Belden Grass Valley MCP 450 Bedienungsanleitung

3922 496 32291 February 2018 v1.1

Software v1.3.0.0

MCP 450

User’s Guide

Master Control PC

others, and the use or communication of the contents thereof, are forbidden without

express authority. All rights are reserved in the event of the grant of a patent or the

registration of a utility model or design. Liable to technical alterations in the course of

further development.

Trademarks

Grass Valley, MCP Series, LDX Series and derivatives are trademarks of Belden Inc. or

Grass Valley Canada. All other tradenames referenced are service marks, trademarks,

or registered trademarks of their respective companies.

Website

Visit the Grass Valley public website to download the latest user’s guide updates and

additional information about your broadcast product:

www.grassvalley.com

MCP 450 Master Control PC User’s Guide (v1.1) 3

Table of contents

Chapter 1 – Introduction

1.1 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.2 Embedded Box Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1.4 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

1.5 Screen layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

1.5.1 Single camera mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.5.2 Multiple camera mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 2 – Installation

2.1 Connecting the embedded box computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

2.2 Setting up the embedded box computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.2.1 Power up configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.2.2 Screen resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.2.3 Changing network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.3 Setting up the MCP application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.3.1 Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

2.3.2 HW Model Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.3.3 Serial nr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

2.3.4 PID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.3.5 IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 3 – Operation

3.1 Operating a single camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1.1 Switching to single camera mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1.2 Function sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

3.1.3 Function field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

3.1.4 Changing values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.1.5 Secondary color corrector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.2 Operating multiple cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.2.1 Multiple camera mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.2.2 Function sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

3.2.3 Function matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

3.2.4 Changing values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.2.5 Operating combined functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.2.6 Monitoring cameras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.3 Selecting functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.3.1 Opening the Function Select window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.3.2 Selecting function groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.3.3 Selecting single functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.3.4 Selecting all functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4MCP 450 Master Control PC User’s Guide (v1.1)

3.4 Selecting cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

3.4.1 Information display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

3.4.2 Selecting a camera (in single camera mode) . . . . . . . . . . . . . . . . . . . . . . . . . . .28

3.4.3 Selecting cameras (in multi camera mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.5 Managing groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.5.1 Creating a new group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3.5.2 Editing a group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

3.5.3 Renaming a group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

3.5.4 Deleting a group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.6 Managing files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

3.6.1 File management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

3.6.2 Scene files menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

3.6.3 Scene file actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

3.6.4 Controlling multiple files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

3.6.5 Editing files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

3.7 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

3.7.1 Diagnostics screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.7.2 Ref Available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

3.7.3 Gen. Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

3.7.4 Camera Comm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

3.7.5 Basestation Comm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

3.7.6 OCP Comm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.7.7 Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.7.8 C->BS FibCable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.7.9 C->BS FibSignal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.7.10 BS->C FibCable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.7.11 BS->C FibSignal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.7.12 Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

3.7.13 C->BS TrSignal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.7.14 BS->C TrSignal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Chapter 4 – Specifications

4.1 Specifications for MCP 450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

4.2 Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

4.3 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

MCP 450 Master Control PC User’s Guide (v1.1) 5

Recycling

Visit www.grassvalley.com for recycling information.

Packing for return

If a unit is being returned to Grass Valley for servicing, try to use the containers and materials

of the original packaging. Attach a tag indicating the type of service required, return address,

model number, full serial number and the return number which will be supplied by your Grass

Valley service centre.

If the original packing is not available or can no longer be used contact your regional Grass

Valley service representative to have a return package provided.

6MCP 450 Master Control PC User’s Guide (v1.1)

MCP 450 Master Control PC User’s Guide (v1.1) 7

Chapter 1 - Introduction

Chapter 1

Introduction

1.1 Application

The MCP 450's centralized camera control and network monitoring allow you to get more done

in less time. Interpret and log all your network activity between cameras and control panels.

Efficient data-gathering capabilities and a spreadsheet-like interface enables you to review all

camera settings and make across-the-board or camera-by-camera adjustments. The save and

share camera and production capabilities allow you to take advantage of standard USB storage

media—just save, email and upload settings from one event or venue to the next.

The MCP 450 allows you to control up to 99 Grass Valley cameras. The compact and

ergonomic MCP 450 operates within a standard Ethernet-based camera control network using

TCP/IP as its communication protocol.

The MCP 450 not only controls all camera functions, it can also be used to change the menu

settings of all Grass Valley XCU/Base Stations. Extensive setup functions for the MCP 450

itself, the camera and XCU/Base Station are available.

The user interface is designed for convenience, with menu accessible functions for detailed

setup and a clear display of current values.

☞Note

The MCP 450 can control many different types of camera. Depending on the type of camera to

which the MCP 450 is connected, not all functions may be available. The values available are

also camera and configuration dependent.

1.2 Embedded Box Computer

The MCP 450 Master Control PC application runs on a compact and powerful Embedded Box

Computer. All hardware is built into a small form factor, ruggedized housing that allows for easy

installing or embedding in any application or situation. The solid and heavy-duty case offers

vibration and dust resistance while also providing a passive cooling (fan-less) solution.

8MCP 450 Master Control PC User’s Guide (v1.1)

Chapter 1 - Introduction

☞Note

Do NOT install any other applications onto the Embedded Box Computer and do NOT change

the Windows settings as this may reduce the reliability of the MCP 450.

1.3 Features

• Supports C2IP camera control interface protocol supported by all Grass Valley LDX Series,

LDX Compact and LDK cameras;

• Fast and full graphical control of all camera and XCU/Base Station functions;

• Matrix function provides full overview of all cameras connected to the C2IP network

simultaneously and supports the control of multiple cameras at the same time;

• Uses off-the-shelf IT-network infrastructure. Based on IP connectivity - standard

IEEE 802.3 10/100 Mb Ethernet;

• Ability to define sets of camera and control-function groups make it very easy to have the

right set within reach during any stage of the production;

• Direct access to camera system diagnostics, including warning dialog functionality;

• Transfer of operational parameters between cameras;

• Connects to any VGA or HDMI monitor (or a DVI-D monitor with a HDMI to DVI-D cable) or

touchscreen display.

MCP 450 Master Control PC User’s Guide (v1.1) 9

Chapter 1 - Introduction

1.4 Configuration

Typically, a single MCP 450 can control the full C2IP camera network. The IP address and other

options for the Ethernet connection can be set up in the MCP setup menu.

☞Note

When an MCP 450 is present in a C2IP network, up to three more Operational Control Panels

(OCPs) can be connected to the same camera.

XCU 1

XCU 2

XCU #n

Camera 1

Camera 2

Camera #n

OCP 400

C2IP

MCP 450

On Air/Tally

signal

1 Gb switch

10 MCP 450 Master Control PC User’s Guide (v1.1)

Chapter 1 - Introduction

1.5 Screen layout

1.5.1 Single camera mode

The single camera mode can be used to control one specific camera in the system. At the top

right of the screen, tap Video Adjust in the main menu to switch to single camera mode.

Function groups

- displays function groups

of the selected set

Function field

- displays functions and

their values

Main menu

- selects camera operation mode

- manages groups of functions

- manages files

Diagnostics

- provides a quick

status overview of

the system

Call button

- sends Call signal

to camera operator

Screen lock

- locks screen

Selected function

- displays the current

function

Camera selection

- displays currently selected camera

- select a camera

- define and maintain groups of

cameras

Analog settings and value controls

- displays the analog settings for the

selected function

- change the value of a function by

clicking/tapping the up and down

arrows or click and use the mouse

scroll wheel

Inhaltsverzeichnis

Andere Belden Steuerungssystem Handbücher

Belden

Belden Miranda NV920 Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung