Behringer ROTARY MACHINE RM600 Bedienungsanleitung

ROTARY MACHINE RM600

Ultimate Rotary Speaker Modeling Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER ROTARY MACHINE RM600.

This ultimate eects pedal delivers the whole history of 3-dimensional rotary speaker eects—at the

touch of a footswitch. Experience the classic and swirling sounds of famous signature rotary speakers in

one compact pedal.

1. Controls

(1) The FAST control adjusts the rotating

speed of the drum and the horn

when FAST is activated via footswitch

(see (8) ). The range does not overlap

with the SLOW control.

(2) The SLOW control adjusts the rotating

speed of the drum and the horn when

SLOW is activated via footswitch

(see (8)). The range does not overlap

with the FAST control.

(3) The DRIVE control adjusts the amount of

tube-like overdrive. In minimum position

the tube stage will be bypassed.

(4) The BLEND control adjusts the balance

between the horn and the drum

speaker. Turning it to the right will

boost the volume of the horn and lower

the volume of the drum.

(5) The RAMP switch controls the time it takes to go from fast to slow rotary speed and vice versa.

You can select between FAST, MED and SLOW ramp time.

(6) The MODEL switch selects between 3 famous signature rotary speakers (145, L16 and 122).

(7) The two color ON/BATT LED illuminates when active. The modulation is in slow mode when the

LED lights more red than blue, and it is in fast mode when the LED lights more blue than red.

The change from blue to red is synchronized with the actual modulation speed.

(8) Press the footswitch to activate/deactivate the eect. Hold the pedal depressed for 2 seconds in

order to switch between fast and slow modulation modes.

(9) Use the ¼" TS IN A and IN B connectors to plug in the instrument cables. For mono use plug

in IN A only.

(10) The two ¼" TS OUT A and OUT B connectors send the signal to your amp. Use both connectors if you

want to achieve full stereo rotary eect. For mono use plug in OUT A only.

Use the DC IN connection to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

◊ The RM600 has no on/o switch. As soon as you insert a plug into one of the in

connectors, the RM600 begins running. When not using the RM600, remove the

plugs from the in connectors. This extends the life of the battery.

The SERIAL NUMBER is located at the underside.

(1)

(7)

(4)

(6)

(8)

(10) (9)

(2)

(5)

(3)

ROTARY MACHINE RM600

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGEWITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE

MUSIC GROUP (MUSIC-GROUP.COM). ALLTRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS

WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHERWHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.

COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS

ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR

IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM

OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE,WITHOUT THE EXPRESS

Tortola, British Virgin Islands

◊ In rare cases interferences of the normal function may appear by external inuence

(e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this

occurs, please turn down the volume on subsequent ampliers and disconnect the input

connector briey to restart the application.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting

http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specications

In A

Connector ¼" TS

Impedance 500 kΩ

In B

Connector ¼" TS

Impedance 500 kΩ

Out A

Connector ¼" TS

Impedance 1 kΩ

Out B

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V𝌂, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

Europe/U.K./ 230 V~, 50 Hz

Australia

China 220 V~, 50 Hz

Korea 220 V~, 60 Hz

Japan 100 V~, 50/60 Hz

Power connector 2 mm DC jack,

negative center

Battery 9 V type 6LR61

Power 60 mA

consumption

Physical/Weight

Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"

(H x W x D) approx. 54 x 70 x 123 mm

Weight approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing

products without prior notice. Specifications and appearance

may therefore differ from those listed or shown.

Inhaltsverzeichnis

Andere Behringer Musikpedal Handbücher

Behringer

Behringer BASS LIMITER ENHANCER BLE400 Bedienungsanleitung

Behringer

Behringer Ultra Fuzz UZ400 Bedienungsanleitung

Behringer

Behringer FD300 Bedienungsanleitung

Behringer

Behringer V-TONE ACOUSTIC ADI21 Bedienungsanleitung

Behringer

Behringer HELLBABE HB01 Bedienungsanleitung

Behringer

Behringer Tube Overdrive TO100 Bedienungsanleitung

Behringer

Behringer HELLBABE HB01 Bedienungsanleitung

Behringer

Behringer Noise Reducer NR300 Bedienungsanleitung

Behringer

Behringer DIGITAL REVERB DR600 Bedienungsanleitung

Behringer

Behringer CHROMATIC TUNER TU300 Bedienungsanleitung

Behringer

Behringer OCTAVE DIVIDER Bedienungsanleitung

Behringer

Behringer BASS LIMITER ENHANCER BLE400 Bedienungsanleitung

Behringer

Behringer PEDAL BOARD PB1000 Bedienungsanleitung

Behringer

Behringer OVERDRIVE OD400 Bedienungsanleitung

Behringer

Behringer B-Control NANO BCN44 Bedienungsanleitung

Behringer

Behringer TUBE AMP MODELER TM300 Bedienungsanleitung

Behringer

Behringer CHORUS SPACE-C CC300 Bedienungsanleitung

Behringer

Behringer Spectrum Enhancer SE200 Bedienungsanleitung

Behringer

Behringer ULTRA CHORUS UC200 Bedienungsanleitung

Behringer

Behringer AM100 Bedienungsanleitung

Behringer

Behringer ULTRA METAL UM300 Bedienungsanleitung

Behringer

Behringer Heavy Metal HM300 Bedienungsanleitung

Behringer

Behringer V-Tone Acoustic ADI21 Bedienungsanleitung

Behringer

Behringer ULTRA VIBRATO UV300 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung

Tube Works

Tube Works 310 Bedienungsanleitung

EarthQuaker Devices

EarthQuaker Devices Tentacle Bedienungsanleitung