Bellfires VERTICAL BELL SMALL TUNNEL 3 CF Leitfaden
INSTALLATION INSTRUCTIONS &
MANUAL FOR MAINTENANCE
VERTICAL BELL SMALL
TUNNEL 3 CF/LF
Gas •res with closed combustion system
This document is an essential part of your gas •re.
Read it carefully before installation and maintenance of the
gas •re and keep it in a safe place!
Bell•res wishes you many cosy evenings with your new Bell•res gas •re
Serial number:
Production date:
3
English
Installation instructions
BELLFIRES GAS FIRE WITH CLOSED COMBUSTION SYSTEM:
Vertical Bell Small Tunnel 3 CF (Centre Fire) (VBST3 CF)
Vertical Bell Small Tunnel 3 LF (Line Fire) (VBST3 LF)
4
English
Installation instructions
IMPORTANT
These Installation Instructions form part of the documentation pack supplied
with the appliance.
The complete documentation, necessary for the installation of the appliance,
consists of:
1. INSTALLATION INSTRUCTIONS &
MANUAL FOR MAINTENANCE
2. CONCENTRIC COMPONENTS SUITABLE FOR THE INSTALLATION
OF A BELLFIRES GAS FIRE WITH CLOSED COMBUSTION
3. INSTRUCTIONS FOR USE &
MANUAL DAILY MAINTENANCE
5
English
Installation instructions
The installation must only be carried out by a
“Gas Safe Register” registered installation engineer.
IMPORTANT
CONTENTS
Page
1. INSTALLATION INSTRUCTIONS .............................................................. 7
2. MAINTENANCE .....................................................................
...................
. 47
3. FAULTS ...................................................
.................................
...
.
...
..........
. 49
4. DISMANTLING / ASSEMBLING OF THE GLASS
.
....................
.
..
...
.......
... 50
5. DIAGRAM ELECTRICITY AND GAS ........................
........................
......... 56
6. DIMENSIONS ......................................................
..............................
....
....
. 57
7. TECHNICAL DETAILS/REGULATIONS .....................................
..
..
...
......... 67
8. REPLACEMENT PARTS LIST .........................................
..........
..
...
..
.
........ 71
9. DISPOSAL OF PACKAGING AND APPLIANCE .........
......................
...
.....
. 74
6
English
Installation instructions
7
English
Installation instructions
1 INSTALLATION INSTRUCTIONS
1.1 GENERAL
The gas fire must be positioned and connected as a “room sealed system” (balance
flue) appliance by a “Gas Safe Register” registered gas installation engineer in
accordance with the following installation instructions, nationally and locally applicable
regulations (see “Technical Details/ Regulations” at the rear of this manual). If you have
any queries regarding the installation, please consult your local gas company.
Important: Before beginning the installation, check that the details on the
rating plate correspond to the gas type and pressure to which
the appliance will be connected.
The appliance is supplied with a “Centre Fire” or “Line Fire” double burner, as ordered.
These burners each have their own specific flame image which is defined by the
perforation pattern in the burner cover. See Chapter 5 and the Instructions for use.
The appliance is factory set to the correct nominal heat input. The pilot light is set to the
correct level of consumption.
Depending on the requested version, the appliance will be delivered from the factory
with a Ø100 mm - Ø150 mm or Ø130 mm - Ø200 mm concentric connection for
extracting the flue gases and supply of combustion air.
It is possible to install the gas fire with either a wall or roof outlet.
The roof connection must be carried out using the concentric flue system Ø100 mm -
Ø150 mm. The fumes are exhausted naturally to the outside environment through the
inner Ø100 mm pipe whereas the combustion air supply passes between the Ø100 mm
and Ø150 mm pipes.
The wall connection must be carried out using the concentric flue system Ø130 mm -
Ø200 mm. The flue gases are evacuated outside by means of natural draft through the
internal pipe of Ø130 mm, whereas the combustion air is supplied between the pipes of
Ø130 mm and Ø200 mm. The wall outlet itself is, depending on the concentric flue gas
system configuration, Ø100 mm - Ø150 mm or Ø130 mm - Ø200 mm. (In some cases,
with a wall connection, a complete concentric flue system Ø100 mm - Ø150 mm is also
possible (see Chapter 1.6.1).)
The gas fire can be installed in a completely sealed or mechanically ventilated house
without extra ventilation and/or fume extraction.
The gas fire is installed as a built-in appliance in a fireplace.
In order to prevent the !replace heating up excessively, it must be properly
ventilated by installing vents at the top and bottom of the fireplace.
8
English
Installation instructions
The appliance can be fitted with a convection package as an optional extra. This is a
convection top plate for on top of the appliance, two flexible aluminium pipes and two
built-in convection vents. This enables hot air to be circulated into the room.
If an existing chimney is to be used, please consult your installer first. If the chimney
was previously used for a wood or coal fire, then it should be cleaned by an expert.
1.2 CONCENTRIC FLUE SYSTEMS Ø100 MM - Ø150 MM AND
Ø130 MM - Ø200 MM: • Bell!res - Muelink & Grol System
• Poujoulat - PGI Ssystem
• Ontop - Metaloterm US System
• Jeremias/STB - H-Twin System (STB = Chimney-
Technics Brummen NL)
• Jeremias - TWIN-GAS System
The gas fire, in combination with the concentric flue system [Ø100 mm - Ø150 mm]
and/or [Ø130 mm - Ø200 mm] (rigid and/or flexible)
for the brand types mentioned
above, has been approved in accordance with the European CE-norm for gas
appliances and may therefore be used only with these systems.
The permitted components for these systems are listed in instructions enclosed:
CONCENTRIC COMPONENTS SUITABLE FOR THE INSTALLATION OF A
BELLFIRES GAS FIRE WITH CLOSED COMBUSTION. The guarantee on the
appliance lapses if it is installed, fully or partially, with other components or a different
flue system.
The concentric flue [Ø100 mm - Ø150 mm] and [Ø130 mm - Ø200 mm] systems can be
used with either a newly-built or existing chimney.
IMPORTANT
Observe the installation instructions, which are supplied
with the components of the concentric flue system.
9
English
Installation instructions
Part no Option
Convection package Vertical Bell Small Tunnel 3
332199 • 1x Top plate Convection
312829 • 1x Convection set General
330361 Set of high adjustable feet (4 pieces)
311960 Mantle iron L = 1000 mm
1.4 OPTIONS AND ACCESSORIES
The following options and accessories can be supplied by your dealer:
N.B. If any part is missing, please contact your dealer.
1.3 INCLUDED
Set documentation - Installation instructions & Manual for maintenance
- Instructions for Concentric Components
- Instructions for use & Manual daily maintenance
Attributes - Ceramic log set, or marble pebbles white
or marble pebbles grey
- Hook (for opening the frame and the glass)
10
English
Installation instructions
Part no Accessorie
302092 Receiver adapter 6 VDC
312829 Convection set General: (for convection air extraction)
302188 • 1x Flexible aluminium pipe Ø125 mm, L= 3 m (max.)
310178 • 2x Fitting box 135 x 135 mm
309872 • 2x Convection exit grid, white, 145 x 145 mm
304040 • 4x Hose clamp Ø125 mm
329874 Set carrying brackets (2 pieces)
3........ Bellfires (M&G) concentric flue system(*)
3........ Poujoulat (DUOGAS) concentric flue system(*)
3........ Ontop (Metaloterm US) concentric flue system(*)
3....... Jeremias/STB - H-TWIN concentric flue system(*)
3....... Jeremias - TWIN-GAS concentric flue system(*)
(*) Please refer to the instructions enclosed:
CONCENTRIC COMPONENTS SUITABLE
FOR THE INSTALLATION OF A BELLFIRES
GAS FIRE WITH CLOSED COMBUSTION
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Bellfires Kamin im Innenbereich Handbücher
Bellfires
Bellfires Smart Bell 75/55 MF Bedienungsanleitung
Bellfires
Bellfires VENTO CLASSIC LARGE Installations- und Betriebshandbuch
Bellfires
Bellfires SB 75 PF Installations- und Betriebshandbuch
Bellfires
Bellfires VENTO CLASSIC SMALL Leitfaden
Bellfires
Bellfires Free Bell Einrichtungshandbuch
Bellfires
Bellfires Smart Bell Panorama 73/52 MF Handbuch
Bellfires
Bellfires HORIZON BELL XS 3 CF Leitfaden
Bellfires
Bellfires VIEW BELL YORK 3 CF Leitfaden
Bellfires
Bellfires HORIZON BELL XXL Einrichtungshandbuch
Bellfires
Bellfires VIEW BELL XXL 3 CF Leitfaden
Bellfires
Bellfires DERBY LARGE 3 PF Gebrauchsanweisung
Bellfires
Bellfires Smart Bell 65/55 MF Betriebsanleitung
Bellfires
Bellfires Smart Bell 65 MF Handbuch
Bellfires
Bellfires horizon bell xl 3 cf Bedienungsanleitung
Bellfires
Bellfires Smart Bell 80 MF Handbuch
Bellfires
Bellfires VIEW BELL LARGE 3 CF Installations- und Betriebshandbuch
Bellfires
Bellfires CLASSIC BELL MEDIUM 3 PF Installations- und Betriebshandbuch
Bellfires
Bellfires SMART BELL 90-80 PF Installations- und Betriebshandbuch
Bellfires
Bellfires Box Gas Panorama 45 Handbuch
Bellfires
Bellfires BM 21 Bedienungsanleitung
