Behringer Echo Machine EM600 Bedienungsanleitung

ECHO MACHINE EM600

Ultimate Echo Modeling Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER ECHO MACHINE EM600.

This ultimate stereo Echo Modeler delivers the whole range of analog, tape and digital delay eects.

Create any sound from vintage tape-based echo over warm analog BBD delay sound to clean

high-delity digital delay.

1. Controls

(1) The MIX knob is used for setting the

level of the delays.

(2) The REPEAT knob determines the

number of delays.

(3) The TIME control adjusts the

delay time. The length of time

depends on the selected program.

The delay time indicates how fast the

signal repetitions will follow after the

original signal. Low settings allow

to use the unit as a chorus or anger.

Alternatively, you can tap the tempo

with the footswitch. Turning the

control overrides tap tempo settings.

(4) With the MODE knob, you can select

one of several delay modes:

(1)

(9)

(4)

(11)

(6)

(8) (7)

(5)

(10)

(2) (3)

(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.

(6) Use the footswitch to activate/deactivate the eect. If you depress the pedal for more than

two seconds, you are able to enter a tempo by tapping the pedal several times in time with

the music. Depressing the pedal again for more than two seconds quits the tempo input mode.

(7) The ¼" TS connectors (IN A/IN B) connect to your instrument. Use IN A for mono applications and

both IN A and IN B if you have a stereo signal source, such as another eects unit.

(8) The two ¼" TS connectors OUT A and OUT Bsend the signals to your amp. Use both connectors if

you want to achieve a full stereo delay eect. For mono use simply plug in OUT A.

(9) With the MOD knob, you can add a nice modulation eect to your delays (TYPE switch position:

ANALOG = Vibrato; DIGITAL = Chorus; TAPE = Wow and utter).

(10) The TYPE switch allows you to choose from dierent classic delay characteristics,

ranging from TAPE (delays with subtle high-frequency damping), DIGI (high-quality delays)

to ANALOG (dark and slightly distorted delays).

(11) With the TRAILS switch, you can prevent delays from being cropped when bypassing the eect.

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

ECHO MACHINE EM600

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGEWITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARKTEKNIK,

MIDAS, BUGERA, ANDTURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).. ALL TRADEMARKS ARETHE PROPERTY OF THEIR RESPECTIVE OWNERS.

MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSSWHICH MAY BE SUFFERED BY ANY PERSONWHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION,

PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH

AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND

MUSICGROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE,

P.O. Box 146, Road Town, Tortola, British Virgin Islands

◊ The EM600 has no On/O switch. It is operable as soon as you insert a plug into one of

the IN connectors. Disconnect the plug, if you don’t use the EM600. In doing so, you can

extend the life time of the battery.

The SERIAL NUMBER is located at the underside.

◊ In rare cases interferences of the normal function may appear by external inuence

(e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this

occurs, please turn down the volume on subsequent ampliers and disconnect the input

connector briey to restart the application.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting

http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specications

Connector ¼" TS

Impedance 500 kΩ

Out A

Connector ¼" TS

Impedance 1 kΩ

Out B

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V𝌂, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

China/Korea 220 V~, 50/60 Hz

Europe/U.K./ 230 V~, 50 Hz

Australia

Japan 100 V~, 50 - 60 Hz

Export model 120/230 V~, 50 - 60 Hz

Power connector 2 mm DC jack,

negative center

Battery 9 V type 6LR61

Power consumption 60 mA

Physical/Weight

Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"

(H x W x D) approx. 54 x 70 x 123 mm

Weight approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing

products without prior notice. Specifications and appearance

may therefore differ from those listed or shown.

Inhaltsverzeichnis

Andere Behringer Musikpedal Handbücher

Behringer

Behringer Noice Reducer NR100 Bedienungsanleitung

Behringer

Behringer HI BAND FLANGER HF300 Bedienungsanleitung

Behringer

Behringer ULTRA PHASE SHIFTER UP100 Bedienungsanleitung

Behringer

Behringer TUBE AMP MODELER TM300 Bedienungsanleitung

Behringer

Behringer TUBE AMP MODELER TM300 Bedienungsanleitung

Behringer

Behringer SUPER FLANGER SF400 Bedienungsanleitung

Behringer

Behringer Ultra Bass Chorus BUC400 Bedienungsanleitung

Behringer

Behringer Digital Multi-FX FX600 Bedienungsanleitung

Behringer

Behringer PB1000 Bedienungsanleitung

Behringer

Behringer Intelligate IG9 Bedienungsanleitung

Behringer

Behringer COMPRESSOR/LIMITER CL9 Bedienungsanleitung

Behringer

Behringer BCH100 Bedienungsanleitung

Behringer

Behringer VINTAGE DISTORTION VD1 Bedienungsanleitung

Behringer

Behringer Heavy Metal HM300 Bedienungsanleitung

Behringer

Behringer ULTRA TREMOLO UT300 Bedienungsanleitung

Behringer

Behringer ULTRA TREMOLO/PAN TP300 Bedienungsanleitung

Behringer

Behringer BOD100 Bedienungsanleitung

Behringer

Behringer ULTRA DISTORTION UD300 Bedienungsanleitung

Behringer

Behringer V-TONE ACOUSTIC DRIVER DI ADI21 Bedienungsanleitung

Behringer

Behringer UW300 Bedienungsanleitung

Behringer

Behringer REVERB MACHINE RV600 Bedienungsanleitung

Behringer

Behringer DIGITAL REVERB/DELAY DR400 Bedienungsanleitung

Behringer

Behringer VINTAGE DELAY VD400 Bedienungsanleitung

Behringer

Behringer DR100 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung

BYOC

BYOC Analog Chorus Handbuch

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung