FILS D’ALIMENTATION 90°C MIN.

Updated: 10/07/19

2 of 2

77 008

Garden oodlight - Home & Garden 77 008