Behringer RV600 Bedienungsanleitung

REVERB MACHINE RV600

Ultimate Reverb Modeling Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER REVERB MACHINE RV600.

This ultimate eects pedal is specically designed to deliver 24-bit, high-resolution stereo reverbs

comparable to state-of-the-art studio processors. Thanks to its 11 well-known modes and the extensive

parameter control that allow for maximum creativity, you’ll have plenty of great sounds at your disposal

for every situation.

1. Controls

(1) The TONE control allows you to shape

your overall sound.

(2) The MIX control determines the amount

of reverb added to the signal.

(3) The DECAY control determines how

quickly the reverb fades. In ECHO

mode, it determines the amount of

signal feedback.

(4) The blue ON/BATT LED illuminates when

the eect is activated. It also serves as a

battery level indicator.

(5) The TIME control determines the

pre-delay time, that is, the delay time

between the original dry sound and the

actual, audible reverb eect. In SPACE

mode, it determines the harmonic

density of the signal.

(6) This control lets you choose one of the eleven reverb type eects:

ECHO: Very fat echo with reverb.

TILE: Emulates the acoustics of a tiled room with bright early reections, like a bathroom.

CAVE: Deep and large echo, like being inside a cave.

SPACE: Ambiental, lush reverb with a dense, harmonized, octave-shifted content.

DUCKNG: Hall reverb with a ducking eect. The reverb “ducks” under your instrument’s signal

while you are playing to avoid clouding your sound, and reemerges when you stop, adding a rich

and smooth tail to it.

HALL: Bright and open reverb that simulates the reections of a concert hall.

CHMBR: Emulates the highly reective acoustics of a typical reverb chamber.

ROOM: Clear and natural acoustics of a room.

PLATE: Metallic, resonant sound of a plate reverb.

SPRING: Simulates the distinct and beloved sound of a spring reverb.

‘63 SP: Emulates the classic sound of a 1963 guitar combo spring reverb.

(7) With the TRAILS switch turned on, the reverb will smoothly fade away once you bypass the eect

instead of simply being cut o.

(8) Use the two ¼" TS connectors IN A and IN B to plug in a stereo input signal. For mono signals

connect to IN A.

(9) The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both outputs to

achieve a full stereo eect. For mono use, connect to OUT A.

(10) Use the footswitch to activate/deactivate the eect.

(1)

(2)

(7)

(6)

(10)

(5)

(3)

(9) (8)

(4)

REVERB MACHINE RV600

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK,

MIDAS, BUGERA, ANDTURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).. ALL TRADEMARKS ARETHE PROPERTY OF THEIR RESPECTIVE OWNERS.

MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSSWHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHERWHOLLY OR IN PART UPON ANY DESCRIPTION,

PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH

AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND

MUSICGROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OFTHIS MANUAL MAY BE REPRODUCED

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE,

P.O. Box 146, Road Town,Tortola, British Virgin Islands

Use the DC IN connection to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

◊ The RV600 has no on/o switch. As soon as you insert the plug into the in connector,

the RV600 is on. When not using the RV600, remove the plug from the in connector.

This extends the life of the battery.

The SERIAL NUMBER is located at the bottom.

◊ In rare cases interferences of the normal function may appear by external inuence

(e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this

occurs, please turn down the volume on subsequent ampliers and disconnect the input

connector briey to restart the application.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting

http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specications

In A

Connector ¼" TS

Impedance 500 kΩ

In B

Connector 1/4" TS

Impedance 500 kΩ

Out A

Connector ¼" TS

Impedance 1 kΩ

Out A

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V𝌂, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

China/Korea 220 V~, 50 Hz

U.K./Australia 240 V~, 50 Hz

Europe 230 V~, 50 Hz

Japan 100 V~, 50 - 60 Hz

Power connector 2 mm DC jack, negative center

Battery 9 V type 6LR61

Power consumption 30 mA

Physical/Weight

Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"

(H x W x D) approx. 54 x 70 x 123 mm

Weight approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing

products without prior notice. Specifications and appearance

may therefore differ from those listed or shown.

Inhaltsverzeichnis

Andere Behringer Musikpedal Handbücher

Behringer

Behringer WARP DISTORTION WD300 Bedienungsanleitung

Behringer

Behringer ROTARY MACHINE RM600 Bedienungsanleitung

Behringer

Behringer V-Tone Acoustic ADI21 Bedienungsanleitung

Behringer

Behringer Overdrive/Distortion Bedienungsanleitung

Behringer

Behringer BASS LIMITER ENHANCER BLE400 Bedienungsanleitung

Behringer

Behringer Ultra Bass Chorus BUC400 Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Behringer

Behringer BASS OVERDRIVE BOD400 Bedienungsanleitung

Behringer

Behringer Digital Multi-FX FX600 Bedienungsanleitung

Behringer

Behringer Chorus Space-D CD400 Bedienungsanleitung

Behringer

Behringer DISTORTION-X XD300 Bedienungsanleitung

Behringer

Behringer TUBE AMP MODELER TM300 Bedienungsanleitung

Behringer

Behringer ULTRA CHORUS UC200 Bedienungsanleitung

Behringer

Behringer TUBE AMP MODELER TM300 Bedienungsanleitung

Behringer

Behringer CHORUS ORCHESTRA CO600 Bedienungsanleitung

Behringer

Behringer ULTRA METAL UM100 Bedienungsanleitung

Behringer

Behringer COMPRESSOR/LIMITER CL9 Bedienungsanleitung

Behringer

Behringer MIDI FOOT CONTROLLER FCB1010 Bedienungsanleitung

Behringer

Behringer Noice Reducer NR100 Bedienungsanleitung

Behringer

Behringer Bass Chorus BCH100 Bedienungsanleitung

Behringer

Behringer Echo Machine EM600 Bedienungsanleitung

Behringer

Behringer Spectrum Enhancer SE200 Bedienungsanleitung

Behringer

Behringer Foot Controller FCV100 Bedienungsanleitung

Behringer

Behringer Vintage Phaser VP1 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung

Tube Works

Tube Works 310 Bedienungsanleitung

EarthQuaker Devices

EarthQuaker Devices Tentacle Bedienungsanleitung