Behringer Tube Ultragain MIC100 Bedienungsanleitung

TUBE ULTRAGAIN MIC100

Version 1.1 September 2003

Users Manual

ENGLISH

This symbol, wherever it appears, alerts you to the presence of uninsulated

dangerous voltage inside the enclosurevoltage that may be sufficient to

constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and

maintenance instructions in the accompanying literature. Please read the

manual.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the

rear section). No user serviceable parts inside refer servicing to

qualified personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance

to rain and moisture.

DETAILED SAFETY INSTRUCTIONS:

1) Read these instructi ns.

2) Keep these instructi ns.

3) Heed all warnings.

4) F ll w all instructi ns.

5) D n t use this device near water.

6) Clean nly with a dry cl th.

7) D n t bl ck any ventilati n penings. Install in acc rdance with the manufacturers

instructi ns.

8) D n t install near any heat s urces such as radiat rs, heat registers, st ves, r ther

apparatus (including amplifiers) that pr duce heat.

9) D n t defeat the safety purp se f the p larized r gr unding-type plug. A p larized

plug has tw blades with ne wider than the ther. A gr unding type plug has tw blades

and a third gr unding pr ng. The wide blade r the third pr ng are pr vided f r y ur safety.

If the pr vided plug d es n t fit int y ur utlet, c nsult an electrician f r replacement f

the bs lete utlet.

10) Pr tect the p wer c rd fr m being walked n r pinched particularly at plugs, extensi n

c rds, and the p int at which they exit the unit.

11) Only use attachments/access ries specified by the manufacturer.

12) Use nly with the cart, stand, trip d, bracket, r table specified by the manufacturer,

r s ld with the device. When a cart is used, use cauti n when m ving the cart/device

c mbinati n t av id injury fr m stumbling ver it.

13) Unplug this device during lightning st rms r when n t used f r l ng peri ds f time.

14) Refer all servicing t qualified service pers nnel. Servicing is required when the unit

has been damaged in any way, such as p wer supply c rd r plug is damaged, liquid has

been spilled r bjects have fallen int the device, the unit has been exp sed t rain r

m isture, d es n t perate n rmally, r has been dr pped.

TUBE ULTRAGAIN MIC100

Welcome to the BEHRINGER family!

Thank you for the confidence you have placed in us by purchasing

the MIC100.

Your MIC100 is a professional mic preamp that can be used in a

variety of applications. Due to its incredible functionality and the

broad range of connection options the MIC100 ensures outstanding

performance. You will soon appreciate the MIC100s flexibility be it

live on stage or in the home/professional recording studio.

1. INTRODUCTION

With the MIC100 you have purchased an extremely musical mic

preamp that is equipped with a 12AX7 vacuum tube. An integrated

limiter a phase reverse function phantom power supply a highly

accurate LED meter and a switchable pad function complement this

powerful device.

1.1 The design concept

The heart of the TUBEULTRAGAIN is an extremely low-noise

microphone preamp circuitry that uses discrete components and

produces a highly trans-parent sound. In combination with our

BEHRINGER tube technology the operational amplifiers 4580 and a

sophisticated circuit topology the TUBEULTRAGAIN yields excellent

noise and distortion properties. The innovative UTC circuitry that has

been developed by our engineering team offers an abundance of

sound-shaping possibilities. Absolute musicality was our major goal

when we designed the TUBE ULTRAGAIN. The result is a device that

thanks to our tube circuitry lends an incredible punch to percussion

instruments. On the other hand instruments that are rich in upper

harmonics will receive more transparency. The sound will be warm

detailed and brilliant.

Surely you know the recording problem that single instruments or

vocals sometimes dont cut through. Thanks to the TUBEULTRAGAIN

vocals gain in presence and volume without masking other instruments.

As a result your voice will be perfectly integrated in the mix.

1. INTRODUCTION

TUBE ULTRAGAIN MIC100

2. CONTROL ELEMENTS

Fig. 2.1: Side panel of the MIC100

2.1 Connections (side pane )

Use the POWER SUPPLY CO ECTOR to hook up the enclosed

power supply unit. Next to this connector youll find the strain

relief clamp which prevents accidental release of the power

supply.

This is the balanced XLR OUTPUT of your MIC100. Use this

connector to feed the XLR input of your mixing console

multitrack recorder or power amp.

The balanced 1/4" TRS OUTPUT of your MIC100 can also be

connected to either mixer recording system or power amp.

+P ease note that you can use the XLR and TRS outputs of

your MIC100 at the same time! Thus, it is possib e to

connect the MIC100s output signa to two different devices

simu taneous y.

The balanced 1/4" TRS I PUT of your MIC100 can be used to

connect your electric guitar for example. This input is wired

parallelly to the XLR input.

2. CONTROL ELEMENTS

TUBE ULTRAGAIN MIC100

Use the balanced XLR I PUT to connect your microphone.

+In contrast to its outputs, the MIC100s inputs shou d

never be used simu taneous y!

2.2 User interface

Fig. 2.2: User interface of the MIC100

The GAI control allows applying gain from +26 to +60 dB to the

input signal. This control should be set fully counterclockwise

when (dis)connecting a sound source to the MIC100. When all

connections are made slowly start raising gain.

We recommend using the LED meter to adjust gain. The

LED chain displays the output signal level in dB. Please make

sure that the clip LED never lights up permanently. It should

light up only at peak signals but never all the time.

2. CONTROL ELEMENTS

TUBE ULTRAGAIN MIC100

If your MIC100 is connected to the mains via the enclosed

power supply unit the POWER LED lights up to indicate that

your MIC100 is running.

The 20 dB PAD button reduces the input sensitivity by 20 dB.

The appropriate setting depends on the equipment connected.

No matter what your application is the clip LED warns you to

reduce the gain setting so as to avoid distortion.

This +48 V switch activates the phantom power supply for the

XLR input. Phantom power supply is required for operating

condenser microphones.

With the PHASE REVERSE switch the input signal is reversed

by 180°. This function is available for both mic and line signals.

Use this function in a multi-microphone setup if you detect

phase cancellations in specific frequency bands.

Use the LIMITER switch to limit the signal and to prevent

distortion.

The OUTPUT control governs the output level of the device

within a range from -oo to +10 dB. If the control is set fully

counter-clockwise there is no output signal at all. The more the

control is set clockwise the higher the output level.

2.3 Seria number

The MIC100s serial number is located on the bottom cover. Please

take time to fill in and return the warranty card within 14 days after the

date of purchase so as to benefit from our extended warranty. Or

use our online registration option available on the World Wide Web at

www.behringer.com.

3. WIRING EXAMPLES

Youll be surprised how flexibly you can set up your MIC100. The

following chapter describes some typical wiring examples.

3. WIRING EXAMPLES

TUBE ULTRAGAIN MIC100

3.1 Enhancing voca s and instruments in ive app ications

Here the MIC100 is wired before the mixers channel input. Thus

the sound gains in warmth and transparency. Due to the integrated

limiter distortion is eliminated effectively.

Fig. 3.1: Standard live application

3.2 Direct to disk app ication in studio or home recording

environments

If you are looking for a device that considerably enhances the sound

of your digital workstation this is where the MIC100 comes in. Many

hard disk recorders lack a certain liveliness. In addition they are

often equipped with lousy microphone preamps. Such problems can

be solved perfectly with the MIC100.

Fig. 3.2: Connection of the MIC100 and the soundcard of your PC

3. WIRING EXAMPLES

TUBE ULTRAGAIN MIC100

3.3 The MIC100 as DI-box

Your MIC100 is excellently suited for this application. For example

you can connect an unbalanced acoustic guitar signal to the MIC100

to prevent hum or interference noise. What you get is a balanced

noise-free signal.

Fig. 3.3: The MIC100 as DI-box

4. AUDIO CONNECTIONS

Fig. 4.1: XLR connectors

4. AUDIO CONNECTIONS

TUBE ULTRAGAIN MIC100

Fig. 4.2: 1/4" TS connector

Fig. 4.3: 1/4" TRS connector

5. WARRANTY

For our current warranty terms please refer to our website at http:/

/www.behringer.com or send us a request via e-mail at

[email protected] fax at +49 2154 9206 4199 or call

+49 2154 9206 4166.

5. WARRANTY

TUBE ULTRAGAIN MIC100

6. SPECIFICATIONS

XLR input

Co ector Bala ced/u bala ced

Type Tra sformerless, DC-decoupled i put

Impeda ce approx. 2 kΩ

Max. i put level +7 dBu / 20 dB with pad

1/4" TRS input

Co ector Bala ced/u bala ced

Type Tra sformerless, DC-decoupled i put

Impeda ce approx. 1 MΩ

Max. i put level +16 dBu / 20 dB with pad

Audio outputs

Co ectors XLR a d 1/4" TRS co ector bala ced/u bala ced

Type Tra sformerless, DC-decoupled output

Impeda ce approx. 700 Ω bala ced / approx. 350 Ω u bala ced

Max. output level approx. +26 dBu @ 100 kΩ

System specifications

Freque cy respo se Mic i put <10 Hz - 43 kHz (+/-3 dB)

Li e i put <10 Hz - 40 kHz (+/-3 dB)

Function controls

Gai variable (+26 to +60 dB)

Output variable (-oo to +10 dB)

Function switches

20 dB pad Level atte uatio (20 dB)

+48 V Activates the pha tom power

Phase reverse Phase reverse (180°)

Limiter Limits the output sig al

Indicators

I put level 8-segme t LED meter: -24, -18, -12, -6, 0, +6, +12,

clip

Power-LED I dicates operatio

ower supply

Mai s voltages USA/Ca ada 120 V~, 60 Hz, PSU

U.K./Australia 240 V~, 50 Hz, PSU

Europe 230 V~, 50 Hz, PSU

Japa 100 V~, 50 - 60 Hz, PSU

hysical

Dime sio s (H x W x D) approx. 2 1/2" (64 mm) x 5 1/4" (135 mm) x

5 1/4" (135 mm)

Weight (without power supply) approx. 0.5 kg (1.1 lbs)

BEHRINGER is constantly striving to maintain the highest professional standards. As a

result of these efforts, modifications may be made from time to time to existing products

without prior notice. Specifications and appearance may differ from those listed or illustrated.

6. SPECIFICATIONS

Andere Handbücher für Tube Ultragain MIC100

Andere Behringer Verstärker Handbücher

Behringer

Behringer EUROPOWER EPQ2000 Bedienungsanleitung

Behringer

Behringer iNuke NU1000 Bedienungsanleitung

Behringer

Behringer NX3000 Bedienungsanleitung

Behringer

Behringer EUROPOWER EP2000 Bedienungsanleitung

Behringer

Behringer TUBE ULTRAGAIN MIC200 Bedienungsanleitung

Behringer

Behringer Ultrastack BG412V Bedienungsanleitung

Behringer

Behringer Ultra-Voice VX2000 Bedienungsanleitung

Behringer

Behringer TUBE ULTRAGAIN MIC200 Bedienungsanleitung

Behringer

Behringer Ultratone K1800FX Bedienungsanleitung

Behringer

Behringer Ultrabass BXL3000A Bedienungsanleitung

Behringer

Behringer UltraBass BX4500H Bedienungsanleitung

Behringer

Behringer Ultrabass BXR1800H Bedienungsanleitung

Behringer

Behringer Ultrabass BXL3000 Bedienungsanleitung

Behringer

Behringer Microamp HA400 Bedienungsanleitung

Behringer

Behringer EUROPOWER EPX2000 Bedienungsanleitung

Behringer

Behringer Miniamp AMP800 Bedienungsanleitung

Behringer

Behringer Ultragain Pro MIC2200 Bedienungsanleitung

Behringer

Behringer Ultrabass BX600 Bedienungsanleitung

Behringer

Behringer UltraBass BX4500H Bedienungsanleitung

Behringer

Behringer iNuke NU6000 Bedienungsanleitung

Behringer

Behringer EUROPOWER EPQ2000 Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP2000 Bedienungsanleitung

Behringer

Behringer TUBE ULTRAGAIN MIC200 Bedienungsanleitung

Behringer

Behringer P2 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung