Belimo ZTH Series Kurzanleitung

Firmware Upgrade

ZTH-…

www.belimo.eu

T9-ZTH Firmware Upgrade • en • 02.2013

1 / 2

Firmware Upgrade of ZTH devices



Simplest use



No special material required



Actual Upgrade version:

ZTH-GEN V4.50

Type Overview

Type Description

ZTH-GEN Service-Tool for Belimo actuators (MF, MP, LON, MOD,...) and VAV controllers

ZTH-VAV Service-Tool for Belimo VAV controllers

General information

•The Firmware Upgrade may be applied only to devices listed in the type overview.

•The instructions concerning setup and workflow must be observed. Belimo assumes no

responsibility for devices, which are no longer usable due to inappropriate handling.

Required Material

Material

Obtaining

Notebook with Windows XP / 7 and free USB interface

Level converter ZIP-USB-MP with automatic MA/MO switching,

incl. USB cable

Belimo Sales

USB device driver for ZIP-USB-MP,

driver is usually pre-installed by the Belimo PC-Tool

Belimo Web

Connecting cable RJ12 to RJ12 (6P/6C),

e. g. Belimo ZK6-GEN (from September 2010)

Belimo Sales

Programming software "ZTH-Updater Vx_xx.exe",

Executable program incl. ZTH firmware

Belimo Web

Optional:

- quick start guide, can be affixed to the rear of the device

- for upgrade of ZTH-VAV: Sticker "ZTH-GEN" for the front of the device

Belimo Sales









ZTH-

Firmware Upgrade

2 / 2

T9-ZTH Firmware Upgrade • en • 02.2013

www.belimo.eu

Workflow

Preparation

Connect level converter ZIP-USB-MP to the computer. If the required device driver is not installed on

the computer, it can be downloaded from the Belimo Web (administrator privileges required).

The ZTH-Updater software can be downloaded from the Belimo Web. No installation is required.

Upgrade

1. Start ZTH-Updater Vx_xx

2. Select COM-Port

3. Click "Update SW…"

4. Keep the Minus button (-) pressed while connecting the ZTH device to the ZIP-USB-MP

5. Wait for completion of update process

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒



ZTH will restart!

6. Check Welcome screen of the ZTH

BELIMO ZTH-GEN

HW 1.1 SW:4.xx

7. Disconnect ZTH device from ZIP-USB-MP

For the upgrade of further devices continue with step 3.

Post processing

The ZTH device is immediately ready to use. If required, the settings in the configuration menu can

be checked and adjusted.

Optional: Affix the newest quick start guide to the rear of the device.

Optional, for ZTH-VAV adjustment devices: The ZTH-VAV lettering on the front may be paste over

with an orange ZTH-GEN sticker.

Troubleshooting

ZIP-USB-MP not recognized

- Download and install USB device driver from Belimo Web (administrator privileges required)

COM-Port cannot be opened

- ZIP-USB-MP must be connected before starting the ZTH-Updater tool.

- Check COM Port (Windows control panel)

- Close potential conflict software (PC-Tool, synchronisation software, …)

Update process does not start

- Keep the Minus button (-) pressed while connecting the tool to the actuator.

- Check connecting cable, 6-core version required!

Dieses Handbuch passt für folgende Modelle

Andere Belimo Controller Handbücher

Belimo

Belimo FS Series Gebrauchs- und Pflegehandbuch

Belimo

Belimo AF120 US Bedienungsanleitung

Belimo

Belimo NMV-D3-RE2-SET Bedienungsanleitung

Belimo

Belimo NMB24-SR Bedienungsanleitung

Belimo

Belimo NFBUP Bedienungsanleitung

Belimo

Belimo AF24-SR US Stücklistenhandbuch

Belimo

Belimo AR 24-3 Series Bedienungsanleitung

Belimo

Belimo CR24 Series Bedienungsanleitung

Belimo

Belimo AMX24-SR-X1 Bedienungsanleitung

Belimo

Belimo AVK230A-3 Bedienungsanleitung

Belimo

Belimo ZSN-BF Bedienungsanleitung

Belimo

Belimo VAV-Compact D3 Bedienungsanleitung

Belimo

Belimo NM24A-MP Bedienungsanleitung

Belimo

Belimo SRF230A-S2-5-O Bedienungsanleitung

Belimo

Belimo CMB24-3 Bedienungsanleitung

Belimo

Belimo LRQ24A Bedienungsanleitung

Belimo

Belimo CQB24-3 Bedienungsanleitung

Belimo

Belimo NKQB24-1 Bedienungsanleitung

Belimo

Belimo SRF24A-SR Bedienungsanleitung

Belimo

Belimo HR series Bedienungsanleitung

Belimo

Belimo AFX24LON Bedienungsanleitung

Belimo

Belimo LF24-SR-E US Bedienungsanleitung

Belimo

Belimo NF24A-MOD Bedienungsanleitung

Belimo

Belimo AF24-LIN US Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung