Belkin F1DS102Jea Bedienungsanleitung
User Manual
F1DS102Jea
F1DS104Jea
OmniView®SOHO KVM
Switch with Audio
PS/2 and USB Console and Host Support
Table of Contents
1. Introduction ............................................................................... 1
Package Contents.............................................................1
2. Overview...................................................................................... 2
Feature Overview ..............................................................2
Equipment Requirements ..................................................3
Unit Display Diagrams.......................................................4
Specifications ...................................................................5
3. Installing the KVM Switch ............................................................ 6
Pre-Configuration..............................................................6
Connecting the KVM Switch ..............................................7
Audio and Microphone Connections ..................................8
Powering Up the Systems .................................................9
4. Using the KVM Switch ................................................................ 10
Selecting a Computer Using
Direct-Access Port Selectors........................................... 10
Selecting a Computer Using
Keyboard Hot-Key Commands ........................................ 10
Hot-Key Preceding Sequence Configuration .................... 11
Hot Key Quick Reference Table....................................... 12
Switching the Audio/Mic ................................................. 13
5. Firmware-Upgrade Guide .......................................................... 14
Upgrade Using the Windows Version Utility .....................14
Upgrade Using the Mac Version Utility ............................ 18
6. FAQs .......................................................................................... 24
7. Troubleshooting......................................................................... 26
Firmware-Upgrade Troubleshooting................................. 30
8. Information................................................................................ 31
11
OmniView
SOHO KVM
Switch with Audio
2/4 SOHO
USB/PS2
Cable Kits, 6 ft.
(1.8 meters)
User Manual Quick Installation
Guide
Power Supply
9V, 1.1A DC Adapter
With UK and European
Plug
section
Introduction
Congratulations on your purchase of the Belkin OmniView SOHO KVM Switch
with Audio. Our diverse line of quality KVM solutions exemplifies the Belkin
commitment to delivering high-quality, durable products at a competitive price.
Engineered to give you control over multiple computers/servers from one
console, Belkin KVM Switches come in a variety of capacities suitable for all
configurations, large or small. This compact, affordable Belkin OmniView KVM
Switch is backed by a Belkin 3-Year Warranty and free technical support.
This User Manual will provide details about your new Switch, from installation
and operation, to troubleshooting—in the unlikely event of a problem. For easy
installation, please refer to the Quick Installation Guide included with your
KVM Switch.
Thank you for purchasing the Belkin OmniView SOHO KVM Switch with Audio.
We appreciate your business and have confidence that you will soon see for
yourself why over 1 million Belkin OmniView KVM Switches are being
used worldwide.
Package Contents
2
Overview
Feature Overview
Video Resolution
The SOHO KVM Switch is able to support video resolutions of up to 2048x1536 so
you can use the latest in video display technology for all your computers.
Flash Upgrade
With the firmware-upgrade feature, your investment in the KVM Switch is further
ensured and its lifetime value is maximized. You don’t have to change your
KVM Switch to solve compatibility problems since you can solve them with easy
firmware upgrades. A special upgrade cable is not needed; you can use the same
KVM cable that connects your computer.
Speaker/Microphone Support
The SOHO KVM Switch allows you to share one set of speakers and one
microphone with all your computers, so you won’t need to unplug and reconnect
your speakers and microphone every time you switch access from one computer
to the next.
Direct-Access Port Selectors
Direct-access port selectors, conveniently located on the front face of the SOHO
KVM Switch, allow you to easily switch access from one computer to the next. You
can change the KVM port or the audio/mic using these buttons.
Cables
All the required cables are 6 feet in length and are included in the box for easier
installation. The cables are also smaller and easier to manage.
LED Display
There are two LEDs on each button. One indicates which port the KVM is on and
the other indicates which port the audio/mic is on.
3
section
Overview
Equipment Requirements
Operating Systems
OmniView SOHO KVM Switches with Audio are for use on CPUs using:
Platforms
Windows®2000, XP, Vista®, Server 2003
DOS
Linux®
Novell®NetWare®4.x/5.x
Mac OS®* X v10.x
*with USB support
Keyboards
Supports 101-/102-/104-/107-key keyboards
Mice
Mice with 2, 3, 4, or 5 buttons,
compatible with Microsoft®
Note: Mouse software is not supported
Monitor
VGA
SVGA
MultiSync®
Microphone
Multimedia microphone/stereo with 3.5mm connectors
Audio
Multimedia speaker/stereo with 3.5mm connectors
Power Supply
9V, 1.1A DC power supply is required
4
Overview
4
Unit Display Diagrams
Front View
Back View
Audio/Mic Switch
KVM Switch
DC Power Jack
1st Computer
Audio/Mic
Console Jacks Audio/Mic
Console Jacks USB Console
Port
PS/2
Console
Port
VGA Console
Port
1st Computer
Port
2nd Computer
Port
3rd Computer
Port
4th Computer
Port
Additional Computer Audio/Mic Console Jacks
Port Indicators
5
section
Overview
5
Specifications
Part No.: F1DS102Jea, F1DS104Jea
Power: 9V, 1.1A DC adapter with center pin-positive polarity
PCs Supported: 2 (F1DS102Jea), 4 (F1DS104Jea)
Console Keyboard: PS/2 & USB
Console Mouse: PS/2 & USB
Monitor Supported: VGA and SVGA MultiSync, LCD
Max Resolution: 2048x1536@85Hz
Audio Input/Output: 3.5mm jack
Microphone Input/Output: 3.5mm jack
VGA Port: 15-pin HDDB type
LED Indicators: 4 (F1DS102Jea), 8 (F1DS104Jea)
Enclosure: High-impact plastic
Dimensions: F1DS102Jea
12.5 (L) x 5.5 (W) x 5.5 (D) in.
(317.5 x 139.7 x 139.7mm)
F1DS104Jea
12.5 (L) x 5.5 (W) x 5.5 (D) in.
(317.5 x 139.7 x 139.7mm)
Weight: F1DS102Jea
1.48 lbs. (0.67kg)
F1DS104Jea
1.50 lbs. (0.68kg)
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Humidity: 0-80% RH, non-condensing
Warranty: 3 years
Note: Specifications are subject to change without notice.
66
Installing the KVM Switch
Pre-Configuration
Where to Place the KVM Switch
The compact size of the KVM Switch makes it perfect for desktop placement.
Consider the following when deciding where to place the KVM Switch: whether
or not you intend to use the direct-access port selectors; the length of the cables
attached to your keyboard, mouse, and monitor; the location of your CPUs from
your console; and the length of the cables you use to connect your computers to
the KVM Switch.
Cable-Distance Requirements
For PS/2 computers: VGA signals are best retained when transmitted up to 25 feet
(7.6m). Beyond 25 feet (7.6m), probability of video degradation increases with an
increase in distance. For this reason, your PS/2 computer should be placed within
25 feet (7.6m) of the KVM Switch.
For USB computers: USB signals can be transmitted up to 15 feet (4.6m) between
the KVM Switch and the CPU. Beyond 15 feet (4.6m), probability of signal failure is
likely.
Cautions and Warnings
Avoid having cables near fluorescent lights, air-conditioning equipment, or
machines that create electrical noise (e.g., vacuum cleaners).
Single-Switch Installation
This section provides complete instructions for the hardware setup of a single KVM
Switch. (F1DS102Jea or F1DS104Jea)
Important Note: Before attempting to connect anything to the KVM Switch or
into your computer(s), make sure that everything is powered off. Plugging and
unplugging cables while computers are powered on may cause irreversible damage
to the computers and KVM Switch. Belkin will not be responsible for damage
caused by these actions.
Cable/model types:
PS/2 and USB models use: VGA/USB/PS/2 combo cable connected to the USB or
PS/2 connector of the host PC
7
section
Installing the KVM Switch
Connecting the KVM Switch
Note: If you are using a PS/2 computer: Please make sure that all of your PS/2
computers are powered off before connecting to the KVM Switch. Otherwise, the
KVM Switch system might not be properly set up. However, USB computers do
not have this limitation.
Step 1
Connect the shared keyboard,
mouse, and monitor to the console
port on the rear of the KVM Switch.
Step 2
Connect your PS/2 computer
to a computer port on the rear
of the KVM Switch.
Step 3
For USB computers, use
the special USB PS/2 KVM
cable (with the USB-to-PS/2
adapter) for connection to a USB computer
(PS/2 computer).
Note: The special KVM cable provides a PS/2 keyboard connector, a USB
connector, and an HDB video connector for the computer connection. When
connecting to a USB computer, just plug the USB connector to it and leave the
PS/2 connector dangling free. When connecting to a PS/2 computer, just add one
USB-to-PS/2 adapter to the USB connector and you’ll have a PS/2 connector for
the mouse.
Do NOT connect the USB connector and the PS/2 keyboard connector to a
computer at the same time.
8
Installing the KVM Switch
Audio and Microphone Connections
Note: Speakers and microphones are not required for use of your KVM Switch.
Connect the Audio
1. Using the audio cable attached to your speakers, connect the male 3.5mm
plug to the lime audio jack in the “Console” section of the KVM Switch.
2. Using the mic cable attached to your microphone, connect the male 3.5mm
plug to the pink mic jack in the “Console” section of the KVM Switch.
3. Using the SOHO USB Cable Kit, connect one end of the lime male 3.5mm
plug to the speaker jack of your sound card or computer, and connect the
other end to the audio jack of the KVM Switch.
4. Using the KVM Cable, connect one end of the pink male 3.5mm plug to the
mic jack of your sound card or computer, and connect the other end to the
pink mic jack of the KVM Switch.
Andere Handbücher für F1DS102Jea
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Belkin Schalten Handbücher
Belkin
Belkin F5U304 Bedienungsanleitung
Belkin
Belkin OmniView PRO3 PS/2 Bedienungsanleitung
Belkin
Belkin OmniView Secure KVM Switch Bedienungsanleitung
Belkin
Belkin F5U261 Bedienungsanleitung
Belkin
Belkin F1U115E - AutoSwitch 2 Port Switch Bedienungsanleitung
Belkin
Belkin F1DG102U - Flip USB With Audio KVM Bedienungsanleitung
Belkin
Belkin OmniView F1DS102P Technisches Handbuch
Belkin
Belkin F1DK102UUK Bedienungsanleitung
Belkin
Belkin 4x4 USB Peripheral Switch Bedienungsanleitung
Belkin
Belkin USB 4-Port Plus Hub Bedienungsanleitung
Belkin
Belkin F1DF102UEA Bedienungsanleitung
Belkin
Belkin OmniView F1DJ102P-B Bedienungsanleitung
Belkin
Belkin F5U237 Bedienungsanleitung
Belkin
Belkin F5L009EA Gebrauchsanweisung
Belkin
Belkin F5D5130-5 Bedienungsanleitung
Belkin
Belkin OmniView F1DB102P Bedienungsanleitung
Belkin
Belkin BusStation F5U1000 Bedienungsanleitung
Belkin
Belkin F1DN002MOD-KM-4 Bedienungsanleitung
Belkin
Belkin OmniView F1D074 Bedienungsanleitung
Belkin
Belkin F1U126-KIT Bedienungsanleitung
