Beijer Electronics EPC T170/170 C2D Nautic Bedienungsanleitung

EPC C2D Nautic

Installation Manual

MAEN979B, 2010-08

English

Cover_MAEN979B.fm Page 1 Tuesday, August 24, 2010 11:13 AM

Foreword

Beijer Electronics, MAEN979B

EPC C2D Nautic Installation Manual

Foreword

The EPC C2D Nautic series consists of enhanced Panel IPCs, compatible with

the toughest of maritime environments. Shock and vibration resistant and func-

tional throughout comprehensive temperature changes, the series features a

robust hard-disk drive, fanless CPU and Windows XP as the standard operating

system.

The series also offers the option of modifying a number of its features, affording

a customized version with a flash-memory, fanless chassis and Windows XP

embedded.

The rugged EPC C2D Nautic series provides an open platform solution that can

be utilized with the customer’s choice of software to meet the demands of any

marine environment with high performance reliability that’s built to last.

This manual describes each model and gives instructions on installation, opera-

tion and service.

Please read the entire installation manual prior to installing and using this equipment. Only qualified

personnel may install, operate or repair this equipment. Beijer Electronics AB, including all its group

companies, is not responsible for modified, altered or renovated equipment. Because the equipment has a

wide range of applications, users must acquire the appropriate knowledge to use the equipment properly

in their specific applications.

Persons responsible for the application and the equipment must themselves ensure that each application

is in compliance with all relevant requirements, standards and legislation in respect to configuration and

safety. Only parts and accessories manufactured according to specifications set by Beijer Electronics AB

may be used.

BEIJER ELECTRONICS AB, INCLUDING ALL ITS GROUP COMPANIES, SHALL NOT BE

LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSE-

QUENTIAL DAMAGES RESULTING FROM THE INSTALLATION, USE OR REPAIR OF THIS

EQUIPMENT, WHETHER ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER'S

SOLE REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND OF PURCHASE

PRICE, AND THE CHOICE OF THE APPLICABLE REMEDY SHALL BE AT THE SOLE DIS-

CRETION OF BEIJER ELECTRONICS AB.

Contents

Beijer Electronics, MAEN979B

Contents

1 Safety Precautions................................................................................... 5

1.1 Nautic Approvals and Certificates .......................................................5

1.2 General ...............................................................................................6

1.3 During Installation..............................................................................7

1.4 During Use .........................................................................................7

1.5 Service and Maintenance.....................................................................8

1.6 Dismantling and Scrapping.................................................................8

2 Product Naming ..................................................................................... 9

3 Supplied Equipment ............................................................................. 10

4 Compass Safety Distance ...................................................................... 11

5 Description of Parts.............................................................................. 12

5.1 EPC C2D Nautic..............................................................................12

5.2 Display..............................................................................................13

5.3 Communication Ports .....................................................................14

5.4 Motherboard.....................................................................................15

5.5 Assembly...........................................................................................15

5.6 Power Supply ....................................................................................16

5.7 Earthing System ................................................................................17

5.8 ATX Power Switch............................................................................17

5.9 ATX Remote Connector ...................................................................18

5.10 Compact Flash Memory Card...........................................................18

6 Operation ............................................................................................. 19

6.1 Operating System..............................................................................19

6.2 Default BIOS Settings.......................................................................20

6.3 Important Items Regarding Software Installation ..............................23

6.4 Graphic Board Installation ................................................................24

6.5 Touch Screen Installation..................................................................25

6.6 Installation of LAN-/Network Card ..................................................29

Contents

Beijer Electronics, MAEN979B

7 Service .................................................................................................. 31

7.1 Introduction......................................................................................31

7.1.1 Tools .................................................................................................31

7.1.2 Preparation........................................................................................31

7.1.3 Opening the EPC..............................................................................31

7.2 Changing the Fan Filter.....................................................................32

7.3 PCI-board Installation.......................................................................32

7.4 Cable Fixing Points ...........................................................................36

8 Technical Data ..................................................................................... 37

9 Drawings .............................................................................................. 39

9.1 EPC T150/150 C2D Nautic Front View .........................................39

9.2 EPC T150/150 C2D Nautic Cut Out Drawing................................40

9.3 EPC T150/150 C2D Nautic Outline Drawings................................41

9.4 EPC T170/170 C2D Nautic Front View .........................................42

9.5 EPC T170/170 C2D Nautic Cut Out Drawing................................43

9.6 EPC T170/170 C2D Nautic Outline Drawings................................44

9.7 EPC T190/190 C2D Nautic Front View .........................................45

9.8 EPC T190/190 C2D Nautic Cut Out Drawing................................46

9.9 EPC T190/190 C2D Nautic Outline Drawings................................47

9.10 EPC Box C2D Nautic Outline Drawings..........................................48

Safety Precautions

Beijer Electronics, MAEN979B 5

1SafetyPrecautions

Both the installer and the owner and/or operator of the EPC must read and un-

derstand this installation manual.

1.1 Nautic Approvals and Certificates

The EPC C2D Nautic series are certified according to the following list. Some

approvals are in progress. Please visit our web site for the latest information.

Model CE LR BV GL DNV ABS RS EN

60945

EPC T150/150 C2D Nautic XXXXXXX X*

EPC T170/170 C2D Nautic XXXXXXX X*

EPC T190/190 C2D Nautic XXXXXXX X*

EPCBoxC2DNautic XXXXXXX X*

* Also for bridge applications

Approval/Certificate Abbreviation

Conformité Européenne CE

Lloyd’s Register LR

Bureau Veritas BV

Germanischer Lloyd GL

Det Norske Veritas DNV

American Bureau of Shipping ABS

Russian Maritime Register of Shipping RS

Safety Precautions

6Beijer Electronics, MAEN979B

1.2 General

– The EPC is intended for industrial use only.

– The EPC is constructed for naval applications and for indoor use according

to IEC 60945.

– Read the safety precautions carefully.

– Check the delivery for transportation damage. If damage is found, notify the

supplier as soon as possible.

– Do not use the EPC in an environment with high explosive hazards.

– The supplier is not responsible for modified, altered or reconstructed equip-

ment.

– Use only parts and accessories manufactured according to specifications of the

supplier.

– Read the installation and operating instructions carefully before installing, us-

ing or repairing the EPC.

– Never allow fluids, metal filings or wiring debris to enter any openings in the

EPC. This may cause fire or electrical shock.

– Only qualified personnel may operate the EPC.

– Storing the EPC where the temperature is lower/higher than recommended

in this manual can cause the LCD display liquid to congeal/become isotopic.

– The LCD display liquid contains a powerful irritant. In case of skin contact,

wash immediately with plenty of water. In case of eye contact, hold the eye

open, flush with plenty of water and get medical attention.

– The figures in this manual serves an illustrative purpose. Because of the many

variables associated with any particular installation, the supplier cannot as-

sume responsibility for actual use based on the figures.

– The supplier neither guarantees that the EPC is suitable for your particular

application, nor assumes responsibility for your product design, installation

or operation.

Safety Precautions

Beijer Electronics, MAEN979B 7

1.3 During Installation

– The EPC is designed for stationary installation on a plane surface, where the

following conditions are fulfilled:

• no high explosive risks

• no strong magnetic fields

•nodirectsunlight

• no large, sudden temperature changes

– Install the EPC according to the accompanying installation instructions.

– Ground the EPC according to the accompanying installation instructions.

– Only qualified personnel may install the EPC.

– Separate the high voltage, signal and supply cables.

– Make sure that the voltage and polarity of the power source is correct before

connecting the EPC to the power outlet.

– Peripheral equipment must be appropriate for the application and location.

– The controlling transformer has to comply with EN60742.

1.4 During Use

– Keep the EPC clean.

– Emergency stop and other safety functions may not be controlled from the

EPC.

– Do not use too much force or sharp objects when touching the keys, touch

screen etc.

Safety Precautions

8Beijer Electronics, MAEN979B

1.5 Service and Maintenance

– Only qualified personnel should carry out repairs.

– The agreed warranty applies.

– Before carrying out any cleaning or maintenance operations, disconnect the

equipment from the electrical supply.

– Clean the display and surrounding front cover with a soft cloth and mild de-

tergent.

– Replacing the battery incorrectly may result in explosion. Only use batteries

recommended by the supplier.

1.6 Dismantling and Scrapping

– The EPC or parts thereof shall be recycled according to local regulations.

– The following components contain substances that might be hazardous to

health and the environment: lithium battery, electrolytic capacitor and dis-

play.

Product Naming

Beijer Electronics, MAEN979B 9

2ProductNaming

The naming of the computers is constructed with a number of parameters that

indicate the characteristics of each model, for example EPC T170 C2D Nautic

AC according to below:

There is a variant without display; EPC C2D Box Nautic AC:

EPC T 170 C2D Nautic AC

Computer

series Optionaltouch

screen Screen

size Processor

type Main

usage Type of

power supply

EPC C2D Box Nautic AC

Computer

series Processor type No display Main

usage Type of

power supply

Supplied Equipment

10 Beijer Electronics, MAEN979B

3 Supplied Equipment

Part Description

CD; operating system CD with operating system.

CD; driver software Driver software CD for all pre-installed components

such as mother board, touch screen, keyboard etc.

Power cable Standard power cable (European or US standard) for

units with 230 V AC power supply.

Length: approximately 3.0 m.

24 V DC units are delivered without cable.

A variety of cables are available separately.

Installation manual This manual describes specific information about

Beijer Electronics products only – not about third

party components.

Note:

Separate documentation of third party components is

included on the enclosed driver software CD + as

printed documentation.

Mounting kit Screws, nuts etc.

Sticker Device sticker with device name and part number

Note:

Place the sticker on the front of the device when

mounting, to identify device while installing and at

startup.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Beijer Electronics Touchscreen Handbücher

Beijer Electronics

Beijer Electronics X2 pro 15-B2 Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 marine 7-B2 Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 extreme 15 HP web Bedienungsanleitung

Beijer Electronics

Beijer Electronics iX T15BM-HB Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 extreme 12 CO Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 base 10 v2 HP Bedienungsanleitung

Beijer Electronics

Beijer Electronics iX T15BR-HP-HB Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 pro 7-B2 2eth Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 marine 15 - B2 Bedienungsanleitung

Beijer Electronics

Beijer Electronics T15BM Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 pro 7-B2 Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 pro 15 web Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 marine 7-B2 SC Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 extreme 15 HP Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 marine 15-B2 SC Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 pro 4-B2 Bedienungsanleitung

Beijer Electronics

Beijer Electronics iX T15C - C23 Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 pro 10-B2 Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 base 10 Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 extreme 15 Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung