Belkin F5U513 Bedienungsanleitung
En
Fr
De
Nl
Es
It
FireWire
Notebook Adapter
Connect your iPod™, camcorder, FireWire®, and
Sony® i.LINK® devices to your PC
User Manual
F5U513ea
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 1
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 2
En
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . .3
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Windows 98 SE Driver Installation . . . . . . . . . . . . . . . . . . . . . .5
Windows ME Driver Installation . . . . . . . . . . . . . . . . . . . . . . . .6
Windows 2000/XP Driver Installation . . . . . . . . . . . . . . . . . . . .7
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 3
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 4
1
INTRODUCTION
Thank you for purchasing the Belkin FireWire Notebook
Adapter (the Adapter).
Now you can add three 400Mbps FireWire ports to your Windows 98 SE,
Me, 2000, or XP operating system and enjoy the ultrafast speed and
Plug-and-Play ease of next-generation FireWire devices.
En
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 1
2
OVERVIEW
Specifications
• 3 external 6-pin IEEE 1394 ports
• OHCI 1.0-compliant
• IEEE 1394a 2.0-compliant
• Texas Instruments TSB12LV23 OHCI-Lynx 1394 Link Layer Host
Controller
• Texas Instruments TSB41LV02 Digital to Analog transceiver
• Supports 100/200/400Mbps data rates
• PC 98 & PCI Power Management v1.0-compliant
• 3.3V operation for CardBus to IEEE 1394 interface
• Optional AC adapter requirements:
Voltage: 12V DC
Current: 1.6 Amps
Plug Size: 3.8mm
Plug Polarity: Center positive
Note: Optional AC adapter is usually only required for devices that do not
provide their own power source such as web cameras, certain
scanners, and certain pocket hard-disk drives.
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 2
3
OVERVIEW
Minimum System Requirements
• 266MHz Pentium® II (700MHz PIII recommended for video editing)
• 32MB RAM (128MB recommended for video editing)
• Windows® 98 SE, Me, 2000, XP
• 32-bit Type II CardBus slot (Check your laptop owner’s manual for
CardBus slot specifications)
Package Contents
• Belkin FireWire Notebook Adapter
• User Manual
En
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 3
4
HARDWARE INSTALLATION
1. Examine your laptop computer and locate the CardBus slot(s).
2. Insert the Adapter into a free 32-bit Type II CardBus slot.
3. Apply power to the laptop and let Windows start normally.
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 4
5
WINDOWS 98 SE
DRIVER INSTALLATION
1. When Windows has finished loading, the “New Hardware Wizard” will
launch and display a window that identifies the Adapter as a “Texas
Instruments OHCI Compliant IEEE 1394 Host Controller”. Click “Next”.
2. Select “Search for the Best Driver for Your Device (Recommended)”.
Click “Next”.
3. Leave all boxes unchecked. Click “Next”.
4. The “New Hardware Wizard” will now prompt you to select the driver
you wish to install. Select “The Updated Driver (Recommended)”. Click
“Next”.
5. The “New Hardware Wizard” will now locate and install the proper
driver. Click “Next”.
6. You may be prompted to insert your Windows 98 installation CD.
7. Hardware installation is now complete. Click “Finish”.
8. To confirm that the Adapter has been properly installed, open the
Windows “System Properties” window and click the “Device Manager”
tab. In the list of installed devices, click the “+” sign next to the
entry for “IEEE 1394 Bus Controller”. You should find an entry for
“Texas Instruments OHCI Compliant IEEE 1394 Host Controller”.
En
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 5
6
WINDOWS ME
DRIVER INSTALLATION
1. When Windows has finished loading, the “New Hardware Wizard” will
launch and display a window that identifies the Adapter as a “Texas
Instruments OHCI Compliant IEEE 1394 Host Controller”.
2. Select “Automatic search for a better driver”. Click “Next”.
3. Windows will search its driver database and automatically install the
correct driver. Click “Finish”. You will be prompted to restart your
computer. Click “Yes”. Installation is now complete.
4. To confirm that the Adapter has been properly installed, open the
Windows “System Properties” window and click the “Device Manager”
tab. In the list of installed devices, click the “+” sign next to the
entry for “IEEE 1394 Bus Controller”. You should find an entry for
“Texas Instruments OHCI Compliant IEEE 1394 Host Controller”.
P74414ea_F5U513ea_manual_uk 11-08-2003 12:09 Page 6
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Belkin Adapter Handbücher
Belkin
Belkin F1D082 Bedienungsanleitung
Belkin
Belkin ExpressCard N Bedienungsanleitung
Belkin
Belkin P73366-A Bedienungsanleitung
Belkin
Belkin F6D4050 Bedienungsanleitung
Belkin
Belkin F5L014 Bedienungsanleitung
Belkin
Belkin F5D9050 Bedienungsanleitung
Belkin
Belkin Headphone Adapter Bedienungsanleitung
Belkin
Belkin F5L064 Bedienungsanleitung
Belkin
Belkin F5D7050 Bedienungsanleitung
Belkin
Belkin F5U276ea Bedienungsanleitung
Belkin
Belkin F7D4550 Bedienungsanleitung
Belkin
Belkin F5U541 Bedienungsanleitung
Belkin
Belkin F5D4077 Bedienungsanleitung
Belkin
Belkin F8E478ea Bedienungsanleitung
Belkin
Belkin F5L014 Bedienungsanleitung
Belkin
Belkin F5D7050ceE Bedienungsanleitung
Belkin
Belkin F5D6050 Referenzhandbuch
Belkin
Belkin MP0006 Bedienungsanleitung
Belkin
Belkin F5D5055 Bedienungsanleitung
Belkin
Belkin Smartbeam F5U235ea Bedienungsanleitung
