Behringer PB1000 Bedienungsanleitung

PEDAL BOARD PB1000/PB600

Universal Eects Pedal Floor Board with Integrated/9 V DC Power Supply and Patch Cables

Thank you for showing your condence in us by purchasing the

Behringer PEDAL BOARD PB1000/PB600. This high-quality lightweight pedal

board is able to transport up to 12 (PB1000) or up to 6 (PB600) pedals.

The onboard 1.7 A power supply includes all necessary cabling for powering

your collection of stompboxes

1. Connections

(1) Use this ¼" TS INPUT connector to plug in the instrument cable.

Please use only a high-quality instrument cable here.

(2) The ¼" TS TO EFFECTS connector sends the signal to your eects pedals.

(3) Use these ¼" TS FROM EFFECTS connectors to plug in the stereo eects

signal from your eects pedals.

(4) These ¼" TS OUTPUT TO AMP connectors send the signal to your amp(s).

(5) Use the 9 V connection to plug in the included 9 V power supply.

(6) Use the DC OUT connector to plug in the included daisy chain cable and

connect it to all eects pedals.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized

attachments/accessories. Do not service product yourself. Contact our qualied

servicing personnel for servicing or repairs, especially when power supply cord or

plug is damaged.

3. Warranty

For the applicable warranty terms and conditions and additional information

regarding Music Tribe’s Limited Warranty, please see complete details online at

musictribe.com/warranty.

Gracias por brindarnos tu conanza al adquirir la PEDAL BOARD PB1000

de Behringer. Esta ligera pedalera de alta calidad permite transportar hasta

12 pedales de efectos. El adaptador de corriente de 1,7 A incluye todos los cables

necesarios para suministrar de energía a tu colección de pedales de efectos.

1. Conexiones

(1) Usa el jack mono de 6,3 mm INPUT para conectar el cable de tu instrumento.

Procura utilizar sólo cables de instrumento de alta calidad.

(2) El jack mono de 6,3 mm TO EFFECTS transmite la señal de tu instrumento a

los pedales de efectos (TU300 en la ilustración).

(3) Utiliza los jacks mono de 6,3 mm FROM EFFECTS para conectar la señal

estéreo de tus pedales de efectos (DR100 en la ilustración).

(4) Los jacks mono de 6,3 mm OUTPUT TO AMP transmiten la señal a tu(s)

amplicador(es).

(5) Enchufa en el conector 9 V la fuente de alimentación incluida.

(6) Utiliza la salida DC OUT para conectar el cable de interconexión incluido y

conectar todos los pedales en cadena.

2. Instrucciones de Seguridad

No utilizar ni instalar cerca de agua o fuentes de calor. Utiliza sólo accesorios y

aditamentos autorizados. No intentes reparar el producto por ti mismo. Contacta

a nuestro personal técnico cualicado para servicio y reparaciones, especialmente

cuando la fuente o el cable de alimentación hayan sufrido algún daño.

3. Garantía

Si quiere conocer los detalles y condiciones aplicables de la garantía así como

información adicional sobre la Garantía limitada de Music Tribe, consulte online

toda la información en la web musictribe.com/warranty.

(4)

(3)

(5)

(1)

(2)

(6)

(4)

(3)

(5)

(1)

(2)

(6)

V 1.0

PEDAL BOARD PB1000/PB600

Universal Eects Pedal Floor Board with Integrated/9 V DC Power Supply and Patch Cables

Merci de la conance que tu nous as prouvée en achetant le PEDAL BOARD PB1000

Behringer. Cette mallette compacte de haute qualité pour pédales d’eet permet

de transporter et de pré-congurer jusqu’à 12 pédales. Le bloc d’alimentation

intégré de 1,7 A est accompagné du câble de chaînage nécessaire pour alimenter

ta collection de pédales d’eet.

1. Connexions

(1) Relie le câble de ton instrument à l’entrée INPUT sur jack mono.

Veille à toujours utiliser un câble instrument de haute qualité.

(2) Le connecteur TO EFFECTS sur jack mono conduit le signal jusqu’à tes

pédales d’eet (TU300 sur l’illustration).

(3) Utilise les connecteurs FROM EFFECTS sur jacks mono pour le câblage du

signal d’eet stéréo délivré par tes pédales (DR100 sur l’illustration).

(4) Les sorties OUTPUT TO AMP sur jacks mono délivrent le signal destiné à

ton/tes ampli(s).

(5) Utilise le connecteur 9 V pour le branchement du bloc d’alimentation

9 V inclus.

(6) Utilise le connecteur DC OUT pour alimenter la chaîne de pédales en le

reliant à toutes les pédales d’eet.

2. Consignes de Securite

Ne pas utiliser ni installer à proximité de liquides ou de sources de chaleur. Utiliser

exclusivement les accessoires autorisés. Ne pas réaliser de maintenance soi-

même sur le produit. Contacter notre personnel technique pour tout service ou

réparation, particulièrement si le cordon ou le connecteur du bloc d’alimentation

est endommagé.

3. Garantie

Pour connaître les termes et conditions de garantie applicables, ainsi que les

informations supplémentaires et détaillées sur la Garantie Limitée de MusicTribe,

consultez le site Internet musictribe.com/warranty.

Vielen Dank für das Vertrauen, das Du uns mit dem Kauf des Behringer PEDAL

BOARD PB1000 entgegengebracht hast. Mit diesem hochqualitativen,

leichten Floor Board können bis zu 12 Eektpedale transportiert werden.

Das integrierte 1,7 A-Netzteil inklusive aller Kabel bietet alles nötige,

um Deine Stompbox-Sammlung zu betreiben.

1. Anschlüsse

(1) Die 6,3-mm IN-Monoklinkenbuchse dient zum Anschluss des Instruments.

Verwende hierfür bitte nur hochqualitative Instrumentenkabel.

(2) Die 6,3-mm TO EFFECTS-Monoklinkenbuchse leitet das Signal an

Deine Eektpedale weiter (TU300 in der Abbildung).

(3) Verwende die 6,3-mm FROM EFFECTS-Monoklinkenbuchsen, um das

Stereo-Eektsignal Deiner Pedale anzuschließen (DR100 in der Abbildung).

(4) Diese 6,3-mm OUTPUT TO AMP-Monoklinkenbuchsen leiten das

Signal an Deinen/Deine Verstärker weiter.

(5) Der 9 V -Anschluss dient zum Anschluss des mitgelieferten 9 V Adapters.

(6) Verwende den DC OUT-Anschluss, um das mitgelieferte Daisy Chain-Kabel

anzuschließen und alle Eektpedale zu verkabeln.

2. Garantie

Die geltenden Garantiebedingungen und zusätzliche Informationen bezüglich

der von Music Tribe gewährten beschränkten Garantie nden Sie online unter

musictribe.com/warranty.

3. Sicherheitshinweise

Betreibe das Gerät nicht in der Nähe von Wasser oder Wärmequellen.

Verwende bitte nur autorisiertes Zubehör. Führe bitte keinerlei Reparaturen

am Gerät eigenständig durch. Reparaturen sind nur von qualiziertem

Fachpersonal vorzunehmen, insbesondere bei Beschädigungen des Netzkabels

oder Netzsteckers.

(4)

(3)

(5)

(1)

(2)

(6)

(4)

(3)

(5)

(1)

(2)

(6)

PEDAL BOARD PB1000/PB600

Universal Eects Pedal Floor Board with Integrated/9 V DC Power Supply and Patch Cables

Obrigado pela conança que depositou em nós ao adquirir a Behringer PEDAL

BOARD PB1000. Esta pedaleira de alta qualidade muito leve é capaz de transportar

até 12 pedais de efeitos. O quadro de alimentação de 1,7 A inclui toda a cablagem

necessária para ligar a sua colecção de stompboxes.

1. Ligações

(1) Use este conector ¼" TS INPUT para ligar o cabo do instrumento. Por favor,

use apenas um cabo de instrumento de alta qualidade aqui.

(2) O conector ¼" TS TO EFFECTS envia o sinal para os seus pedais de efeitos

(TU300 na ilustração).

(3) Use estes conectores ¼" TS FROM EFFECTS para ligar o sinal de efeitos

estéreo dos seus pedais de efeitos (DR100 na ilustração).

(4) Estes conectores ¼" TS OUTPUT TO AMP enviam o sinal para o(s)

seu(s) amplicador(es).

(5) Use a conexão 9 V para ligar o quadro de alimentação de 9 V incluído.

(6) Use o conector DC OUT para ligar o cabo Daisy Chain incluído e o ligar a todos

os pedais de efeitos.

2. Instruções de Segurança

Não utilize na proximidade de água, nem instale perto de fontes de calor.

Use apenas conexões e acessórios autorizados. Não repare o seu produto.

Contacte o nosso pessoal qualicado para consertos ou reparações,

especialmente se o cabo ou a tomada de alimentação estiverem danicados.

3. Garantia

Para obter os termos de garantia aplicáveis e condições e informações adicionais

a respeito da garantia limitada do Music Tribe, favor vericar detalhes na íntegra

através do website musictribe.com/warranty.

Grazie per averci dimostrato la tua ducia acquistando la Behringer PEDAL BOARD

PB1000 / PB600. Questa pedaliera leggera di alta qualità è in grado di trasportare

no a 12 (PB1000) o no a 6 (PB600) pedali. L'alimentatore integrato da 1,7 A

include tutti i cavi necessari per alimentare la tua collezione di pedali

1. Connessioni

(1) Utilizzare questo connettore TS INPUT da ¼" per collegare il cavo dello

strumento. Utilizzare qui solo un cavo per strumenti di alta qualità.

(2) Il connettore da ¼" TS TO EFFECTS invia il segnale ai pedali degli eetti.

(3) Utilizzare questi connettori da ¼" TS FROM EFFECTS per collegare il segnale

degli eetti stereo dai pedali degli eetti.

(4) Questi connettori da ¼" TS OUTPUT TO AMP inviano il segnale agli

amplicatori.

(5) Utilizzare la connessione da 9 V per collegare l'alimentatore da 9 V incluso.

(6) Utilizzare il connettore DC OUT per collegare il cavo a margherita incluso e

collegarlo a tutti i pedali degli eetti.

2. Istruzioni di sicurezza

Non utilizzare vicino all'acqua o installare vicino a fonti di calore. Utilizzare solo

allegati / accessori autorizzati. Non eseguire la manutenzione del prodotto da soli.

Contattare il nostro personale di assistenza qualicato per assistenza o riparazioni,

soprattutto se il cavo di alimentazione o la spina sono danneggiati.

3. Garanzia

Per i termini e le condizioni di garanzia applicabili e ulteriori informazioni sulla

garanzia limitata di Music Tribe, vedere i dettagli completi online su musictribe.

com/warranty.

(4)

(3)

(5)

(1)

(2)

(6)

(4)

(3)

(5)

(1)

(2)

(6)

PEDAL BOARD PB1000/PB600

Universal Eects Pedal Floor Board with Integrated/9 V DC Power Supply and Patch Cables

Bedankt voor het vertrouwen dat je ons hebt getoond door de Behringer PEDAL

BOARD PB1000 / PB600 te kopen. Dit hoogwaardige lichtgewicht pedaalbord kan

maximaal 12 (PB1000) of maximaal 6 (PB600) pedalen vervoeren. De ingebouwde

1,7 A-voeding bevat alle benodigde bekabeling om uw verzameling stompboxen

van stroom te voorzien

1. Verbindingen

(1) Gebruik deze ¼" TS INPUT-connector om de instrumentkabel aan te sluiten.

Gebruik hier alleen een hoogwaardige instrumentkabel.

(2) De ¼" TS TO EFFECTS-connector stuurt het signaal naar uw eectpedalen.

(3) Gebruik deze ¼" TS FROM EFFECTS-aansluitingen om het stereo-

eectsignaal van uw eectpedalen aan te sluiten.

(4) Deze ¼" TS OUTPUT TO AMP-connectoren sturen het signaal naar

uwversterker (s).

(5) Gebruik de 9 V

aansluiting om de meegeleverde 9 V-voeding aan te sluiten.

(6) Gebruik de DC OUT-connector om de meegeleverde daisy chain-kabel aan te

sluiten en op alle eectpedalen aan te sluiten.

2. Veiligheidsinstructies

Niet in de buurt van water of warmtebronnen gebruiken. Gebruik alleen

geautoriseerde hulpstukken / accessoires. Voer zelf geen onderhoud uit aan het

product. Neem contact op met ons gekwaliceerd onderhoudspersoneel voor

onderhoud of reparaties, vooral als het netsnoer of de stekker beschadigd is.

3. Garantie

Voor de toepasselijke garantievoorwaarden en aanvullende informatie over de

beperkte garantie van Music Tribe, zie de volledige details online op musictribe.

com/warranty.

Tack för att du visar ditt förtroende för oss genom att köpa Behringer PEDAL

BOARD PB1000 / PB600. Detta högkvalitativa lätta pedalkort kan transportera

upp till 12 (PB1000) eller upp till 6 (PB600) pedaler. Den inbyggda 1.7

A-strömförsörjningen innehåller alla nödvändiga kablar för att driva din samling

av stompboxar

1. Anslutningar

(1) Använd denna ¼" TS INPUT-kontakt för att ansluta instrumentkabeln.

Använd endast en högkvalitativ instrumentkabel här.

(2) ¼" TS TO EFFECTS-kontakten skickar signalen till dina eektpedaler.

(3) Använd dessa ¼" TS FRÅN EFFECTS-kontakter för att ansluta

stereoeektsignalen från dina eektpedaler.

(4) Dessa ¼" TS OUTPUT TO AMP-kontakter skickar signalen till din förstärkare.

(5) Använd 9 V anslutningen för att ansluta den medföljande

9 V-strömförsörjningen.

(6) Använd DC OUT-kontakten för att ansluta den medföljande kedjekabeln och

anslut den till alla eektpedaler.

2. Säkerhets instruktioner

Använd inte i närheten av vatten eller installera nära värmekällor. Använd endast

auktoriserade tillbehör / tillbehör. Underhåll inte produkten själv. Kontakta vår

kvalicerade servicepersonal för service eller reparationer, särskilt när nätkabeln

eller kontakten är skadad.

3. Garanti

För tillämpliga garantivillkor och ytterligare information om Music Tribes

begränsade garanti, se fullständig information online på musictribe.com/

warranty.

(4)

(3)

(5)

(1)

(2)

(6)

(4)

(3)

(5)

(1)

(2)

(6)

PEDAL BOARD PB1000/PB600

Universal Eects Pedal Floor Board with Integrated/9 V DC Power Supply and Patch Cables

Dziękujemy za okazane nam zaufanie kupując Behringer PEDAL BOARD PB1000 /

PB600. Ta wysokiej jakości lekka deska pedałowa może pomieścić do 12 (PB1000)

lub do 6 (PB600) pedałów. Wbudowany zasilacz 1,7 A zawiera całe niezbędne

okablowanie do zasilania kolekcji kostek podłogowych

1. Znajomości

(1) Użyj tego złącza ¼" TS INPUT do podłączenia kabla instrumentu. Proszę

używać tutaj tylko wysokiej jakości kabla instrumentalnego.

(2) Złącze ¼" TS TO EFFECTS przesyła sygnał do twoich pedałów efektów.

(3) Użyj tych złączy ¼" TS FROM EFFECTS, aby podłączyć stereofoniczny sygnał

efektów z pedałów efektów.

(4) Te złącza ¼" TS OUTPUT TO AMP przesyłają sygnał do wzmacniacza (-ów).

(5) Użyj złącza 9 V , aby podłączyć dołączony zasilacz 9 V.

(6) Użyj złącza DC OUT, aby podłączyć dołączony kabel szeregowy i podłączyć

go do wszystkich pedałów efektów.

2. Instrukcje bezpieczeństwa

Nie używaj w pobliżu wody ani nie instaluj w pobliżu źródeł ciepła. Używaj tylko

autoryzowanych dodatków / akcesoriów. Nie naprawiaj produktu samodzielnie.

Skontaktuj się z naszym wykwalikowanym personelem serwisowym w celu

wykonania serwisu lub naprawy, zwłaszcza w przypadku uszkodzenia przewodu

zasilającego lub wtyczki.

3. Gwarancja

Aby zapoznać się z obowiązującymi warunkami gwarancji i dodatkowymi

informacjami dotyczącymi ograniczonej gwarancji Music Tribe, zapoznaj się ze

wszystkimi szczegółami w trybie online pod adresem musictribe.com/warranty.

4. Specications

PB1000

Power Supply

Connectors ¼" TS, unbalanced

Power supply 9 V, 1.7 A switching adaptor (included)

USA/Canada 120 V~, 60 Hz GPE182-090170-1 (HSB-UL)

Europe/Australia 230 V~, 50 Hz GPE182-090170-2 (HSB-EU)

U.K. GPE182-090170-3 (HSB-UK)

Korea 220 V~, 60 Hz GPE182-090170-4 (HSB-SAA)

China 220 V~, 50 Hz GPE182-090170-5 (HSB-CCC)

Japan 100 V~, 50/60 Hz GPE182-090170-6 (HSB-JP)

Power connector 2 mm DC jack, center negative

(with daisy-chain cable included)

Power consumption 2 mA

Dimensions/Weight

Dimensions (H x W x D) 19.8 x 26.1 x 4.5" (504 x 663 x 115 mm)

Weight approx. 12.3 lbs / 5.6 kg

including PSU & daisy chain

PB600

Power Supply

Connectors ¼" TS, unbalanced

Power supply 9 V , 1.7 A switching adaptor (included)

USA/Canada 120 V~, 60 Hz GPE182-090170-1 (HSB-UL)

Europe/Australia 230 V~, 50 Hz GPE182-090170-2 (HSB-EU)

U.K. GPE182-090170-3 (HSB-UK)

Korea 220 V~, 60 Hz GPE182-090170-4 (HSB-SAA)

China 220 V~, 50 Hz GPE182-090170-5 (HSB-CCC)

Japan 100 V~, 50/60 Hz GPE182-090170-6 (HSB-JP)

Power connector 2 mm DC jack, center negative

(with daisy-chain cable included)

Power consumption 2 mA

Dimensions/Weight

Dimensions (H x W x D) 13 x 26.1 x 4.4" (329 x 663 x 113 mm)

Weight approx. 8.4 lbs / 3.8 kg including

PSU & daisy chain

Behringer is constantly striving to maintain the highest professional standards. As a result of these

efforts, modifications may be made from time to time to existing products without prior notice.

Specifications and appearance may therefore differ from those listed or shown.

(4)

(3)

(5)

(1)

(2)

(6)

PEDAL BOARD PB1000/PB600

Universal Eects Pedal Floor Board with Integrated/9 V DC Power Supply and Patch Cables

5. Application Example

(Products shown not included except PB1000/PB600)

PB600

PB1000

PEDAL BOARD PB1000/PB600

Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.Technical specications, appearances and other information

are subject to change without notice. All trademarks are the property of their respective owners. Midas, KlarkTeknik, Lab Gruppen, Lake,Tannoy,Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones,

FEDERAL COMMUNICATIONS

COMMISSION COMPLIANCE

INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 5270 Procyon Street,

Las Vegas NV 89118,

United States

Phone Number: +1 702 800 8290

PEDAL BOARD PB1000/PB600

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•• Reorient or relocate the receiving antenna.

•• Increase the separation between the equipment and receiver.

•• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

isconnected.

•• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Important information:

Changes or modications to the equipment not expressly approved by Music Tribe can void the

user’s authority to use the equipment.

Operation Ambient Temperature up to 45°.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/

EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive

2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.

Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S

Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark

PEDAL BOARD PB1000/PB600

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Behringer Musikpedal Handbücher

Behringer

Behringer Heavy Metal HM300 Bedienungsanleitung

Behringer

Behringer ULTRA VIBRATO UV300 Bedienungsanleitung

Behringer

Behringer MIDI FOOT CONTROLLER FCB1010 Bedienungsanleitung

Behringer

Behringer CO600 Bedienungsanleitung

Behringer

Behringer Vintage tube overdrive TO800 Bedienungsanleitung

Behringer

Behringer CHORUS SPACE-D CD400 Bedienungsanleitung

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Behringer

Behringer TRUTH B2030A Bedienungsanleitung

Behringer

Behringer NOISE REDUCER NR100 Bedienungsanleitung

Behringer

Behringer COMPRESSOR SUSTAINER CS100 Bedienungsanleitung

Behringer

Behringer Super Metal SM400 Bedienungsanleitung

Behringer

Behringer Vintage tube overdrive TO800 Bedienungsanleitung

Behringer

Behringer ULTRA FLANGER UF300 Bedienungsanleitung

Behringer

Behringer Overdrive/Distortion Bedienungsanleitung

Behringer

Behringer V-TONE ACOUSTIC DRIVER DI ADI21 Bedienungsanleitung

Behringer

Behringer VINTAGE DELAY VD400 Bedienungsanleitung

Behringer

Behringer Compressor Sustainer CS100 Bedienungsanleitung

Behringer

Behringer INSTRUMENT/AMP SELECTOR AB100 Bedienungsanleitung

Behringer

Behringer VIRTUALIZER 3D FX2000 Kurzanleitung

Behringer

Behringer V-Tone Guitar GDI21 Bedienungsanleitung

Behringer

Behringer DR100 Bedienungsanleitung

Behringer

Behringer VINTAGE DISTORTION VD1 Bedienungsanleitung

Behringer

Behringer BASS OVERDRIVE BOD400 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung

BYOC

BYOC Analog Chorus Handbuch

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung