Belkin OmniCube Bedienungsanleitung

OMNICUBE 2-Port Switch with Built-In Cabling

Switch OMNICUBE 2 Ports avec Câbles Intégrés

OMNICUBE 2- ach Switch mit integrierter Kabelgarnitur

OMNICUBE 2-poorts switch met geïntegreerde kabels

OMNICUBE Conmutador de 2 puertos

con cableado incorporado

Switch a 2 porte OMNICUBE con cablaggio incorporato

User Manual

Manuel de l’utilisateur

Benutzerhandbuch

Handleiding

Manual de Usuario

Manuale dell’utente

F1DK102P

Control two computers using

one video monitor, and a PS/2

keyboard and mouse

Contrôler deux ordinateurs avec un

écran, un clavier et une souris PS/2

Kontrollieren Sie wei Computer mit einem

Monitor und einer PS/2-Tastatur und -Maus

Beheer twee computers met slechts

één monitor, PS/2-toetsenbord en muis

Controla dos ordenadores utili ando

un monitor de vídeo, un teclado PS/2 y un ratón

Per permettere di utili are due computer mediante un

singolo monitor, tastiera PS/2 e mouse

P74242ea-F1DK102P-man.qxd 01-04-2003 16:18 Page 1

All manuals and user guides at all-guides.com

all-guides.com

OMNICUBE 2-Port Switch

with Built-In Cabling

User Manual

F1DK102P

Control two computers using one video monitor,

and a PS/2 keyboard and mouse

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 2

All manuals and user guides at all-guides.com

The Belkin 2-Port KVM Switch with Built-In Cabling allows you to control multiple

computers with one keyboard, monitor, and mouse. The Switch supports PS/2 input

devices (keyboard and mouse), VGA, SVGA, XGA, and PS/2 computers.

Feature Overview

Complete Compact Solution

Built-in cables and color-coded connectors make operation and organization easy.

Hot Keys

Hot keys allow you to select ports using designated key commands. Control multiple

computers using a simple hot key sequence on your keyboard.

AutoScan

The AutoScan feature allows you to automatically scan and monitor the activities

of all operating computers connected to your Switch one by one.

Video Resolution

The Switch is able to support video resolutions of up to 2048x1536@65Hz. To

preserve signal integrity at high resolutions, 75-Ohm coaxial VGA cabling is

built-in to your Switch.

Light-Emitting Diode Display

LEDs on the top of the Switch function as status monitors. The LEDs light to

indicate which corresponding monitor port is currently active.

OVERVIEW

Overview

Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Unit Display Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installation

Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Step-By-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Using Your Switch

Powering Up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

TABLE OF CONTENTS

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 4

All manuals and user guides at all-guides.com

OVERVIEW

Operating Systems

Your Switch is for use on CPUs using:

Platforms

• Windows® 95, 98, 2000, Me, NT®, XP

• DOS

• Linux®

• Novell® NetWare® 4.x/5.x

Keyboards

• Supports 101-, 102-, and 104-key keyboards

Mice

• Microsoft® system-compatible PS/2 mice with 2, 3, 4, or 5 buttons

Monitors

• VGA

• SVGA

• MultiSync®

OVERVIEW

Port Status

Indicator LEDs

The 2-Port KVM Switch with Built-In Cabling:

Console

Mouse Port

Unit Display Diagram

Built-In Cables

Console

Keyboard Port

Console VGA

Monitor Ports

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 2

All manuals and user guides at all-guides.com

Step-by-Step Installation Guide

This section provides complete instructions for the hardware setup of a

single Switch.

Important Note

Before attempting to connect anything to the Switch or to any computer, make

sure that everything is powered off. Plugging and unplugging cables while

computers are powered on can cause irreversible damage to your computers,

data, and/or to the Switch. Belkin Corporation will not be responsible for damage

caused in this way.

Connecting the Console

1. Power down all computers.

2. Connect your PS/2-type keyboard

and mouse to the KEYBOARD and

MOUSE ports located on the front

panel of your Switch.

3. Take the VGA cable that is

attached to your monitor and

connect it to the VGA port on the

front panel of the Switch.

INSTALLATIONINSTALLATION

Pre-Configuration

Where to Place the Switch

The Switch is designed for positioning on the desktop. The exact placement will

be based on the location of your CPUs and length of your cables.

Cable Distance Requirements

For PS/2 computers: VGA signals are best retained when transmitted up to eight

feet. Beyond eight feet, probability of video degradation increases with an

increase in distance. For this reason, your PS/2 computer should be placed

within eight feet of the KVM Switch.

Note: If your computer needs to be more than eight feet from the KVM Switch, you

can use the Belkin CAT5 Extender (part number F1D084) to extend your PS/2

keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using a

standard CAT5 UTP cable.

Cautions and Warnings

Avoid placing cables near fluorescent lights, air conditioning equipment, or

machines that create electrical noise (e.g., vacuum cleaners).

INSTALLATION

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 4

All manuals and user guides at all-guides.com

Powering Up the Systems

Once all cables have been connected, power up your CPUs that are attached to

the Switch. All computers can be powered on simultaneously. The Switch

emulates a mouse and keyboard on each port and will allow your computer to

boot normally. Your Switch should now be ready for use.

You can select which computer to operate through hot key commands. Note that

it will take 1-2 seconds for the video to display after switching. This is due to

the refresh of the video signal. A re-synchronization of the mouse and keyboard

signal also takes place. This is normal operation and ensures that proper

synchronization is established.

You can conveniently change ports on the Switch through a keyboard command

sequence using the “SCROLL LOCK” key and up and down arrow keys. To send

commands to the Switch, press the “SCROLL LOCK” key twice within two seconds.

You will hear a beep for confirmation. Then you can press the up or down arrow

keys to switch between ports.

USING YOUR SWITCH

Switch to next active port,

up arrow

Switch to previous active port,

down arrow

Connecting the Computer

1. Using the attached cables, take the VGA cable and connect it to

the VGA port on the first computer.

2. Connect the PS/2 keyboard KVM cable to the keyboard port on

the computer.

3. Connect the PS/2 mouse KVM cable to the mouse port on

the computer.

Repeat Steps 1 through 3 for the additional computer to be connected to

the Switch.

INSTALLATION

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 6

All manuals and user guides at all-guides.com

all-guides.com

You can switch directly to any port by entering the Switch port number you wish

to use. For example, if you press “SCROLL LOCK”, “SCROLL LOCK”, “2”, the

computer on port 2 will be selected.

AutoScan Mode

In AutoScan mode, the Switch remains on one port for eight seconds before

switching to the next. This time interval cannot be changed.

To enable AutoScan mode, press “SCROLL LOCK”, “SCROLL LOCK”, “S”.

Note: There is no mouse or keyboard control in this mode by design, in order to

prevent errors. If it were enabled, the user could move the mouse or use the

keyboard while the KVM Switch is switching to the next port. This could interrupt

communication between the computer and Switch that might cause erratic mouse

movement, or result in errant display of characters when using the keyboard.

To disable AutoScan mode, press the space bar.

USING YOUR SWITCH

Switch to Port 2—(2)

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 8

All manuals and user guides at all-guides.com

Switch OMNICUBE 2 Ports

avec Câbles Intégrés

Guide de l’Utilisateur

F1DK102P

Contrôler deux ordinateurs avec un écran,

un clavier et une souris PS/2

Belkin Corporation

501 West Walnut Street

Compton • CA • 90220 • USA

Tel: +1 310.898.1100

Fax: +1 310.898.1111

Belkin Components, Ltd.

Express Business Park • Shipton Way • Rushden

NN10 6GL • United Kingdom

Tel: +44 (0) 1933 35 2000

Fax: +44 (0) 1933 31 2000

Belkin Components B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk • The Netherlands

Tel: +31 (0) 20 654 7300

Fax: +31 (0) 20 654 7349

Belkin GmbH

Hanebergstrasse 2

80637 München • Germany

Tel.: +49 (0) 89 1434050

Fax: +49 (0) 89 143405100

Belkin Tech Support

US: +1 310.898.1100 ext. 2263

+1 800.223.5546 ext. 2263

Europe: 00 800 223 55 460

Australia: 1800 666 040

P74242

All trade names are registered trademarks of respective manufacturers listed.

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 10

All manuals and user guides at all-guides.com

Le Switch KVM 2 Ports avec Câbles Intégrés de Belkin vous permet de contrôler plusieurs

ordinateurs avec un seul clavier, écran et souris. Le Switch prend en charge des

périphériques d’entrée (clavier et souris) et des ordinateurs VGA, SVGA, XGA et PS/2.

Vue d’Ensemble des Caractéristiques

Une Solution Complète

et Compacte de câbles intégrés et de connecteurs à code de couleurs rendent le

fonctionnement et l’organisation simple.

Touches de Raccourci

Les touches de raccourci vous permettent de sélectionner les ports en utilisant des

commandes clavier. Contrôlez plusieurs ordinateurs d’une simple commande clavier.

AutoScan

La fonction AutoScan vous permet de scanner automatiquement et de surveiller

les activités des ordinateurs utilisés connectés à votre Switch, un par un.

Résolution Vidéo

Le Switch est capable de prendre en charge des résolutions vidéo allant jusqu’à

2048x1536 @65Hz. Afin de préserver l’intégrité du signal à de hautes

résolutions, un câble coaxial VGA 75 Ohm est intégré à votre Switch.

Affichage à Diodes Électroluminescentes (LED)

Les LED sur le haut du Switch contrôlent les écrans. Les LED indiquent

quel port d’écran est actuellement actif.

VUE D’ENSEMBLE

Vue d’Ensemble

Vue d’Ensemble des Caractéristiques . . . . . . . . . . . . . . . . . . . . . . . . . .1

Systèmes d’Exploitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Diagramme de l’Affichage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installation

Pré-configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Manuel d’Installation Étape par Étape . . . . . . . . . . . . . . . . . . . . . . . . .5

Utiliser votre Switch

Mettre les Systèmes en Marche . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Mode AutoScan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

SOMMAIRE

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 12

All manuals and user guides at all-guides.com

VUE D’ENSEMBLE

Statut des Ports

Diodes de Contrôle

Le Switch KVM 2 Ports avec Câbles Intégrés

Console

Port Souris

Diagramme de l’Affichage

Câbles Intégrés

Console

Port Clavier

Console VGA

Ports Écran

Systèmes d’Exploitation

Votre Switch est utilisé sur des ordinateurs fonctionnant sous :

Plateformes

• Windows® 95, 98, 2000, Me, NT®, XP

• DOS

• Linux®

• Novell® NetWare® 4.x/5.x

Claviers

• Prend en charge les claviers 101, 102 et 104

Souris

• Souris compatible avec les systèmes Microsoft® PS/2 avec 2,3,4 ou 5 boutons

Écrans

• VGA

• SVGA

• MultiSync®

VUE D’ENSEMBLE

P74242ea-F1DK102P-man.qxd 01-04-2003 16:19 Page 2

All manuals and user guides at all-guides.com

Andere Handbücher für OmniCube

Inhaltsverzeichnis

Sprachen:

Andere Belkin Schalten Handbücher

Belkin

Belkin F4U006 - Travel USB Hub Bedienungsanleitung

Belkin

Belkin F5U303 Bedienungsanleitung

Belkin

Belkin Switch Bedienungsanleitung

Belkin

Belkin F1DN002MOD-KM-4 Bedienungsanleitung

Belkin

Belkin OmniView F1DP104Aea Bedienungsanleitung

Belkin

Belkin F1DJ104P-B Bedienungsanleitung

Belkin

Belkin F1DN102K-3 Bedienungsanleitung

Belkin

Belkin F1DG102Wuk Bedienungsanleitung

Belkin

Belkin OmniView Professional Series Bedienungsanleitung

Belkin

Belkin Switch2 DVI-D Bedienungsanleitung

Belkin

Belkin OmniView E Series Bedienungsanleitung

Belkin

Belkin OmniView F1DN102DEA Bedienungsanleitung

Belkin

Belkin F5L009 - Network USB Hub Bedienungsanleitung

Belkin

Belkin F5U302 - Wireless USB Hub Bedienungsanleitung

Belkin

Belkin F1DN108K-3 Bedienungsanleitung

Belkin

Belkin OmniView F1DD102Lea Bedienungsanleitung

Belkin

Belkin OmniView F1DD102Lea Bedienungsanleitung

Belkin

Belkin OmniView F1DP108G Referenzhandbuch

Belkin

Belkin OmniView SOHO F1DS102L Bedienungsanleitung

Belkin

Belkin FSU234ea Bedienungsanleitung

Belkin

Belkin OmniView 5216K Bedienungsanleitung

Belkin

Belkin USB PERIPHERAL SWITCH Bedienungsanleitung

Belkin

Belkin OmniView SOHO F1DS104J Bedienungsanleitung

Belkin

Belkin OMNIVIEW F1DN102D Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung