Belkin NetMaster F8E204 Bedienungsanleitung

P73134 F8E204

NetMaster™

Scroll Mouse

User Manual

Guide d’utilisation de la

souris NetMaster™avec

roulette de défilement

Manual de usuario para el

mouse NetMaster™con

rueda de desplazamiento

Mouse de Rolagem

NetMaster™- Manual

do Usuário

Table of Contents

English . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Français (Canada) . . . . . . . . . . . . . . . . . . 15

Español . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Português . . . . . . . . . . . . . . . . . . . . . . . . 43

ABOUT YOUR MOUSE

1.1 An Introduction to your new Belkin

NetMaster™Scroll Mouse

The Belkin NetMaster™Scroll Mouse offers you ease of use

on the Internet, eliminating the need for scroll bars. You can

scroll smoothly through your documents or Web Pages,

browsing them quicker and more efficiently. Imagine, with

the simple movement of the scroll wheel, you can glide

effortlessly through Web Pages and long documents, without

having to remove your pointer from the document itself.

Also, by eliminating this simple task, you can add to the

lifetime of your mouse by reducing natural wear and tear.

Not to mention the reduced tension on your wrist from

excessive, repetitive movement to the scrollbars. Internet

surfing couldn't be easier!

Once the software has been loaded onto your computer, the

center button of your mouse (the wheel) can be programmed

to perform the same tasks as:

"Left Button Double Click"

"F1" through "F12"

"Enter" Key

"Page Up" Key

"Page Down" Key

"Home" Key

"End" Key

These can be used in place of your scrolling options.

1. Introduction

1. Introduction (continued)

1.2 Connecting Your Mouse

Your mouse connects to either a PS/2 (or 6 pin MiniDIN) mouse

port or a 9-pin serial port. To check, look in the back of you

computer for the port that is designated for your mouse. Most

PCs will have the word MOUSE marked next to the PS/2

connector. Older PCs will have either Serial 1 (and up) or COM

1 (and up) for the serial connector. If you are still unsure, please

refer to your hardware manual.

For PS/2 mouse port installation, simply remove the serial

adapter before connecting the mouse cable to the computer.

a. Locate the computer PS/2 mouse port or Serial port on the

back of your computer.

b. Plug your mouse into the appropriate port suggested

above. Check the box in which your mouse was shipped to

verify the ports supported.

c. If applicable, tighten down the connector thumbscrews.

d. Turn your computer on. At this point, your mouse will work

with the built in Microsoft®Operating System. To use the

extra features of your middle button, you must install the

included software.

2. Software Installation

A step-by-step guide to getting your mouse set up

WARNING: To avoid damage, turn your computer off before

plugging or unplugging any pointing devices.

Windows®95, Windows®98 and Windows NT®

4.0 Installation

a. Insert the NetMaster™diskette in the A: or B: drive

b. Click on "Start" in the lower left corner of your screen

c. Then click on "Run"

d. Type "A:setup" (or "B:setup") and then click on "OK"

e. Follow the on-screen instructions to complete the

installation of the NetMaster™.

f. To make the process run smoothly:

1. Click on "Next" two times

2. Type in your name and the company's name, then click

on "Next"

3. Click on "Next" two more times

4. Specify if you are using a PS/2 or Serial mouse (refer to

section 1.2) then click on "OK"

5. Select "Yes, I want to restart my computer now" then

click on "Finish"

3. Troubleshooting

Q: When installing the software, which driver should I

choose? The PS/2 Mouse on COM1 or Serial Mouse

on COM2?

A: If you are using a PS/2 mouse (refer to section 1.2) then

the driver must state that it is using a PS/2 driver. If you

are using a Serial mouse (refer to section 1.2) then the

driver must state that it is using a Serial driver on COM1

or COM2.

Q: I can get into Windows®or into "Safe Mode" but I

cannot use the mouse.

A: If you have more than one driver, this could be causing

your computer to boot in safe mode or not allow your

mouse to work at all. If you are using a PS/2 mouse then

the driver must state that it is using a PS/2 driver. If you

are using a Serial mouse then the driver must state that it

is using a Serial driver on COM1 or COM2. If you have a

Serial Mouse and you are not sure whether you are using

COM1 or COM2 then try moving the mouse to another

serial port on the back of your computer, (most computers

have two, if you have only one then it will more than likely

be COM1). If you have more than one driver then you

must remove the excess drivers.

Q: If I have more than one mouse driver how do I remove

the driver without the mouse control? How do I boot

into normal Windows®mode?

A: Use your "Windows®"Key at the bottom left hand corner

of your keyboard if you have one; if not, press "Alt + S" to

go to the "Start" button in Windows®95. Then use your

3. Troubleshooting (continued)

"Up" Arrow to select "Settings" then use your "Right"

Arrow to select "Control Panel" and then press "Enter".

These steps have taken you to the "Control Panel"

where you can gain access to your "Device Manager".

The "Device Manager" shows your driver status

and information and it will allow you to modify

their settings.

After entering the "Control Panel" use your "Up" and

"Down" Arrows to select, "System" and then press

"Enter". After entering "System Properties" use your

"Right" Arrow to select "Device Manager". Then press

Tab until you have selected "Computer" and then use

the "Down" Arrow until your "Mouse" is highlighted.

Then use your "Right" Arrow to expand and select your

mouse driver or drivers.

After you have chosen your mouse driver you can now

modify it by removing the driver or changing the driver.

To remove the driver you have selected, use your "Tab"

key until the "Remove" tab is selected. Then press

"Enter". This will remove the driver. Use your "Arrows"

Key to select any other drivers and repeat the process

until all but one driver remains. Even if it is the wrong

driver you can use it and change it to the mouse driver

you want.

After removing or changing the mouse driver, use your

"Tab" key until "Close" is selected and then press

"Enter". Then you will have to reboot your computer.

3. Troubleshooting (continued)

Use your "Windows®"Key at the bottom left hand corner

of your keyboard if you have one; if not, press "Alt + S".

Then use the "Up" Arrow to select "Shut Down" and use

your "Enter" key. Use your "Arrow" Key to select

"Restart" and press "Enter".

Q: After installing the mouse driver and rebooting, my

mouse will not work. How do I change the mouse driver

without mouse control?

A: Use your "Windows®"Key at the bottom left hand corner

of your keyboard if you have one; if not, press "Alt + S" to

go to the "Start" button in Windows®95. Then use your

"Up" Arrow to select "Settings" then use your "Right"

Arrow to select "Control Panel" and then press "Enter".

These steps have taken you to the "Control Panel" where

you can gain access to your "Device Manager". The

"Device Manager" shows your driver status and

information and it will allow you to modify their settings.

After entering the "Control Panel" use the "Up" and

"Down" Arrows to select "System" and then press

"Enter". After entering "System Properties" use the

"Right Arrow" to select "Device Manager". Then press

"Tab" to bring your selection to "Computer" and then use

the "Down" Arrow until your "Mouse" is highlighted. Then

use your "Right" Arrow to expand and select your mouse

driver or drivers. After you select the mouse driver, use

your "Tab" key to select "Properties" and then press

"Enter". Use your "Right" Arrow key to choose the

"Driver" tab and then use your "Tab" key to choose

3. Troubleshooting (continued)

"Update driver" or "Change Driver" and then

press "Enter".

The next options will vary from computer to computer

because there are many types of Windows®95/98 OS

versions. The wording or options will be a little different

but should be somewhat the same.

Windows®will then continue to ask questions and help

guide you through the changes. Use your "Arrow" Keys,

"Enter", and "Tab" keys to continue through the

process. Windows“ may or may not start searching for

Plug-and-Play devices right away and it may or may not

find anything new. If it does not find anything new it will

ask you another line of questions and if it does find

something new choose something similar to "This

Device is not in the list".

Windows®will then ask if you want Windows®to search

for a new device or will ask if you want to select a driver

from a list. You will want to choose a device or driver

from a list. Use your "Arrow", "Tab" and "Enter" keys

to navigate and finish till the end of questioning. After

finishing, Windows®may or may not ask you to reboot

your computer. Yes, you will want to restart your

computer. If it does not ask you to restart your

computer you will have to close "System Properties".

Use the "Tab" key until "Close" is selected and then

press "Enter". Then you will have to reboot your

computer. Use your "Windows®"Key at the bottom left

hand corner of your keyboard if you have one; if not,

3. Troubleshooting (continued)

press "Alt + S". Then use the "Up" Arrow to select "Shut

Down" and use your "Enter" key. Use the "Arrow" Key to

select "Restart" and press "Enter".

Q: Why does my external mouse not work with my laptop

computer?

A: You may have to disable the onboard mouse in order to

use an external mouse. Try looking in your CMOS or BIOS

in order to disable the onboard mouse. If you do not have

this option or do not know how to get into your BIOS or

CMOS, please follow the instructions in your computer

manual or call the computer dealer/technical support for

your computer.

Inhaltsverzeichnis

Andere Belkin Maus Handbücher

Belkin

Belkin F8E845ea Bedienungsanleitung

Belkin

Belkin ClassicMouse F8E201 Bedienungsanleitung

Belkin

Belkin MiniWireless F8E874 Bedienungsanleitung

Belkin

Belkin P74279ea Bedienungsanleitung

Belkin

Belkin F5L017-USB Bedienungsanleitung

Belkin

Belkin F5L075USB Bedienungsanleitung

Belkin

Belkin F8E825-USB Bedienungsanleitung

Belkin

Belkin F8E825-USB Bedienungsanleitung

Belkin

Belkin F8E874EA Bedienungsanleitung

Belkin

Belkin ClassicMouse F8E201-BLK Bedienungsanleitung

Belkin

Belkin F8E729 Bedienungsanleitung

Belkin

Belkin NOSTROMO N30 Bedienungsanleitung

Belkin

Belkin F8E850-OPT - Optical Mouse Bedienungsanleitung

Belkin

Belkin F8T041-B Bedienungsanleitung

Belkin

Belkin MiniScroller F8E841-BLK Bedienungsanleitung

Belkin

Belkin ErgoMouse F8E203-BLK Bedienungsanleitung

Belkin

Belkin MiniWireless F8E874 Bedienungsanleitung

Belkin

Belkin F8T041-B Bedienungsanleitung

Belkin

Belkin COMFORT MOUSE Bedienungsanleitung

Belkin

Belkin ErgoFit P74278 Bedienungsanleitung

Belkin

Belkin F8E800 series Bedienungsanleitung

Belkin

Belkin AeroCruiser F8E888 Bedienungsanleitung

Belkin

Belkin WIRELESS OPTICAL USB MOUSE Bedienungsanleitung

Belkin

Belkin M450 Bedienungsanleitung

Beliebte Maus Handbücher anderer Marken

Sven

Sven RX-G720 Bedienungsanleitung

3DConnexion

3DConnexion CadMouse Pro Bedienungsanleitung

Canyon

Canyon Puncher GM-20 Bedienungsanleitung

Sharkoon

Sharkoon Light2 180 Bedienungsanleitung

Cherry

Cherry MW 8C ERGO Bedienungsanleitung

NGS

NGS HIT RB Bedienungsanleitung

Sharkoon

Sharkoon FireGlider Bedienungsanleitung

Lenovo

Lenovo Wireless Mouse N3902 Bedienungsanleitung

BASETech

BASETech BN-S11 Bedienungsanleitung

Dell

Dell WM326 Bedienungsanleitung

Areson

Areson B213 Bedienungsanleitung

HP M17587-371 Bedienungsanleitung

Chatpen

Chatpen CHA-30 Bedienungsanleitung

GAMDIAS

GAMDIAS DEMETER GMS5000 Bedienungsanleitung

HP KJ453AA - Wireless Laser Mouse Bedienungsanleitung

Trust

Trust GRAPHIN GXT 960 Bedienungsanleitung

Lenovo

Lenovo SD-9082 Bedienungsanleitung

Alienware

Alienware AW320M Bedienungsanleitung